Catalog FORMAT Plus- 2017 - 2018

Milling tools 345

Solid Carbide Long Series 2 Flute Necked Ball Nose Slot Drills for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to factory standard, 30°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould- making applications. The tool life increases with minimal amount lubrication or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for HSC machining up to 62 HRC . Note: Copy milling, cutting values preferred at ap = 0.05 x d 1 and ae = 0.1 x d 1 .

Type H

Z 2

Solid carbide

Factory standard

DIN 6535-HA

HSC

30°

Cutting Tools 2

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2426

200

150

130

100

80

+DUG PDFKLQLQJ RYHU +5F f z mm

2426

∅ d 1

h8

Order No.

Radius r ± 0.015 mm

Cutting length l 2 mm

Neck ∅ d 3

Clear area l 3

Shank ∅ d 2 h6 mm

Overall length l 1

mm

mm

mm

mm 39 39 39 39 64 60 105 102

Signum

0300 0400 0500 0600 0800 1000 1200 1600

3 4 5 6 8

63.40 70.00 74.10 77.40 95.50

1.5 2.0 2.5 3.0 4.0 5.0 6.0 8.0

5 6 8 9

75 75 75 75

2.7 3.7 4.7 5.7 7.7 9.5

6 6 6 6 8

0.030 0.035 0.038 0.040 0.050 0.070 0.080 0.100

12 15 18 24

100 100 150 150

10 12 16

122.50 184.50 275.00 (W221)

10 12 16

11.5 15.5

Solid Carbide 2 Flute Slot Drill with Corner Radius

Design: Ultra-fine grit solid carbide, type N, DIN 6527, 30°, fire-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. These tools should only be used in shrink or hydro-.expansion chucks. Application: Can be used for copy milling and slot cutting as well as for universal machining with corner radius to avoid notching effects on the workpiece – less corner wear during slot cutting. Suitable for HSC machining. .

Type N

Z 2

DIN 6527

Solid carbide

DIN 6535-HA

HSC

30°

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2491

130

130

120

80

80

40

120

30

300

130

6WHHOV XSWR

6WHHOV XSWR

2491

2491

∅ d 1 h10

∅ d 1 h10

Order No.

Corner radius r mm

Cutting length l 2 mm

Order No.

Corner radius r mm

Cutting length l 2 mm

Clear area l 3 mm

Clear area l 3 mm

Overall length l 1 mm

Neck ∅ d 3

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3

Shank ∅ d 2 h6 mm

1PP

1PP

f z

f z

Fire

Fire

mm

mm

mm

mm

mm

mm

0605 0610 0805 0810 0815 0820 1005 1010 1015 1020

6 20.20 6 20.20 8 27.20 8 27.20 8 27.20 8 27.20 10 40.70 10 40.70 10 40.70 10 40.70

0.5 10 57 5.7 21 6 0.024 1.0 10 57 5.7 21 6 0.024 0.5 16 63 7.7 27 8 0.032 1.0 16 63 7.7 27 8 0.032 1.5 16 63 7.7 27 8 0.032 2.0 16 63 7.7 27 8 0.032 0.5 19 72 9.5 32 10 0.038 1.0 19 72 9.5 32 10 0.038 1.5 19 72 9.5 32 10 0.038 2.0 19 72 9.5 32 10 0.038

1205 1210 1215 1220 1610 1620 2010 2015 2020

12 59.30 12 59.30 12 59.30 12 59.30 16 95.50 16 95.50 20 146.50 20 146.50 20 146.50

0.5 22 83 11.5 38 12 0.046 1.0 22 83 11.5 38 12 0.046 1.5 22 83 11.5 38 12 0.046 2.0 22 83 11.5 38 12 0.046 1.0 26 92 15.5 44 16 0.054 2.0 26 92 15.5 44 16 0.054 1.0 32 104 19.5 54 20 0.066 1.5 32 104 19.5 54 20 0.066 2.0 32 104 19.5 54 20 0.066

(W221)

(W221)

2/91

Articles marked ◊ are not held in stock, procurement is effected at short notice.