Catalog FORMAT Plus- 2017 - 2018
Driving pin chuck 549
m
Revolving tailstock centre - PRO
Design: Body hardened and ground, with tip angle 60°. Triple bearing for high axial and radial strength. Sealed for life. With jacknut. Application: For counter-clamping on rotary and grinding machines.
*
%
'
0
.
$
0020
0030
0040
0050
0060
Order No.
Morse taper
2
3
4
5
6
3308
351.00
395.00
429.00
706.00 ◊
1102.00 ◊
Size
102
106 79.5
108
110 129
114 152 105
Dimension A Dimension B Dimension D Dimension G Dimension K Dimension M
mm mm mm
65 45 20
102.5
60 25
70 32
90 40
50
mm 17.78
23.825
31.267
44.399
63.348
mm mm
24 56
30.5
40 82
49.5 105
57
74
120 0.01 1800 2600
Systems
Clamping
Max. concentricity
mm 0.005
0.005
0.005
0.005 1000 3000
Max. workpiece weight
kg
120
360
500
3
Speed max.
min -1
7000
5000
3800
(W309)
Design: Body and tip drop forged, hardened and ground. Moving point is regrindable for several times and shank-mounted, with low 60° VL tip angle deflection. The precision bearing is protected from dirt and coolant by the special lip seal. The shank is ground, with hole for easy dismantling. Clamping force can be directly read in daN from the manometer. Pressure equalisation is done via disc springs. Application: Particularly suitable as tail centre to face drivers, to determine and maintain the clamping force as well as to clamp long, slim workpieces to prevent deflections. Order No. 0005 Revolving tailstock centre - AC-VL CONTROL extended K 0010
A
0015
0020
Morse taper
3
4
5
6
3312
801.00
967.00
1262.00
2215.00
Size
503 120
504
505
506 223 120
Dimension A Dimension B Dimension D Dimension G Dimension K Dimension J
mm mm mm mm mm mm mm daN
137.5
177.5
64 25
72 32
95 40
52
23.825
31.267
44.399
63.348
46.5
53 14
66 15
80 24
11
Max. concentricity
0.01 550 260 4000
0.01 900 550 3500
0.01 1500 1100 2500
0.015 2000 2500 1800
Max. axial clamping force Max. workpiece weight
kg
Speed max.
min -1
(W309)
Revolving tailstock centres with interchangeable inserts - FLEX
Design: Fully hardened and ground. Supplied in wooden case. Application: Versatile by simple and fast replacement of the centring inserts using the lifter. Scope of delivery: Revolving lathe centre with 3 inserts (60°, 90° and 60° VL), 1 hollow body 60°, 2 hollow bodies for non-centred workpieces (Form A and B) and 1 lifter. Note: Individual inserts and hollow bodies upon request.
E
G
B
D
A
0005
0010
0015
0020
0025
Order No.
Morse taper
2
3
3
4
5
3315
491.00
558.00
630.00
737.00
974.00
Size
102
104
106
108
110
Dimension A Dimension B Dimension D Dimension E
mm mm mm mm mm
45 43 20
48
55
67
85
48.5
58.5
68.5
88.5
22
25
32
40
4
4
5.5
5
6
Max. concentricity
0.01
0.01 130
0.01 150
0.01 250
0.01 650
Max. workpiece weight
kg
40
(W309)
3/27
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Made with FlippingBook flipbook maker