Catalog FORMAT Plus- 2017 - 2018

Countersink tools 129

90° countersinks and deburring countersinks with cylinder Shank

Design: DIN 335-C. 90° countersink angle. Axial and radial taper-ground and CBN deep-ground. With straight, u-shaped clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965 and DIN 966 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped back taper on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated designs.

DIN 335-C

Z 3

90°

Cutting Tools 1

HSS

1430

bright

HSS

1433 TiN

HSS

1434

TiAlN

HSS Co5

1436

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1430 1433 1434 1436

C C C C

C C C C

V V C V

V V V C

C C V V

C C C V

V V C

V V C

1433

1434

1436

1430

Nominal ∅

Order No.

Smallest ∅

Total length

Shank ∅

mm 4.3 5.0 5.3 5.8 6.0 6.3 7.0 7.3 8.0 8.3 9.4 10.0 10.4 11.5 12.4 13.4 15.0 16.5 19.0 20.5 23.0 25.0 28.0 30.0 31.0 40.0

mm 1.3 1.5 1.5 1.5 1.5 1.5 1.8 1.8 2.0 2.0 2.2 2.5 2.5 2.8 2.8 2.9 3.2 3.2 3.5 3.5 3.8 3.8 4.0 4.2 4.2 5.0

mm

mm

bright

TiN

TiAlN

bright

0430 0500 0530 0580 0600 0630 0700 0730 0800 0830 0940 1000 1040 1150 1240 1340 1500 1650 1900 2050 2300 2500 2800 3000 3100 4000

6.30 6.30 8.80 8.80 7.10 7.10 9.90 7.65 7.65 7.65 9.90 8.10 8.10 9.25 9.25

11.20 11.20 13.15 13.15 11.20 11.20 12.10 12.20 12.20 12.20 13.50 13.50 13.50 15.70 15.70 18.00 18.00 19.45 24.70 25.90 34.40 34.40 43.40 43.40 43.40 74.30 (W134)

14.40 14.40 13.70

9.60 9.60 9.60

40 40 40 45 45 45 50 50 50 50 50 50 50 56 56 56 60 60 63 63 67 67 71 71 71 80

4 4 4 5 5 5 6 6 6 6 6 6 6 8 8 8

–

–

13.70 13.80

10.15

8.85

– –

– –

14.95 15.00

10.15

9.55

–

–

16.50 17.35 19.10 20.30 22.00 24.00 30.20 31.90 42.00 42.40 53.10 53.60 74.50 (W134) – –

13.30

9.80

13.30 11.40

11.60 11.60 11.60 16.25 16.25 23.60 23.60 26.20 29.40 29.40 51.20 (W134)

–

12.80 12.80 18.95 17.25 26.30 23.60 27.70 31.30 52.80 (W134) –

10 10 10 10 10 10 12 12 12 15

1/111

Articles marked ◊ are not held in stock, procurement is effected at short notice.