Catalog FORMAT Plus- 2017 - 2018

Milling Cutters 310

Solid Carbide 3 Flute Slot Drills

Design: Solid carbide (K10/K20), type N, DIN 6527, 30°, TiAIN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for milling keyways and feather key grooves as well as for universal machining. For milling depths up to max. 1.5 x D. Feed is approx. 50% higher than with a 2-edged cutter.

Type N

Z 3

DIN 6527

Solid carbide

DIN 6535-HB

30°

Cutting Tools 2

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2348

100

100

40

120

300

80

6WHHOV XSWR

2348

∅ d 1

h10

Order No.

Cutting length l 2

Overall length l 1

Shank ∅ d 2

h6

1PP

f z mm

mm

mm

mm

mm

TiAlN

0200 0300 0400 0500 0600 0800 1000 1200 1400 1600 1800 2000

2 3 4 5 6 8

19.80 19.80 18.85 18.85 18.45 24.70 36.00 51.30 66.60 83.70

6 7 8

57 57 57 57 57 63 72 83 83 92 92

6 6 6 6 6 8

0.005 0.010 0.020 0.020 0.024 0.032 0.038 0.046 0.054 0.054 0.066 0.066

10 10 16 19 22 22 26 26 32

10 12 14 16 18 20

10 12 14 16 18 20

124.00 131.00 (W212)

104

Solid Carbide 3 Flute Slot Drill Set

Design: Solid carbide (K10/K20), type N, DIN 6527, 30°, TiAIN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for milling keyways and feather key grooves as well as for universal machining. For milling depths up to max. 1.5 x D. Feed is approx. 50% higher than with a 2-edged cutter.

TiAlN

2348

Set content ∅

Order No.

mm

TiAlN

0010

4; 5; 6; 8; 10; 12 (order no. 2348)

156.50 (W212)

2/56