Catalog FORMAT Plus- 2017 - 2018

Milling tools 330

Solid Carbide Multi-Flute End Mill for Hard Machining

Design: Ultra-fine grid solid carbide (K50), type H, DIN 6527, 55°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high-precision finishing. The extremely high spiral lead and reinforced core results in particularly smooth running and thus low deviation in shape

Type H

Z 6–8

DIN 6527

Solid carbide

DIN 6535-HA

HSC

55°

and a very good surface on the workpiece. Suitable for HSC machining up to 56 HRC.

Cutting Tools 2

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2385

180

120

80

55

45

200

6WHHOV XSWR +5F f z mm

2385

∅ d 1

h10

Order No.

Cutting length l 2

Overall length l 1

Shank ∅ d 2

h6

Number of teeth

mm

mm

mm

mm

Signum

0300 0400 0500 0600 0800 1000 1200 1600 2000

3 4 5 6 8

47.00 43.60 42.00 42.00 47.80 83.10

8

57 57 57 57 63 72 83 92

6 6 6 6 8

6 6 6 6 6 6 6 6 8

0.003 0.009 0.009 0.011 0.016 0.021 0.026 0.032 0.038

11 13 13 19 22 26 32 38

10 12 16 20

10 12 16 20

113.00 199.00 285.00 (W221)

104

Solid Carbide Long Series Multi-Flute End Mill for Hard Machining

Design: Ultra-fine grit solid carbide (K50), type H, according to factory standard, 55°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling, trimming and high-precision finishing. For milling depths up to 3 x D. Ideal for use in mould-making. The extremely high spiral lead and reinforced core results in particularly smooth running and thus low deviation in shape

Type H

Z 6–8

Solid carbide

Factory standard

DIN 6535-HA

HSC

55°

and a very good surface on the workpiece. Suitable for HSC machining up to 56 HRC.

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2386

180

120

80

55

45

200

6WHHOV XSWR +5F f z mm

2386

∅ d 1

h10

Order No.

Cutting length l 2

Overall length l 1

Shank ∅ d 2

h6

Number of teeth

mm

mm

mm 75 100 100 150 150 150

mm

Signum

0600 0800 1000 1200 1600 2000

6 8

50.20 57.60 97.10

30 40 40 45 65 65

6 8

6 6 6 6 6 8

0.011 0.016 0.021 0.026 0.032 0.038

10 12 16 20

10 12 16 20

136.00 248.50 365.50 (W221)

2/76