Catalog FORMAT Plus- 2017 - 2018

Driving pin chuck 551

Cartridge mandrel range of products

Application: For axial and radial runout control. Turning, grinding, etc. Mounting between centres. Supplied in wooden case.

3350

Size

Order No. 0005

Clamping range mm

Set contents

1

1422.00 ◊

12–26 5 clamping mandrels size 02–06 7 clamping sleeves 12; 14; 16; 18; 20; 22; 24 mm 25–55 3 clamping mandrels size 07–09

0010

2

1572.00 ◊

6 clamping sleeves 25; 30; 35; 40; 45; 50 mm

(W001)

Systems

Clamping

Constant face driver range of products CoA

3

Design: CoA small range of products, clamping diameter 12–50 mm, turning range 13–100 mm, hydraulic. Supplied in wooden case. Application: For efficient turning of workpieces over their entire length in one setup with high accuracy. Designed based on the modular principle, therefore universal exchange of driving

plates and centring points possible. Hydraulic or mechanic pressure equalisation results in uniform clamping force also in case of uneven workpiece faces. Workpiece face longitudinal stop by spring-loaded centring point. Scope of delivery: Constant face driver range of products with 1 base body, 4 driving cutters, clamping diameters 12 – 20 – 32 – 50 mm and 2 centring points, diameter A = 6 + 12 mm.

3340

MK

Order No. 0005 0010 0015 0020 0025 0030 0035 0040

Running direction

3 3 4 4 5 5 6 6

927.00

Right

927.00 ◊

Left

949.00

Right

949.00 ◊ 1004.00 ◊ 1004.00 ◊ 1148.00 ◊ 1148.00 ◊

Left

Right

Left

Right

Left

(W311)

Constant face driver range of products CoE

Design: CoE range of products, clamping diameter 12–50 mm, turning range 13–100 mm. Supplied in wooden case. Application: Ideally suitable for efficient turning of workpieces over their entire length in one setup with high accuracy. At the same time, a groove or serration can be milled. This can e.g. save changeover to a vice which translates into savings in time and costs. Designed based on the modular principle, therefore universal exchange of driving plates and centring points possible. Mechanic pressure equalisation results in uniform clamping force also in case of uneven workpiece faces. Workpiece face longitudinal stop by spring-loaded centring point.

Scope of delivery: Constant face driver range of products with 1 base body, 4 driving plates, clamping diameters 12 – 20, 32 and 50 mm as well as 3 centring points, diameter 12, 20 and 32-50 mm.

3341

MK

Order No. 0005 0010 0015

Running direction

3 4 5

1082.00 ◊ 1112.00 ◊ 1164.00 ◊

Right or left Right or left Right or left

(W311)

3/29

Articles marked ◊ are not held in stock, procurement is effected at short notice.