Catalog FORMAT Plus- 2017 - 2018

Drilling tools 119

m

Core drills

Design: HSS-Co, AlTiN coated surface, with Weldon shank ∅ 19 mm, 2 carrier surfaces and 1 countersink for Rota-Quick ® . Inner hole 6.35 mm. Application: For use in magnetic base drills and column drills with MK mount. The core drill only machines a thin material ring. The remaining drill core is ejected by a guide and ejector pin using spring force. The chips are quickly moved up for disposal and the risk of breakage minimised. Even large drilling diameters require relatively low amounts of energy. The core drill machines only a small part of the overall area in comparison to the spiral drill. This results in huge savings in power and time.

Cutting Tools 1

HSS Co

1337

bright

HSS

1338

TiAlN

HSS Co

1339

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1337 1338 1339

30 30 30

20 20 20

40 40 40

42 42 42

8

15

12

6

22

1337

1338

1339

1337

1338

1339

Drill ∅

Drill ∅

Order No.

Order No.

mm

mm

bright

TiAlN

TiAlN

bright

TiAlN

TiAlN

1230 1330 1430 1530 1630 1730 1830 1930 2030 2130 2230 2330 2430 2530 2630 2730 2830 2930 3030 3130

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

18.00 18.25 18.40 19.65 21.00 22.30 23.60 24.90 26.20 27.60 26.10 27.30 28.50 29.70 30.80 32.00 33.20 34.40 35.60 36.80 (W123)

15.85 16.05 16.15 17.30 18.50 19.60 20.80 21.90 23.10 24.30 23.00 24.00 25.10 26.10 27.10 28.20 29.20 30.30 31.30 32.30 (W123)

19.55 19.85 19.95 21.40 22.90 24.20 25.70 27.10 28.50 30.00 28.40 29.70 30.90 32.30 33.50 34.80 36.10 37.40 38.60 39.90 (W123)

3230 3330 3430 3530 3630 3730 3830 3930 4030 4130 4230 4330 4430 4530 4630 4730 4830 4930 5030

32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

41.90 43.30 47.70 52.40 53.90 55.40 56.90 58.40 59.90 61.40 63.00 64.40 65.90 67.40 68.90 70.30 71.90 73.40 74.90 (W123)

36.90 38.10 42.00 46.10 47.40 48.80 50.10 51.40 52.70 54.00 55.40 56.70 58.00 59.30 60.60 61.90 63.30 64.60 65.90 (W123)

45.60 47.00 51.90 57.00 58.50 60.30 61.80 63.50 65.10 66.70 68.40 70.00 71.60 73.20 74.90 76.40 78.20 79.80 81.40 (W123)

1/101

Articles marked ◊ are not held in stock, procurement is effected at short notice.