Catalog FORMAT Plus- 2017 - 2018

Slitting Saw Blades 355

Design: material no. 1.3243 HSS-E DMo5, bright, hardened and repeatedly annealed to 65-66 HRC. With collar, without pin holes Tooth shape: BW Application: Can be used with portable GF pipe saws.. For cutting construction steels, non-alloyed tool steel, chrome steel and stainless steel, pipes made of high-alloyed steels (stainless steel). The saw blades can be re-sharpened several times. HSSe Metal Slitting Saw Blade for GF Saws

HSS-E DMo5

bright

Cutting Tools 2

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2654

C

C

2654

∅ x width x bore

Order No.

For wall thicknesses

Number of teeth BW

Tooth pitch T

mm

mm

mm 4.5 3.1 4.9 3.3 2.6 3.9 3.1

bright

0001 0004 0007 0010 0013 0016 0019

63 x 1.6 x 16 63 x 1.6 x 16 68 x 1.6 x 16 68 x 1.6 x 16 68 x 1.6 x 16 80 x 1.8 x 16 80 x 1.8 x 16

36.20 36.20 36.20 38.90 38.90 48.90 48.90 (W242)

2.5–5.5 1.2–2.5 2.5–7.0 1.5–4.0 1.0–2.5 from 2.5 1.2–2.5

44 64 44 64 84 64 80

HSS Metal Slitting Saw Blade

Design: Precision of keyway cutting in accordance with DIN 1840, hollow-ground. HSS-DMo5, bright, hardened and repeatedly annealed to 63–65 HRC – with or without collar according to manufacturer's specifications – high-precision ground. Without pin holes.

HSS DMo5

DIN 1837

DIN 1838

2655

DIN 1837 A – herringbone tooth, fine tooth pitch. Application: For thin-walled materials and shallow cutting depths. For machining short-chipping materials. DIN 1838 B – curved tooth, coarse tooth pitch. Application: For thick-walled materials and larger cutting depths. DIN 1838 C – curved tooth with roughing and finishing teeth, coarse tooth pitch Application: High stock removal capacity possible thanks to chip breaking. For thick-walled materials and medium to large cutting depths.

blank

2656

blank

2657

blank

Tooth shape: Curved tooth C bright

Tooth shape: Herringbone tooth A bright

Tooth shape: Curved tooth B bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2655 2656 2657

C C C

2655

2656

2657

∅ j15

Order No.

Width j11

Bore H7

Number of teeth shape A

Number of teeth shape B

Number of teeth shape C

bright Shape A

bright Shape B

bright Shape C

mm

mm

mm

0001 0004 0007 0010 0013 0016 0019 0022 0025 0028 0031

20 20 20 20 20 20 20 20 20 20 20

13.50 13.50 12.30 12.30 11.60 11.60 11.60 11.60 13.10 14.40 14.80 (W240)

– – – – – – – – – – –

– – – – – – – – – – –

0.20 0.25 0.30 0.40 0.50 0.60 0.80 1.00 1.20 1.60 2.00

5 5 5 5 5 5 5 5 5 5 5

80 64 64 64 48 48 48 40 40 40 32

– – – – – – – – – – –

– – – – – – – – – – –

Carbide available on request.

Continued overleaf

(W240)

(W240)

2/101

Articles marked ◊ are not held in stock, procurement is effected at short notice.