Catalog FORMAT Plus- 2017 - 2018

Thread cutting tools 200

V-COIL thread repair assortment

Breaking the pin: After installation, take the insertion tool out and remove the carrier pin with the pin breaker. The pin should be removed with long nose pliers for larger dimensions and spark

Drilling: Bore out damaged thread with normal spiral drills. Boring out is not required for spark plug threads - the combined drilling and cutting tool should be used. Please note that larger holes are required for thread formers. Check: Check the tap and thread bolt for the same thread and gradient. Thread: Cut the mounting thread in the bored out hole with the special V-COIL taps. The use of cutting oil is recommended. Installing the thread insert: Place the insert on the tool and make sure that the carrier pin is in the slot opening and then make the right setting with the adjustment ring. Then turn in the thread insert in the thread direction applying light pressure. Do not turn against the running direction, as the pin can break off.

Cutting Tools 1

plug threads. After completing these steps, a thread is produced that is often better and stronger than the original thread due to the narrow and exact tolerances as well as the spring thread forming. Supplied in plastic cassette: thread extractor, spiral drill in core hole dimensions, tap and thread inserts (1.5 x D). Application: Thread armouring of materials with low shearing resistance e.g. aluminium and magnesium alloys, in mechanical engineering, in automobile, electro and medical technology and in aviation and aerospace. Thread repair of damaged or worn threads. Reject recovery.

1652

Set contents

Order No. 0050 0075 0100

M5–M12 M6–M10

152.00

90.60

M6–M12 + M14 x 1.25

175.50 (W161)

Thread inserts

Design: Standard thread insert, free running made of stainless steel. 1.5 x D.

Design: Standard thread insert, free running made of stainless steel. 1.0 x D.

1652

1652

Size

Size

Order No. 0160 0180 0200 0210 0220 0230 0240 0250 0260

PU

Order No. 0590 0595 0600 0605 0214 0610 0245 0615 0620 0622 0623 0624

PU

M2

65.50 m 19.50 m

M3 M4 M5 M6

15.65 15.65 13.60 14.60

100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆

100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆

M2.5

M3 M4 M5 M6 M8

14.60 14.60 16.75 17.75 18.80 24.00 35.50 (W161)

MF8 x 1.0

29.30 m

M8

18.80

MF10 x 1.0

34.80 m

M10 M12

M10 M12

26.10 40.70

MF14 x 1.25

57.50 m 76.60 m 94.70 m

M14 M16

(W161)

Design: Standard thread insert, free running made of stainless steel. 2.0 x D.

Design: Standard thread insert, free running made of stainless steel for spark plug thread.

1653

1653

Size

Size

Order No. 0840 1240 1640

PU

Order No. 0300 0310 0320 0330 0340 0350 0360

PU

Length of thread mm

M3 M4 M5 M6 M8

16.75 16.75 18.80 22.00 26.10 30.30 46.00 (W161)

MF14 x 1.25 MF14 x 1.25 MF14 x 1.25

28.70 28.70 28.70

100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆ 100 ∆

50 ∆ 50 ∆ 50 ∆

8.4 12.4 16.4

(W161) ∆ Can only be supplied as a whole packaging unit.

M10 M12

1/182