Catalog FORMAT Plus- 2017 - 2018

Milling Cutters 341

Continued Solid Carbide Mini 2 Flute Necked Ball Nose Slot Drills for Hard Machining

6WHHOV XSWR +5F f z mm

2403

∅ d 1

Order No.

Radius r

Cutting length l 2 mm

Clear area l 3

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3

mm

mm

mm

mm

TiAlN

2012 2014 2016 2020 2030 3008 3010 3012 3016 3020 3025 3030 3035 4010 4012 4016 4020 4025 4030 4050 5016 5025 6020 6030 6040 6050

2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.0 6.0 6.0 6.0

26.80 28.60 28.60 30.60 35.10 33.00 33.00 33.00 39.80 42.70 42.70 46.10 50.70 33.00 33.00 39.80 42.70 42.70 46.10 60.90 39.80 42.70 42.70 46.10 50.70 60.90 (W212)

1.00 1.00 1.00 1.00 1.00 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.50 2.50 3.00 3.00 3.00 3.00

3.0 3.0 3.0 3.0 3.0 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6.0 6.0 6.0 6.0 6.0 6.0 6.0 7.5 7.5 9.0 9.0 9.0 9.0

50 50 50 55 70 50 50 50 55 60 65 70 80 60 60 60 65 70 70 60 70 80 90

1.95 1.95 1.95 1.95 1.95 2.85 2.85 2.85 2.85 2.85 2.85 2.85 2.85 3.85 3.85 3.85 3.85 3.85 3.85 3.85 4.85 4.85 5.85 5.85 5.85 5.85

12 14 16 20 30 10 12 16 20 25 30 35 10 12 16 20 25 30 50 16 25 20 30 40 50 8

4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

0.006 0.006 0.006 0.006 0.006 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.013 0.013 0.013 0.013 0.013 0.013 0.013 0.016 0.016 0.019 0.019 0.019 0.019

Cutting Tools 2

100

100 110

Solid Carbide 2 Flute Ball Nose Slot Drills for Hard Machining

Design: Ultra-fine grit solid carbide, type N, according to factory standard, 30°, TiAlN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible.

Type N

Z 2

Solid carbide

Factory standard

DIN 6535-HA

HSC

Application: Can be used for copy milling. Suitable for HSC machining up to 62 HRC.

30°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2414

150

88

66

66

66

66

150

66

6WHHOV XSWR +5F f z mm

6WHHOV XSWR +5F f z mm

2414

2414

∅ d 1 e8 mm

∅ d 1 e8 mm

Order No.

Radius r ± 0.02 mm

Cutting length l 2 mm

Order No.

Radius r ± 0.02 mm

Cutting length l 2 mm

Overall length l 1 mm

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Shank ∅ d 2 h6 mm

TiAlN

TiAlN

0100 0150 0200 0250 0300 0400 0500 0600

1.0 29.10 1.5 29.10 2.0 26.40 2.5 26.40 3.0 26.40 4.0 27.60 5.0 28.50 6.0 30.90

0.50 2.5 0.75 4.0 1.00 5.0 1.25 6.0 1.50 8.0 2.00 8.0 2.50 10.0 3.00 12.0

50 50 50 60 60 70 80 90

6 0.002 6 0.004 6 0.007 6 0.009 6 0.011 6 0.017 6 0.021 6 0.027

0800 1000 1200 1400 1600 1800 2000

8.0 48.30 10.0 77.10 12.0 98.20 14.0 163.50 16.0 163.50 18.0 178.00 20.0 255.00

4.00 14.0 100 8 0.042 5.00 18.0 100 10 0.054 6.00 22.0 110 12 0.070 7.00 26.0 110 16 0.082 8.00 30.0 140 16 0.093 9.00 34.0 140 18 0.107 10.00 38.0 160 20 0.119

(W212)

(W212)

2/87

Articles marked ◊ are not held in stock, procurement is effected at short notice.