Catalog FORMAT Plus- 2017 - 2018

Drilling tools 100

VHM spiral drill, SuperLine, 5 x D

Design: Ultra-finest grain-solid carbide, DIN 6537, type FT 200. Surface bright, right hand cut, 3 cutting edges with point-like tip, special bevel and special thinning. Normal angle of rake 28°, core thickness thicker than normal and without core gradient. Application: For drilling into the full piece for holes with an accurate position and shape up to 5 x D. Particularly for castings and long chipping al-alloys.

DIN 6537

Type FT 200

Z 3

Solid carbide

DIN 6535-HA

130°

Cutting Tools 1

5xD

28°

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1233

80

180

180

&DVWLURQ PDWHULDOV f mm/rev

&DVWLURQ PDWHULDOV f mm/rev

1233

1233

∅ = m 7 mm

∅ = m 7 mm

Order No.

Spiral length mm

Shank length I 3 mm

Order No.

Spiral length mm

Shank length I 3 mm

Total length mm

Shank ∅ = h 6 mm

Total length mm

Shank ∅ = h 6 mm

bright

bright

0300 0310 0320 0330 0350 0370 0380 0400 0410 0420 0450 0480 0500 0510 0520 0530 0550 0580 0600 0610 0620 0640 0650 0670 0680 0700 0710 0740

3.0 37.50 3.1 37.50 3.2 37.50 3.3 37.50 3.5 37.50 3.7 37.50 3.8 37.50 4.0 37.50 4.1 37.50 4.2 37.50 4.5 37.50 4.8 37.50 5.0 37.50 5.1 37.50 5.2 37.50 5.3 37.50 5.5 37.50 5.8 37.50 6.0 37.50 6.1 45.00 6.2 45.00 6.4 45.00 6.5 45.00 6.7 45.00 ◊ 6.8 45.00 7.0 45.00 7.1 45.00 7.4 45.00

28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 28 36 66 36 36 74 36 36 74 36 36 74 36 36 74 36 36 74 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 44 36 82 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91 53 36 91

6 0.100 6 0.100 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.125 6 0.160 6 0.160 6 0.160 6 0.160 6 0.160 6 0.160 8 0.160 8 0.160 8 0.200 8 0.200 8 0.200 8 0.200 8 0.200 8 0.200 8 0.200

0750 0780 0800 0810 0820 0840 0850 0860 0870 0880 0900 0910 0950 0980 1000 1010 1020 1030 1050 1100 1120 1150 1180 1200 1210 1250 1300

7.5 45.00 7.8 45.00 8.0 45.00 8.1 51.00 8.2 51.00 8.4 51.00 8.5 51.00 8.6 51.00 8.7 51.00 8.8 51.00 9.0 51.00 9.1 51.00 9.5 51.00 9.8 51.00 10.0 51.00 10.1 76.00 10.2 76.00 10.3 76.00 ◊ 10.5 76.00 11.0 76.00 11.2 76.00 11.5 76.00 11.8 76.00 12.0 76.00 12.1 100.00 12.5 100.00 13.0 100.00

53 36 91 8 0.200 53 36 91 8 0.200 53 36 91 8 0.200 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 61 40 103 10 0.250 71 45 118 12 0.250 71 45 118 12 0.250 71 45 118 12 0.250 71 45 118 12 0.250 71 45 118 12 0.250 71 45 118 12 0.250 71 45 118 12 0.250 71 45 118 12 0.250 71 45 118 12 0.250 77 45 124 14 0.250 77 45 124 14 0.250 77 45 124 14 0.315

(W112)

(W112)

POSISTOP Workpiece stop for clamping short parts with a workpiece diameter of 15-130 mm.

Ç 3/10

1/82