Catalog FORMAT Plus- 2017 - 2018

Tool holders 569

Precision diameter head mount with front-side cooling channel holes

Design: DIN 69871, Form AD/B, precision balanced. Made of alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. All functional surfaces machined and guaranteed quality thanks to double 100 % control. With coolant outlet holes on the end face for milling cutters and internal cooling. Taper tolerance: AT3. Concentricity: < 0.006 mm. Balancing quality: G2.5 22000 min -1 . Hardened 60 -2 HRC. Application: To mount cutter heads and milling cutters with cross groove to DIN 1880 as well as mounting to DIN 2079 from clamping diameter 40 possible (4 additional threaded holes).

DIN 69871

Form AD/B

≤ 6 µm

Scope of delivery: Milling head mounting complete with cutter retaining screw.

Clamping d 2 mm l 2 mm l 1 mm 0001 16 90.00 40 32 17 35 0002 16 106.00 40 36 17 100 0004 22 90.00 40 48 19 35 0007 22 107.00 40 48 19 100 0010 27 90.00 40 48 21 35 0013 27 113.00 40 60 21 100 0016 32 104.00 40 78 24 50 0019 32 143.00 40 78 24 100 0022 40 123.00 40 87 27 50 (W394) Order No. d 1 mm 3220 SK d 2 mm l 2 mm l 1 mm 0028 22 131.00 * 50 48 19 35 0029 22 154.00 * 50 48 19 100 0031 27 135.00 * 50 60 21 35 0032 27 161.00 * 50 60 21 100 0034 32 139.00 50 78 24 35 0035 32 184.00 50 78 24 100 0037 40 156.00 50 89 27 50 0038 40 184.00 50 89 27 100 (W394) * Also suitable for ANSI CAT. Systems 3 Order No. d 1 mm 3220 SK

Combi shell end mill arbour

Design: DIN 69871, Form AD, made of alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper according to DIN 254. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Bore tolerance: H5. Balancing quality: G6.3 15000 min -1 . Concentricity: < 0.01 mm. Hardened 58 ±2 HRC. Application: To nest milling cutters with cross groove, DIN 1880.

DIN 69871

Form AD

≤ 10 µm

Scope of delivery: Combi shell end mill arbour with cutter retaining screw.

Order No. SK l 1 mm l 2 mm l 3 mm d 2 mm 4160 16 45.40 40 55 17 27 32 4165 16 57.70 40 100 17 27 32 4220 22 46.40 40 55 19 31 40 4225 20 58.80 40 100 19 31 40 4270 27 46.40 40 55 21 33 48 4275 27 59.90 40 100 21 33 48 4320 32 51.80 40 60 24 38 58 4325 32 63.10 40 100 24 38 58 4400 40 59.00 40 60 27 41 70 4405 40 69.50 40 100 27 41 70 (W370) Order No. d 1 mm 3606 SK l 1 mm l 2 mm l 3 mm d 2 mm 5160 16 63.20 50 55 17 27 32 5220 22 63.20 50 55 19 31 40 5270 27 65.30 50 55 21 33 48 5320 32 67.40 50 55 24 38 58 5400 40 73.70 50 55 27 41 70 (W370) d 1 mm 3606

m

Combi shell end mill arbour Design: DIN 69871, Form AD, made of alloy case-hardened steel. All functional surfaces machined and guaranteed quality thanks to double 100 % control. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Balancing quality: G6.3 8000 min -1 . Concentricity: < 0.003 mm. Hardened 60 -2 HRC. Application: To mount cutter heads and milling cutters with cross groove.

DIN 69871

Form AD

≤ 6 µm

Scope of delivery: Milling head mounting complete with cutter retaining screw.

A

L

3704

D1

D2

∅ D1 mm

Order No. 0025 0030 0035

SK

∅ D2 mm

L mm

A mm

16 22 27

61.00 61.00 61.00 (W394)

40 40 40

36 48 48

17 19 21

35 35 35

3/47

Articles marked ◊ are not held in stock, procurement is effected at short notice.