Catalog FORMAT Plus- 2017 - 2018

Milling Cutters 313

Solid Carbide Vari-Helix 3 Flute Slot Drill

Design: Ultra-fine grit solid carbide, type NH, DIN 6527, 41°/43°/45°, fire-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling as well as for universal machining. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 41°/43°/45° results in particularly smooth running and thus extremely good workpiece surface quality for finishing milling operations. In addition, feeds higher by up to 60% can be realized for slot cutting and rough milling. A much longer tool life is achieved than with conventional tools. The 3-edged cutter has a larger gullet and can thus also be used for very large cutting depths.

Typ NH

Z 3

DIN 6527

Solid carbide

DIN 6535-HB

41°/43°/45°

Cutting Tools 2

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2371

200

170

140

110

100

80

200

250

150

70

6WHHOV XSWR

6WHHOV XSWR

2371

2371

∅ d 1 e8 mm

∅ d 1 e8 mm

Order No.

Cutting length l 2 mm

Order No.

Cutting length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

1PP

1PP

f z mm

f z mm

Fire

Fire

0300 0350 0370 0400 0450 0470 0500 0550 0570 0600 0650

3.0 30.10 3.5 33.00 3.7 34.20 4.0 30.10 4.5 33.00 4.7 34.20 5.0 30.10 5.5 33.00 5.7 34.20 6.0 37.40 6.5 41.10

8

57 2.7 21 6 0.019 57 3.2 21 6 0.019 57 3.4 21 6 0.019 57 3.7 21 6 0.028 57 4.2 21 6 0.028 57 4.4 21 6 0.028 57 4.7 21 6 0.028 57 5.2 21 6 0.028 57 5.4 21 6 0.028 57 5.5 21 6 0.039 63 6.0 27 8 0.039

0700 0750 0800 0850 0900 0950

7.0 44.50 7.5 48.60 8.0 51.00 8.5 56.00 9.0 63.40 9.5 70.00

16 19 19 19 19 22 22 26 32 38

63 6.5 27 8 0.039 63 7.0 27 8 0.039 63 7.5 27 8 0.053 72 8.0 32 10 0.053 72 8.5 32 10 0.053 72 9.0 32 10 0.053 72 9.2 32 10 0.065 83 11.2 38 12 0.079 92 15.0 44 16 0.095 104 19.0 54 20 0.110

10 11 11 11 13 13 13 13 13 16

1000 10.0 75.80 1200 12.0 98.00 1600 16.0 168.00 2000 20.0 255.00

(W221)

(W221)

Solid Carbide Hi-Helix End Mills

Design: Ultra-fine grit solid carbide, type H, according to factory standard, 50°, TiAlN-coated, with centre cut. Application: For slot cutting and for universal machining. Also suitable for trimming and finishing milling. Feed is approx. 50% higher than with a 2-edged cutter. The extremely high spiral lead results in particularly smooth running and thus low deviation in shape and a very good surface on the workpiece. Particularly suitable for VA machining .

Type INOX

Z 3–4

Solid carbide

Factory standard

DIN 6535-HB

50°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2365

107

107

66

66

54

54

2365

2365

∅ d 1 h10 mm

∅ d 1 h10 mm

Order No.

Cutting length l 2 mm

Order No.

Cutting length l 2 mm

Overall length l 1 mm

Shank ∅ d 2 h6 mm

Number of teeth f z

Overall length l 1 mm

Shank ∅ d 2 h6 mm

Number of teeth f z

mm

mm

TiAlN

TiAlN

0600 0800 1000 1200

6 34.40 8 44.10 10 65.20 12 89.50

13 19 22 25

50 60 70 75

6 8

3 0.019 3 0.025 3 0.027 3 0.028

1600 1800 2000 2500

16 148.50 18 217.00 20 246.00 25 394.00

32 90 16 32 90 18 38 100 20 45 120 25

3 0.031 3 0.030 4 0.020 4 0.022

10 12

(W212)

(W212)

2/59

Articles marked ◊ are not held in stock, procurement is effected at short notice.