Catalog FORMAT Plus- 2017 - 2018

Reamers 161

Shell holder

Design: DIN 217, cone 1:30. With morse taper shank Scope of supply: withdrawal nut, carrier ring and disc spring DIN 6888. Application: For shell reamers (order no. 1517).

DIN 217

MK 3–4

Cutting Tools 1

1520

Nominal ∅ mm

Order No. 0013 0016 0019 0022

Total length mm

For DIN 219 mm

MK

13 16 19 22

109.00 119.50 143.00 178.00 (W140)

250 261 298 312

25–30 3 31–35 3 36–42 4 44–50 4

Jet reamer set

Design: Made of special steel tool, induction hardened and ground, conical shape. 5-edged, shape with square angling for attachment to the metal holder. Supplied in plastic sleeve. Application: For cleaning nozzles.

1513

Set contents

Order No.

0050 11 reamers ∅ 0.60; 0.65; 0.70; 0.80; 0.85; 0.90; 1.00; 1.30; 1.50; 1.70; 1.90 mm 1 nickel-plated metal holder

24.60

(W175)

Machine reamer

Design: HSS-E, DIN 212-1 (nominal ∅ 1.0–3.5 mm) or DIN 212-2 (nominal ∅ 4.0–20.0 mm), with approx. 7° left spirals, short point and uneven tooth pitch. This achieves clean and exact drilling. With cylinder shank. Tolerance h9. Application: For reaming through holes. Particularly suitable for steel materials such as general construction steels, machine steels, tempered steels, case-hardening steels, tool steels, high speed steels, casting iron, nodular graphite iron and malleable cast iron, and soft non-ferrous metals such as aluminium and brass.

DIN 212-1/2

HSS-E

H7

approx. 7°

1531

bright

1535 TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1531 1535

10 12

8

18

5 5

4

4

6 8

12

10

1531

1535

1531

1535

Nomi- nal ∅ mm

Nomi- nal ∅ mm

Order No.

Cutting length mm

Total length mm

Shank ∅ h9 mm

Order No.

Cutting length mm

Total length mm

Shank ∅ h9 mm

bright

TiN

bright

TiN

0100 0120 0140 0150 0160 0180 0200 0220 0250 0280 0300 0320 0350 0400 0450 0500 0550 0600

1.0* 19.05 1.2* 18.65 1.4* 17.40 1.5* 14.85 1.6* 16.35 1.8* 16.35 2.0* 13.90 2.2* 17.35 2.5* 13.90 2.8* 18.00

– – – – – – – – – –

5.5 7.5 8.0 8.0 9.0 10.0 11.0 12.0 14.0 15.0 15.0 16.0 18.0 19.0 21.0 23.0 26.0 26.0

34 38 40 40 43 46 49 53 57 61 61 65 70 75 80 86 93 93

1.0 1.2 1.4 1.5 1.6 1.8 2.0 2.2 2.5 2.8 3.0 3.2 3.5 4.0 4.5 5.0 5.6 5.6

0650 0700 0750 0800 0850 0900 0950 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000

6.5 17.90 7.0 17.90 7.5 19.85 8.5 23.40 9.0 23.40 9.5 23.50 13.0 37.10 14.0 38.50 15.0 39.60 16.0 41.50 17.0 48.40 18.0 49.70 19.0 58.50 20.0 54.00 11.0 32.10

– – – – – – – – – – – – – – –

28.0 31.0 31.0 33.0 33.0 36.0 36.0 38.0 41.0 44.0 44.0 47.0 50.0 52.0 54.0 56.0 58.0 60.0

101 6.3 109 7.1 109 7.1 117 8.0 117 8.0 125 9.0 125 9.0 133 10.0 142 10.0 151 10.0 151 10.0 160 12.5 162 12.5 170 12.5 175 14.0 182 14.0 189 16.0 195 16.0

8.0 18.40 45.40

10.0 21.80 53.40

12.0 33.30 77.60

3.0* 12.35 35.00

3.2* 17.00 3.5* 14.50

– –

4.0 13.90 35.20

4.5 14.50

–

5.0 14.85 34.00

5.5 16.85

–

6.0 15.10 36.30

(W140)

(W141)

(W140)

(W141)

* Form B

1/143

Articles marked ◊ are not held in stock, procurement is effected at short notice.