Catalog FORMAT Plus- 2017 - 2018

Tool holders 605

Design: HSK 63, DIN 69893, Form A, with internal cooling. Material with tensile strength of 1600–1800 N/mm 2 and hardness of 52 ±2 HRC. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure forces developed effects even deformation by which the tool shank is being clamped with high concentricity (max. 3 µm). Taper to DIN 254. Hole for data carrier/chip (Ballauf). Taper angle: Tolerance AT3. Maximum speed: 40000 min -1 . Optimal operating temperature: 20–50 °C. Coolant pressure max: 80 bar. Adjustment track: 10 mm. Balancing quality: G2.5 25000 min -1 . Scope of delivery: Hydro expansion clamping chuck with hexagonal T-key. Precision hydro expansion clamping chuck - short, slim DIN 69893 d 3 d 2 d 1

Form A

≤ 3 µm

l 2

l 3

G

l 4

l 1

3547

Clamping d 3 mm l 1 mm l 2 mm l 3 mm l 4 mm G Spanner width mm 0002 6 397.50 63 26 50 70 37 10 24 M5 2.5 0005 6 781.00 ◊ 63 28 50 150 37 10 110 M5 2.5 0008 8 397.50 63 28 50 70 37 10 24 M6 3 0011 8 781.00 ◊ 63 28 50 150 37 10 110 M6 3 0014 10 397.50 63 30 50 80 41 10 32 M6 3 0017 10 781.00 ◊ 63 30 50 150 41 10 110 M6 3 0020 12 364.50 63 32 50 85 46 10 40 M10 5 0023 12 781.00 ◊ 63 32 50 150 46 10 110 M10 5 0026 14 397.50 ◊ 63 34 50 85 46 10 40 M10 5 0029 14 781.00 ◊ 63 34 50 150 46 10 110 M10 5 0032 16 397.50 63 38 50 90 49 10 45 M10 5 0035 16 781.00 ◊ 63 38 50 150 49 10 110 M10 5 0038 18 397.50 63 40 50 90 49 10 46 M10 5 0041 18 781.00 ◊ 63 40 50 150 49 10 110 M10 5 0044 20 364.50 63 42 50 90 51 10 48 M10 5 0047 20 781.00 ◊ 63 42 50 150 51 10 110 M10 5 0050 25 397.50 63 57 53 120 57 10 63 M10 5 (W326) Systems 3 Order No. d 1 mm HSK d 2 mm

Design: DIN 69893, Form A, with internal cooling. Material with tensile strength of 1600–1800 N/mm 2 and hardness of 52 ±2 HRC. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure forces developed effects even deformation by which the tool shank is being clamped with high concentricity (max. 3 µm). Taper to DIN 254. Hole for data carrier/chip (Ballauf). Taper angle: Tolerance AT3. Maximum speed: 40000 min -1 . Optimal operating temperature: 20–50 °C. Coolant pressure max: 80 bar. Adjustment track: 10 mm. Balancing quality: G2.5 25000 min -1 . Scope of delivery: Hydro expansion clamping chuck with hexagonal T-key. Precision hydro expansion clamping chuck - short, heavy DIN 69893 d 2 d 1

Form A

≤ 3 µm

l 2

l 3

G

l 1

3547

Order No. d 3 mm l 1 mm l 2 mm l 3 mm l 4 mm G Spanner width mm 0100 20 238.00 63 20 57 80 51 10 35 M8 x 1 5 (W326) d 1 mm HSK d 2 mm

3/83

Articles marked ◊ are not held in stock, procurement is effected at short notice.