Catalog FORMAT Plus- 2017 - 2018

Tool bits/engraving bright 389

Tool bit, form L 1, dual trapezoidal

Design: HSS Co10, according to factory standard, hardened, annealed, true to size and dressed to size. The ends are straight and non-machined. ± 2 mm Cross-section: h12/h12 Application: Due to respective grinding, also suitable as a parting tool for parting and grooving in tool- and mould-making. Hardness approx. 63–68 HRC. Tolerance for form L1: length:

HSS Co10

Factory standard

Cutting Tools 2

2786

2786

2786

h x b

h x b

h x b

Order No.

Total length mm

Order No.

Total length mm

Order No.

Total length mm

mm

mm

mm

0001 0004 0007 0010 0013

12 x 3 12 x 3 12 x 3 12 x 5 12 x 5

14.60 19.90 26.60 27.50 36.50 (W266)

85 120 160 120 160

0016 0019 0022 0025 0028

16 x 4 16 x 4 16 x 4 18 x 4 18 x 4

26.40 35.00 43.70 38.10 47.00 (W266)

0031 0034 0037 0040

20 x 3 20 x 3 25 x 6 25 x 6

26.70 37.30 57.50 71.30 (W266)

120 160 200 160 200

140 200 160 200

Tool bit form E, trapezoidal

Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are straight and non-machined. Hardness approx. 63–68 HRC. Tolerance for form E: length: ± 2 mm Cross-section: h12/h12 Application: Due to respective grinding, also suitable as a parting tool for parting and grooving in tool- and mould-making.

HSS Co10

DIN 4964

2788

2788

2788

h x b

h x b

h x b

Order No.

Total length mm

Order No.

Total length mm

Order No.

Total length mm

mm

mm

mm

0001 0004 0007

12 x 3 12 x 3 12 x 3

6.65 8.40

80 100 125

0019 0022

20 x 5 25 x 6

34.00 71.30 (W266)

0010 0013 0016

16 x 4 16 x 4 16 x 4

14.60 24.30 29.20 (W266)

160 200

100 160 200

10.55 (W266)

Engraving bright form A, round

Design: HSS Co10, according to factory standard, hardened, annealed, true to size and dressed to size. Pre-profiled on one side (bisection with 0.1 mm measurement), with straight cutting edge (length of cutting edge 1.5 x D). One end not machined. Hardness approx. 63–68 HRC. Tolerance for form A: length: ± 2 mm ∅: h8 Application: Due to respective grinding, also suitable for engraving lettering and contours as well as for contour turning and copy milling in dip working and mould-making. The pre-profiled bisection is quickly adapted to the required purpose of application by finish-grinding.

HSS Co10

Factory standard

2790

2790

2790

∅ h8

∅ h8

∅ h8

Order No.

Cutting edge length mm

Total length mm

Order No.

Cutting edge length mm

Total length mm

Order No.

Cutting edge length mm

Total length mm

mm

mm 6.0

mm

0001 0004 0007 0010 0013 0016

2.0 5.70 2.5 6.00 3.0 5.35 4.0 5.35 4.0 6.50 5.0 8.25

3.5 40 3.7 40 4.5 63 6.0 63 6.0 100 7.5 80

0019 0022 0025 0028 0031 0034

9.40

0037 0040 0043 0046 0049

12.0 22.80 12.0 32.70 16.0 53.50 20.0 84.20 20.0 105.50

9.0 80 9.0 100 12.0 90 12.0 125 15.0 100 15.0 125

18.0 125 18.0 160 24.0 160 30.0 160 30.0 200

6.0 10.35 8.0 11.35 8.0 14.60 10.0 14.25 10.0 16.20

(W266)

(W266)

(W266)

2/135

Articles marked ◊ are not held in stock, procurement is effected at short notice.