Catalog FORMAT plus 2017 - 2018

3

ALL FORMATplus

TOP

STRONG PARTNER ImpressIve choIce

Quality, experience and service. An unbeatable combi- nation. As always. see for yourself: on the following pages you will find top quality products for industry and trade. And that's what makes FormATplus stand out.

TOP

our strength is your advantage. And we are:

1 CUSTOMER-DRIVEN Take advantage of our years of experience. 2 REASONABLY PRICED We calculate the best price for you. Always.

5 EXCLUSIVE

only from us: FormAT tools of the highest quality. That's a promise.

6 VERSATILE

peace of mind: more than 36,000 items permanently in stock.

3 GUARANTEED

7 COMPETENT

We guarantee the quality of our tools. every day.

Do you need advice on managing your materials? We can help. every time.

4 EFFICIENT

8 FLEXIBLE

48 to 72 hour delivery service depending on cost and location.

special tools needed? We're happy to get them for you.

www. format-quality .com

I

4

NATIoNWIDe COMPETENCE

PREMIUM TRADE TOOLS ALWAYs cLose BY

No boundaries: United Kingdom and across europe, we have been known for many years as a system supplier and tool specialists. We keep moving and share our success with our partners. In industry, trade, and in various institutions our customers have a wide range of benefits that only a strong and broad-based coalition of leading dealers can offer; long-term.

Your benefits: • Fair prices • Highest delivery standards • Perfect service • Proper warehousing proximity to our customers is how we work: our electronic Logistics centre (eLc) offers shor- ter therefore faster routes – from ordering to delivery of goods.

You save time. You save money.

II

5

By your side throughout europe.

III

6

servIce BY THE SHORTEST ROUTE

POWERFUL CENTRALISED LOGISTICS 24-hoUr servIce; UNITeD KINGDom coverAGe – 72-hoUr servIce; eUrope coverAGe

how can we optimise logistics and provide even better customer service long-term? FormATplus has the answer. Together with our partners and based on decades of experience we have continuously developed and extended our electronic Logistics centre (eLc). Today the eLc is accessible online and holds more than 100,000 items in stock. result: solid growth.

The advantage for our customers is obvious: after being registered the orders are immediately transferred to the warehouse system and directly processed. This enables United Kingdom delivery within 24 hours and delivery within 72 hours to the rest of europe.

To retain this high standard, all the logistics service providers in the eLc have stringent quality management controls certified according to the european standard DIN eN Iso 9001:2008.

IV

7

95 % of all catalogue items reach you within 24-72 hours.

V

8

AN ALTerNATIve WITh FORMAT

QUALITY THROUgHOUT THE RANgE The choIce speAKs For ITseLF

The wishes, expectations and requirements of our customers are our top priority: As a partner of FormATplus we therefore rely on a two brand strategy.

on the one hand our range offers the branded tools of a leading international manufacturer: every professional knows them. They have been proven through daily use and are the first choice in many companies.

on the other hand in FormAT we have the economical, high-quality alternative to the branded products: our trade name brand is made by leading manufacturers according to our strict guidelines.

Thus for more than 25 years FormAT has stood for quality, which is indispensable in industry and trade today and is underlined time and again by its continued growth.

You have the choice.

VI

9

Tried and tested quality and innovation for your company.

VII

10

processes PERFECTED

OPTIMISE YOUR MATERIALS MANAGEMENT cosTs – AND sAve TIme

companies that operate more efficiently and want to reduce cost pressures, also put the use of new resources to the test. Is internal management of materials correct? or are there gaps in purchasing, warehousing or materials output that should be closed, as a matter of priority? These questions cannot always be answered immediately. Good advice is expensive. But even with this requirement, you can use your FormATplus partner's competence. start by making an inventory to identify possible faults, to analyse processes and opti- mise procurement and logistics processes. This also clarifies the extent to which material stocks can be reduced or their throughput times minimised.

our analysis includes, among other things:

• A needs assessment of the existing processes • Improvement in the workflow of materials (purchasing and Logistics) • Cost reduction in materials management • Reduction of materials stocks • Minimisation of materials throughput times

VIII

11

Together we will optimise your running costs.

IX

12

INcreAseD EFFICIENCY

SYSTEMS FOR OPTIMAL LOGISTICS proveN TechNoLoGY For YoUr BUsINess

our "toolbox" is not limited to just transport. If required, we also provide technical systems for efficient materials management:

electronic procurement solutions specifically for industrial companies

Automatic materials delivery system with computer support

shelf system for control of materials in continual demand

Further questions? We're here to help. Give us a call.

X

13

Together we'll improve your productivity.

XI

14

ImprINT

Edition 2017/2019 Publisher as indicated on cover pages general Management (Responsible in terms of public relations):

e/D/e International AG, Annegret Franzen Editorial office, design and production: e/D/e Katalogistik october 2017

Catalogue conditions 1. This catalogue is valid from 01.10.2017 to 30.09.2019.

Following the expiration date particularly also all specified prices shall lose their valldity. This also applies in case of the publication of a subsequent catalogue. 2. This catalogue is exclusively designed for commercial purposes. 3. All specified prices are subject to change and plus statutory vAT. We have to reserve the right to charge the prices applicable at the date of delivery in the event of changes in the market place. 4. Unless otherwise stated, the price is applicable for each single product. If package units are marked with Δ , the goods can just be offered within the stated packaging unit. In case of larger purchasing quantities, an individual quote may be neessary. 5. This catalogue is protected by copyright. Any reprinting, also in excerpts, is only admissible with the explicit consent of the author. 6. Images used in the catalogue may deviate from the original product. We are not liable for possible printing errors, product changes due to technical development and changes of the model. Due to print-technical reasons, also the colours in the catalogue may deviate from the original colour of the products. 7. For the remainder, all order processing and deliveries are based on our terms of sales, service and payment.

All prices quoted in this catalogue are recommended retail prices of EDE International Ag.

XII

15

For BeTTer ORIENTATION

Item search and order placement made easy !

Three details for a secure order processing: • 8-digit article number of the required article • Quantity • For control purposes – the article description

Don't forget! Please state in every order!

Product groups: our main catalogue contains a comprehensive tool range. To simplify the product search, the catalogue is divided in 9 product groups . For a faster orientation you can find an overview with images of the content of the respective subgroup in front of every product group .

Range overview

m

Drills, circular cutters, countersinks, reamers, thread-cutters, thread-millers, chisels, drillbitsanddeburring tools

Cutting Tools 1 Cutting Tools 2 Clamping Systems 3 Measuring Equipment 4 Hand Tools 5 Hand Tools 6 Hand Tools 7 Abrasives 8 Soldering/Welding/ Ç 1/X Ç 1/X Ç 1/X Ç 1/X Ç 1/X 2 13 2 30 2 49 2 67 2 112

Ç 1/129

Ç 1/138

Ç 1/234

Circlip pliers

milling, sawing,broaching tools, lathe tools, knurling tools, indexable tools formilling,drilling, turning,groovingand threading

Content – Cutting Tools

Ç 2/144

Ç 2/163

Ç 2/202

Internal circlip pliers, straight

2/10–2/14

BoreTypemillingcutters

Lathe chucks, centrepunches, toolholders, tapping chucks, vices, clamps, vacuum chucks, magnetic clamps

Design: DIN 5256, C-shape, straight. Application: For assembling internal safety rings.

5617

Ç 1/X made of chrome-vanadium steel, hardened and tempered in oil, polished head. especially stable tips, non-slip due to cone base. plastic-covered handles. made of chromium-vanadium steel, forged, hardened and tempered in oil, polished head. Non-slip due to special tip shape. plastic-covered handles. Precision design. made of chromium-vanadium electric steel, forged, head grey atramentised, with inserted tips made of highest-grade, drawn spring steel wire with large contact surface, hence no twisting of the rings. Utmost precision due to screwed hinge, as such can be highly loaded with a service life that is 10 times longer than normal in continuous operation. plastic-coated handles. Precision design with opening restriction. As order No. 5619, additionally with opening restriction for standard installation in series production. Ç 1/X Ç 1/X Ç 1/X Ç 1/X Ç 1/X O m 2 14 2 14 2 32 2 33 endmills,hss 2 50 2 53

Ç 3/39

Ç 3/133

Ç 3/173

Ç 1/X

2 10

Ç 1/X

2 10

Ç 1/X

2 12

m

calipers,micrometers,dial indicators,externaland internal calipers,measuringstands,gaugeblocks, ringgaugesand mandrels,magnifiers,microscopes,squares, folding rulers, tape measures, lasermeasuring technology,waterbalances,scales, concentricityandshaft testingdevices,measurementand controlpanels,heightandmarkinggauges,surface roughness testers,stopwatchesandmeasuringand testing instruments screw vicesand clamps,electronicwaterpumpsand grippliers,wire cutters, strippingand crimping tools, tools forphotovoltaics, voltageand continuity testers, bolt cutters, screws, ratchets,plugs,hooks,hexand Torx spanners, friction ratchets, sparking tools socketwrench setsand kits, tool sets,workshop trolleys, slidingand foldingworkbenches,power socket inserts, torquewrenches, screwdriversand sets,bitsandaccessories, tweezers, files, scrapers, metal saws,hammers, chisels,pinpunches,punches, strippersandautomotive tools Wirebrushes, sheetmetal shearsandpunches, pipewrenches,pipe cleaningand testingequipment, pipebendersand cutters, installation,woodworking andmasonry tools, knives,glass cutters, toolboxes and cases Ç 1/X Ç 1/X Ç 1/X 2 20 2 48 2 55

5617

2/15–2/35

rantiert er alle ßen gut Ç 4/89

5614

Cutting Tools 2

Ç 4/104

Ç 4/131

5614

5619

Ç 1/X

2 15

Ç 1/X

2 16

2/46–2/53

endmills, solid carbide

Screwed joint

Ç 5/107 Item numbers: every single article is identified by an explicit item number. The item number consists of the 4-digit main number that you can find above the price column and the 4-digit end number that defines the different types or sizes of the respective article. Ç 5/131 Ç 6/193 Ç 6/217 Ç 1/X Ç 1/X 2 47 2 47

5619

Ç 5/78

5668

2/53–2/100

endmills, solid carbide

5668

Screwed joint

Ç 6/117

5618

Ç 1/X made of high-strength rolled steel, with interchangeable tips made of special tool steel and a detachable locking mechanism. Head and grips black powder varnished. Ç 1/X 2 71 2 99

Ç 1/X

2 53

Ç 1/X

2 54

circular sawblades hss-/hm-equipped hole saws/accessories

O m

2/101–2/109 2/110–2/116

Ç 7/47 All prices incl. VAT per piece (if not stated otherwise). Ç 7/81

Ç 7/35

5618

m

sharpening, cuttingandgrindingdiscs, diamondwheels, cuttingdiscsandpins, sharpeners onbackingmaterial, fleece, sharpeningpinsand files, abrasives,handlappers,polishing tools,grindingand polishingpastes

5617

5614

5619

5668

5618

Size

order No. 0000 0001 0002 0003 0004 0005 0006

Length mm

hole ∅ mm

Ç 8/87 Table of Contents: general reference: All texts, that are highlighted in yellow , constitute general reference texts. Ç 8/89 cabledrums, currentdistributors,hand-heldand site lamps,painters tools,brooms, solderingandwelding equipment,blind rivets,blind rivetnuts, compressed air couplingsand treatments, compressedairhoses, tyre inflators,blow-outpistols, cooling systems, marking, chemicalproductsand industrial safety Ç 1/X Ç 1/X Ç 1/X 2 101 2 107 2 108

5617

5614/5619/5668

5618

Ç 1/X

2 113

Ç 1/X

2 115

2/117–2/126 2/128–2/133

Jig-/saber sawblades machine-/band sawblades – –

J 0 J 1 J 2 J 3 J 4

7.90 7.35 7.80

10.25 10.25 10.90 12.40 20.90

13.40 13.40 14.05 15.85 27.30

145 145 185 230 310

140 140 180 225 320

– – – – –

8– 13 12– 25 19– 60 40–100 85–140 122–300 252–400

Ç 8/69

22.30 23.80

– – – –

2/133

hand sawblades

WorkshopEquipment Hand Tools 5 Ç 1/X 2 126

10.05 17.25

– – –

Ç 1/X J 5

– –

– –

– –

103.00 103.00 (W525)

– –

– –

570 580

Ç 1/X

2 117

Ç 1/X

2 117

Ç 1/X

2 120

2 128

Ç 1/X

2 133

Ç 9/60

Ç 9/79

Ç 9/131

9 Directories I

J 6

Toolbits – Lathes

2/134–2/136 2/137–2/142 2/144–2/148 2/149–2/151

Imprint, Index, ordernumbersdirectory

(W512)

(W525)

(W525)

(W525)

Knurling tools Broaching tools

Drilling tools

Internal circlip pliers, curved

Ç 1/X Design: DIN 5256, D-shape, curved. Application: For assembling internal safety rings. Ordernumbersdirectory Ç 1/X 2 147 2 151

Ç 1/X

2 134

Ç 1/X

2 138

Ç 1/X

2 140

Ç 1/X

2 144

Ç 1/X Ç 1/X Normal angleof rake30°, core thickness thicker thannormal and without coregradient.Thedrillhas a verygood self-centringbehaviour. Application: Fordrillholes withverynarrow∅tolerances and very good surfaces.suitable fordrilling extremelydeepholesup to20 x Dwithhigh cutting speeds.particularly suitable for short-chipping materials such as cast iron,grey cast iron,malleable cast iron and nodulargraphite iron and aluminium alloyswith ahigh silicon content. Note: Thedrills canbe sharpened several times. Ç 1/X 2 202 2 207 Design: Ultra-finestgrain-solid carbide, factory standard, typerT100T. TiAlN coated surface, right cutting.special slot formwithdoublebevels, specialpointgeometry and specialpoint thinning.With inner cooling. RT 100 T method: • Millasurfaceatrightangletothestartangleofholemachining. • Produceacylindricalpilothole(toleranceF9)withadrillingdepth of at least1 xD. • Insertintothepilotholewithapprox.300rpmatf=500mm/min. • Setthecoolinglubricantpressureandspeed. • Continualdrillingtofulldrillingdepthwithoutreliefcycle. • Whendrillingthroughholeswithobliqueexit,reducethefeedrate v f to40% ca.1mmbeforebreaking through. 2 163 2 166 Deep hole drill, 20 x D Ç 1/X

XV • Afterreachingthedrillingdepth,switchofftherotation and coolant, extract in rapid traverse. • Conventionalcoolantlubricationmin.40bar

Indexablemilling /DrillingTools 2/163–2/189

5623

Ç 1/X made of chromium-vanadium steel, forged, hardened and tempered in oil, polished head. Non-slip due to special tip shape. plastic-covered handles. Precision design. made of chromium-vanadium electric steel, forged, head grey atramentised, with inserted tips made of highest-grade, drawn spring steel wire with large contact surface, hence no twisting of the rings. Utmost precision due to screwed hinge, as such can be highly loaded with a service life that is 10 times longer than normal in continuous operation. plastic-coated handles. made of high-strength rolled steel, with interchangeable tips made of special tool steel and a detachable locking mechanism. Head and grips black powder varnished. 2968 0519 2/241 2968 0524 2/213 2968 0524 2/241 2968 0530 2/213 2968 0530 2/241 2968 0536 2/213 2968 0536 2/241 2968 0539 2/213 2968 0539 2/241 2968 0540 2/213 2968 0540 2/241 2968 0548 2/213 2968 0548 2/241 2968 0553 2/218 2968 0554 2968 0915 2/247 2968 0917 2/222 2968 0917 2/247 2968 0918 2/223 2968 0918 2/247 2968 0919 2/223 2968 0919 2/247 2968 0924 2/222 2968 0924 2/247 2968 0925 2/222 2968 0925 2/247 2968 0928 2/222 2968 0928 2/247 2968 0930 2/222 2968 0930 2/247 2968 0932 2/222 2968 0932 2/247 2968 0940 2/222 2968 0940 2/247 2968 0942 2/222 2968 0942 2/247 2968 0944 2/222 2968 0944 2/247 2968 0946 2/222 2968 0946 2/247 2968 0953–0983 2/226 2968 1100–1115 2/230 2968 1118 2/183 2968 1118–1121 2/230 2968 1124 2/184 2968 1124 2/230 2968 1127 2/229 2968 1131 2/230 2968 1132–1133 2/229 2968 1137 2/230 2968 1138 2/183 2968 2330 2/208 2968 2330 2/236 2968 2333 2/183 2968 2333 2/208 2968 2333 2/236 2968 2336 2/208 2968 2336 2/236 2968 2339 2/181 2968 2339 2/183 2968 2339 2/208 2968 2339 2/236 2968 2342 2/234 2968 2345 2/206 2968 2345 2/234 2968 2348 2/206 2968 2348 2/234 2969 0000–0121 2/250 2969 0121 2/252 2969 0122 2/250 2969 0122 2/252 2969 0123 2/250 2969 0123 2/252 2969 0124 2/250 2969 0124 2/252 2969 0206–0224 2/251 2969 0300–0315 2/250 2969 0318–0353 2/251 2969 0355–0371 2/250 2969 0373–0530 2/251 2969 0730–0885 2/252 2969 0900–1235 2/253 2969 1300–2027 2/254 2969 3197–3242 2/257 2969 3970–4055 2/258 2969 4070–4145 2/259 2969 4170 2/260 Brushes....... 7/2–7/9, 8/59–8/61,8/64 . . . . . . . . . .9/19–9/20,9/22–9/24,9/35 Broomhandle . . . . . . . . . . . . . . . . . . . .9/23 Broomhead.. . . . . . . . . . . . . . . . . . . . .9/23 Bucket . . . . . . . . . . . . . . . . . . . . . . . . . .9/24 Dustpan . . . . . . . . . . . . . . . . . . . . . . . . .9/24 handBrush . . . . . . . . . . . . . . . . . . . . . .9/24 metalhandleholder. . . . . . . . . . . . . . .9/23 paintBrush. . . . . . . . . . . . 9/19–9/20,9/22 soldering FluidBrush . . . . . . . . . . . . . .9/35 FlapBrushes FlapBrushes,coarse. . . . . . . . . . . . . . .8/64 Non-Woven FlapBrush. . . . . . . 8/59–8/61 HoningBrushes honingBrushes. . . . . . . . . . . . . . . . . . . .7/3 RadialBristleBrushes radialBristleBrush. . . . . . . . . . . . . . . . .7/6 SiliconeBrushes siliconecarbideBrushes . . . . . . . .7/6–7/7 WireBrushes Ç 1/X Ç 1/X Ç 1/X 2 176 2 177 2 250 2 259 IndexableTurning ThreadingTools part-offTools made of chrome-vanadium steel, hardened and tempered in oil, polished head. especially stable tips, non-slip due to cone base. plastic-covered handles. Page OrderNo. Page OrderNo. Page OrderNo. Page OrderNo. Page 2968 0510 2/213 2968 0510 2/241 2968 0512 2/213 2968 0512 2/241 2968 0513 2/213 2968 0513 2/241 2968 0903 2/222 2968 0903 2/247 2968 0906 2/222 2968 0906 2/247 2968 0909 2/222 2968 0909 2/247 2968 2312 2/239 2968 2318 2/210 2968 2318 2/239 2968 2321 2/210 2968 2321 2/239 2968 2324 2/210 Index 2968 0518 2968 0518 2968 0519 2/213 2/241 2/213 2968 0912 2968 0912 2968 0915 2/223 2/247 2/222 2968 2324 2968 2327 2968 2327 2/239 2/210 2/239

OrderNo.

Page OrderNo.

2968 0150–0154 2/203 2968 0156 2/204 2968 0158 2/203 2968 0160–0175 2/204 2968 0300 2/206 2968 0300 2/235 2968 0302 2/206 2968 0302 2/234 2968 0303 2/206 2968 0303 2/235 2968 0304 2/206 2968 0304 2/235 2968 0306 2/206 2968 0306 2/235 2968 0308 2/206 2968 0308 2/235 2968 0309 2/206 2968 0309 2/235 2968 0312 2/206 2968 0312 2/235 2968 0315 2/206 2968 0315 2/235 2968 0318 2/206 2968 0318 2/235 2968 0321 2/206 2968 0321 2/234 2968 0325 2/206 2968 0325 2/234 2968 0327 2/206 2968 0327 2/234 2968 0331 2/206 2968 0331 2/234 2968 0333 2/206 2968 0333 2/234 2968 0337 2/206 2968 0337 2/234 2968 0350 2/208 2968 0350 2/237 2968 0354 2/207 2968 0354 2/236 2968 0356 2/208 2968 0356 2/237 2968 0361 2/183 2968 0361 2/207 2968 0361 2/236 2968 0363 2/208 2968 0363 2/236 2968 0364 2/181 2968 0364 2/183 2968 0364 2/208 2968 0364 2/236 2968 0368 2/208 2968 0368 2/237 2968 0371 2/208 2968 0371 2/237 2968 0374 2/183 2968 0374 2/208 2968 0374 2/237 2968 0380 2/208 2968 0380 2/237 2968 0383 2/208 2968 0383 2/237 2968 0386 2/208 2968 0386 2/237 2968 0389 2/181 2968 0389 2/183 2968 0389 2/208 2968 0389 2/237 2968 0392 2/183 2968 0392 2/208 2968 0392 2/237 2968 0395 2/183 2968 0395 2/208 2968 0395 2/237 2968 0440 2/212 2968 0440 2/240 2968 0443 2/212 2968 0443 2/240 2968 0446 2/212 2968 0446 2/240 2968 0449 2/212 2968 0449 2/240 2968 0500 2/213 2968 0500 2/241 2968 0502 2/213 2968 0502 2/241 2968 0503 2/213 2968 0503 2/241 2968 0505 2/213 2968 0505 2/241 2968 0506 2/213 2968 0506 2/241 2968 0507 2/213 2968 0507 2/241

2816 0003–0013 2/140 2822 0003–0013 2/140 2824 0003–0013 2/140 2826 0001–0011 2/137 2828 0001–0011 2/137 2830 0001–0011 2/137 2832 0001–0011 2/137 2836 0001–0013 2/140 2838 0001–0011 2/138 2840 0001–0013 2/138 2844 0001–0013 2/140 2846 0001–0011 2/138 2848 0001–0013 2/138 2852 0001–0007 2/141 2854 0001–0009 2/138 2858 0001–0011 2/141 2860 0001–0009 2/138 2866 0001–0007 2/141 2868 0001–0007 2/141 2870 0001–0007 2/139 2872 0001–0007 2/139 2878 0001–0007 2/141 2880 0001–0007 2/141 2886 0001–0011 2/141 2888 0001–0011 2/141 2890 0001–0009 2/139 2892 0001–0009 2/139 2898 0001–0009 2/142 2900 0001–0009 2/142 2902 0001–0009 2/139 2904 0001–0009 2/139 2908 0001–0011 2/142 2910 0001–0009 2/139 2912 0001–0013 2/139 2914 0001–0011 2/142 2916 0001–0011 2/142 2920 0006–0020 2/142 2935 0100 2/144 2936 0105 2/144 2938 0205–0215 2/144 2940 0205 2/144 2941 0100 2/145 2945 0100–0212 2/145 2946 0100–0212 2/145 2947 0100–0212 2/145 2948 0100–0212 2/145 2949 0103–0206 2/145 2952 0130–0155 2/146 2952 0200–0205 2/147 2955 0120 2/147 2959 0082 2/148 2960 0101–0163 2/148 2961 0101–0163 2/148 2964 0089–0163 2/148 2965 0089–0160 2/148 2967 0089–0160 2/148 2968 0052–0059 2/226 2968 0100 2/204 2968 0100 2/230 2968 0103 2/204 2968 0103–0104 2/230 2968 0106 2/204 2968 0106 2/230 2968 0109 2/204 2968 0109 2/230 2968 0111 2/204 2968 0111 2/230 2968 0112 2/204 2968 0112 2/230 2968 0115 2/184 2968 0115 2/204 2968 0115 2/230 2968 0118 2/204 2968 0118 2/230 2968 0121 2/184 2968 0121 2/204 2968 0121 2/230 2968 0124 2/203 2968 0124 2/229 2968 0128 2/183 2968 0128 2/203 2968 0128 2/229 2968 0130 2/203 2968 0130 2/229 2968 0134 2/203 2968 0134 2/229 2968 0137 2/203 2968 0137 2/229 2968 0140 2/203 2968 0140 2/229 2968 0142 2/203 2968 0142 2/229 2968 0145 2/203 2968 0145 2/229

order No. 2752 0001–0065 2/132 2752 0067–0103 2/133 2753 0001–0064 2/132 2753 0066–0106 2/133 2753 0109–0139 2/132 2753 0142–0154 2/133 2754 0011–0065 2/132 2754 0066–0100 2/133 2760 0001–0174 2/128 2761 0001–0177 2/129 2761 0178–0259 2/130 2761 0270–0275 2/129 2761 0285–0290 2/130 2763 3601–5302 2/131 2765 0001–0067 2/131 2766 0001–0043 2/130 2780 0001–0067 2/134 2782 0001–0091 2/134 2784 0001–0064 2/134 2786 0001–0040 2/135 2788 0001–0022 2/135 2790 0001–0049 2/135 2792 0001–0046 2/136 2794 0001–0046 2/136 2796 0001–0019 2/136 2797 0300–2000 2/54 2798 0300–2000 2/54 2799 0300–2000 2/62 2801 0001–2000 2/63 2802 0600–2000 2/64 2803 0300–2000 2/64 2805 0001–2000 2/65 2814 0003–0013 2/140 0001 0011 0021 0031 0041 0051 0061 2736 0046–0050 2/118 2736 0051–0052 2/119 2736 0055 2/121 2736 0057 2/122 2736 0060–0067 2/121 2736 0068 2/122 2736 0070 2/121 2736 0071 2/120 2736 0075–0101 2/121 2736 0105–0106 2/119 2736 0107 2/120 2736 0108–0109 2/122 2736 0110 2/120 2736 0111 2/122 2736 0120–0130 2/118 2736 0140 2/121 2736 0150–0175 2/120 2738 0005–0020 2/118 2738 0025 2/122 2739 0005–0020 2/118 2739 0025 2/122 2739 0040 2/118 2739 0045 2/122 2739 0050 2/118 2744 0010–0020 2/123 2744 0025–0042 2/125 2744 0050–0080 2/124 2746 0000–0005 2/126 2746 0007–0020 2/123 2746 0024–0045 2/125 2746 0052–0060 2/124 2746 0061 2/125 2746 0066–0080 2/124 2746 0130–0140 2/123 2746 0205–0235 2/125 2746 0240 2/124 2746 0245 2/125 2747 0001 2/133 2747 0001 6/194 2747 0005 2/133 2747 0005 6/194 2747 0010 2/133 2747 0010 6/194 2747 0015 2/133 2747 0015 6/194 2748 0010–0020 2/123 2748 0025 2/125 2748 0035 2/124 2748 0035–0042 2/125 2748 0055–0080 2/124 2748 0085–0145 2/126 2749 0020 2/133 2749 0020 6/194 2750 0005 2/133 2750 0005 6/194 2750 0010 2/133 2750 0010 6/194 2750 0015 2/133 2750 0015 6/194 2751 0001 2/133 2751 0001 6/194

5623

Note: Thedrills canbe sharpened several times.

Cutting Tools 1

FORMATplus17_UK_00_001-015.indd 15

23.08.17 08:14

Alldeepholesmustbepilotedbeforestartingtodrill. Deepholedrillsshouldneverbemovedfreelyinthe machinewhenatthefullspeed.

5615

2/1 CarpentersTools............ 7/53–7/54 carpentersmallets. . . . . . . . . . . . . . . . .7/54 carpentersset. . . . . . . . . . . . . . . . . . . .7/53 carpenterssquare. . . . . . . . . . . . . . . . .7/53 markingGauges. . . . . . . . . . . . . . . . . . .7/53 precisionBevel. . . . . . . . . . . . . . . . . . . .7/53 stainlessmarkingoutDevice. . . . . . . .7/54 CenteringDevices................ 3/125 precisioncenteringDevice– ceNTro. . . . . . . . . . . . . . . . . . . . . . . .3/125 ChiselHandProtection (MetalWorking)..... 6/210,7/52–7/53 Universalchiselhand protector. . . . .6/210 WoodChisels Woodchiselset . . . . . . . . . . . . . . . . . .7/53 Woodchiselwith TwoBlades . . . . . . .7/52 Woodchisels. . . . . . . . . . . . . . . 7/52–7/53 Chisels............. 5/144,6/208–6/210 Non-Arcingchisel. . . . . . . . . . . . . . . .5/144 ChiselsforMetalWorking crosschisels. . . . . . . . . . . . . . . . . . . .6/208 electricianschisels . . . . . . . . . . . . . . .6/209 Flatchisels. . . . . . . . . . . . . . . . . . . . . .6/208 Groovingchisels . . . . . . . . . . . . . . . . .6/210 Jointchisels . . . . . . . . . . . . . . . . . . . .6/209 partingchisels. . . . . . . . . . . . . . . . . . .6/210 slot&Bodychisels. . . . . . . . . . . . . . .6/209 splittingchisels. . . . . . . . . . . . . . . . . .6/209 Tilechisels. . . . . . . . . . . . . . . . . . . . . .6/209 CircleCutter..................... 1/105 circlecutter. . . . . . . . . . . . . . . . . . . . .1/105 circlecutterAccessories . . . . . . . . . .1/105 2/202–2/247 2/250–2/254 2/256–2/260 Digital/AnaloguecaliperGauges . . . . .4/61 InsideGroovecaliperGauges. . . . . . . .4/60 Calipers caliperAccessories. . . . . 4/13,4/24,4/26 compassverniercaliper. . . . . . . . . . . .4/94 Dialcalipers. . . . . . . . . . . . . . . . . . . . . . .4/8 Digital pocketcalipers. . . . . . . . . .4/8–4/12 DigitalWorkshopcalipers . . . . 4/17–4/20 vernier pocketcalipers. . . . . . . . . .4/6–4/8 Woodencases Forcalipers . . . . . . . . .4/17 Workshopcalipers . . . . . . . . . . 4/14–4/20 CarbideRod..................... 2/136 carbiderod. . . . . . . . . . . . . . . . . . . . .2/136 engravingBlank. . . . . . . . . . . . . . . . . .2/136 135 135 170 215 295 – – Calipers..... 4/60–4/61,4/94,4/13–4/17 . . . . . .4/6–4/12,4/18–4/20,4/24,4/26 Calipergauges

– – – – – clubshapehss64 . . . . . . . . . . . . . . .8/78 conical pointedG . . . . . . . . . . . . . . . . .8/78 conicalshapewithradius end L. . . . .8/77 cylindricalshapeA with end-Toothsystem. . . . . . . . . . . . .8/77 Dropshapeo . . . . . . . . . . . . . . . . . . . .8/78 Drumshapec. . . . . . . . . . . . . . . . . . . .8/77 hssBurrset. . . . . . . . . . . . . . . . . . . . .8/79 hss engraving point. . . . . . . . . . . . . . .8/79 hss LightmetalBurr . . . . . . . . . . . . . .8/79 pointed Treeshape. . . . . . . . . . . . . . . .8/77 C Cable......................... 9/2–9/6 extensioncables . . . . . . . . . . . . . . .9/5–9/6 extensionsockets. . . . . . . . . . . . . .9/4–9/5 reels. . . . . . . . . . . . . . . . . . . . . . . . .9/2–9/4 CableConnectors....... 5/69,5/71–5/72 cable Lug /cableconnector Assortment. . . . . . . . . . . . . . . . . . . . . . .5/69 crimpingset forcableconnectors. . . . . . . . . 5/71–5/72 mounting Tool formc3connectors. . .5/72 CableShears................ 5/48–5/52 Bowdencablecutters. . . . . . . . . . . . . .5/52 cableshears . . . . . . . . . . 5/48–5/49,5/51 cableshears–offset. . . . . . . . . . . . . .5/48 cableshears with TelescopicArm . . . . . . . . . 5/50–5/51 KT45/KT55cableshears. . . . . . . . . . .5/51 vDecableshears. . . . . . . . . . . 5/49–5/50 vDecableshears–offset. . . . . . . . . .5/49 Wirerope&cableshears. . . . . . . . . .5/52 Wireropeshears. . . . . . . . . . . . . . . . .5/52 CableTieTools......... 5/86,5/88–5/89 cable Layingsystem. . . . . . . . . . . . . . .5/86 cable Tie puller . . . . . . . . . . . . . 5/88–5/89 heatshrinks . . . . . . . . . . . . . . . . . . . . .5/89 CableTies.................. 5/87–5/88 Assortedcable Ties. . . . . . . . . . . . . . . .5/87 cable Ties. . . . . . . . . . . . . . . . . . . . . . . .5/87 cable Ties–Detachable. . . . . . . . . . . .5/88 cable Ties– ‚speedy‘Detachable . . . .5/88 cable Tieswithsteel Tips. . . . . . . . . . .5/88

Ç 1/X

2 172

Ç 1/X

2 173

5625

5615

Type RT 100 T

Solid carbide

Factory standard

DIN 6535-HA

2/217 2968 0559–0571 2/218 2968 0572 2/217 2968 0574–0583 2/218 2968 0670 2/215 2968 0670 2/243 2968 0673 2/215 2968 0673 2/243 2968 0674 2/215 2968 0674 2/243 2968 0676 2/215 2968 0676 2/243 2968 0679 2/215 2968 0679 2/243 2968 0681 2/215 2968 0681 2/243 2968 0700 2/215 2968 0700 2/245 2968 0703 2/215 2968 0703 2/245 2968 0704 2/215 2968 0704 2/245 2968 0706 2/215 2968 0706 2/245 2968 0708 2/215 2968 0708 2/245 2968 0709 2/216 2968 0709 2/245 2968 0712 2/216 2968 0712 2/245 2968 0715 2/216 2968 0715 2/245 2968 0716 2/216 2968 0716 2/245 2968 0718 2/216 2968 0718 2/245 2968 0724 2/215 2968 0724 2/245 2968 0725 2/215 2968 0725 2/245 2968 0730 2/216 2968 0730 2/245 2968 0731 2/216 2968 0731 2/245 2968 0736 2/215 2968 0736 2/245 2968 0741 2/219 2968 0742 2/216 2968 0742 2/245 2968 0744 2/219 2968 0747–0763 2/220 2968 0786 2/214 2968 0786 2/242 2968 0787 2/215 2968 0787 2/242 2968 0788 2/215 2968 0788 2/244 2968 0791 2/215 2968 0791 2/244 2968 0794 2/214 2968 0794 2/244 2968 0797 2/214 2968 0797 2/244 2968 0850–0865 2/226 2968 0870–0890 2/222 2968 0892–0894 2/221 2968 0894 2/246 2968 0897 2/221 2968 0897 2/246 2968 0900 2/222 2968 0900 2/247

20xD

135°

Screwed joint

3

Ç 1/X

2 238

Ç 1/X

2 242

5625

5624

– – withoutend-Toothsystem. . . . .8/69,8/72 Dropshape . . . . . . . . . . . . . . . . .8/70,8/73 FlameshapeB. . . . . . . . . . . . . . .8/71,8/74 pointed Treeshape. . . . . 8/70,8/74–8/75 roundArchsharperBF. . . . . . .8/71,8/74 TungstencarbideBurr . . . . . . . . . . . . .8/75 TungstencarbideBurrset . . . . . . . . . .8/72 HSSBurrs Angleshapehss63 . . . . . . . . . . . . . .8/78 Ballshape F. . . . . . . . . . . . . . . . . . . . . .8/78 – – I/29 Directories I AngleshapeWKN . . . . . . . . . . 8/71–8/73 Ballshape . . . . . . . . . . . . . . . . . .8/70,8/73 conical pointed . . . . . . . . . . . . . .8/70,8/74 conicalshapewithradius endKFL. . .8/71 cylindricalDrumWrc . . . . . . . .8/69,8/73 cylindrical ZYA, with end-Toothsystem. . . . . . . .8/69,8/73 cylindrical ZYA, BevelBrush . . . . . . . . . . . . . . . . . . . . . . .7/6 cupBrushes. . . . . . . . . . . . . . . . . . .7/4,7/8 De-carbBrushes. . . . . . . . . . . . . . . . . . .7/9 FileBrushes. . . . . . . . . . . . . . . . . . . . . . .7/2 handWireBrushes. . . . . . . . . . . . . . . . .7/2 plastichandlehandscratchBrushes . .7/2 rotaryWireBrushes. . . . . . . . . . . . . . . .7/5 spark plugBrushes. . . . . . . . . . . . . . . . .7/2 spindlemountedWireBrushes. . . . . . .7/7 TubeBrushes. . . . . . . . . . . . . . . . . . . . . .7/3 TwistKnotWireBrushes. . . . . . . . . . . . .7/5 WeldBrushes . . . . . . . . . . . . . . . . . . . . .7/2

11.60 11.60 11.80 13.10 22.40 2969 4175–4200 2/258 2969 4235–4260 2/259 2969 4300–4315 2/260 2969 4320–4330 2/259 2969 5000 2/217 2969 5003 2/214 2969 5003 2/242 2969 5009 2/207 2969 5012–5018 2/202 2969 5021 2/221 2969 5024 2/214 2969 5024 2/219 2969 5024 2/221 2969 5024 2/242 2969 5027 2/207 2969 5027 2/209 2969 5027 2/236 2969 5027 2/238 2969 5030 2/207 2969 5033 2/202 2969 5036 2/212 2969 5036 2/240 2969 5039 2/205 2969 5042 2/214 2969 5042 2/244 2969 5045 2/219 2969 5048 2/221 2969 5048 2/246 2969 5051 2/212 2969 5051 2/214 2969 505 2/217 2969 5051 2/221 2969 5051 2/240 2969 5051 2/244 2969 5051 2/246 2969 5054 2/202 2969 5054 2/205 2969 5054 2/209 2969 5057 2/202 2969 5057 2/205 2969 5057 2/207 2969 5060 2/214 2969 5060 2/219 2969 5060 2/221 2969 5060 2/242 2969 5063 2/212 2969 5063 2/214 2969 5063 2/217 2969 5063 2/221

2968 1138–1143 2/229 2968 1400–1433 2/234 2968 1550 2/239 2968 1553 2/211 2968 1553 2/239 2968 1556 2/211 2968 1556 2/239 2968 1603 2/210 2968 1603 2/239 2968 1606 2/210 2968 1606 2/239 2968 1609 2/210 2968 1609 2/239 2968 1612 2/210 2968 1612 2/239 2968 1616 2/210 2968 1616 2/239 2968 1618 2/210 2968 1618 2/239 2968 1621 2/211 2968 1621 2/239 2968 1624 2/211 2968 1624 2/239 2968 1627 2/211 2968 1627 2/239 2968 1636 2/210 2968 1636 2/239 2968 1640 2/210 2968 1640 2/239 2968 1642 2/210 2968 1642 2/239 2968 1646 2/210 2968 1646 2/239 2968 2180–2195 2/224 2968 2200–2220 2/225 2968 2294 2/183 2968 2294 2/229 2968 2297 2/183 2968 2297 2/229 2968 2300 2/203 2968 2300 2/229 2968 2303 2/183 2968 2303 2/203 2968 2303 2/229 2968 2306 2/203 2968 2306 2/229 2968 2309 2/203 2968 2309 2/229 2968 2312 2/210

TiAlN

steels up to 850 N/mm 2

steels up to 1000 N/mm 2

steels up to 1400 N/mm 2

hard machining over 60hrc

Ti steels, Ti alloys, special steels

stainless and acid- resistant steels (INoX)

steels up to 42hrc

steels up to 52hrc

steels up to 56hrc

steels up to 60hrc

copper, brass, bronze

cast iron materials

Al,Al and mg alloys

Order No. 1234

5624

110

110

110

80

50

110

100

120

5624

5623

5615 5625 Burrs ............ 8/69–8/75,8/77–8/79 BurrAccessories spindle. . . . . . . . . . . . . . . . . . . . . . . . . .8/79 CarbideBurrs

order No. At the end of the catalogue you will find the key and the number directory . ∅m7/ h7 mm 1234 TiAlN spiral length I 2 mm shank length I 3 mm overall length l 1 mm shank∅ d 2 =h6 mm 6WHHOV XSWR 1PP f mm/rev order No. ∅m7/ h7 mm 1234 TiAlN spiral length I 2 mm shank length I 3 mm overall length l 1 mm

6WHHOV XSWR

Size

Length mm

hole ∅ mm

shank∅ d 2 =h6 mm

1PP

f mm/rev

5623 5615/5625 5624

J 01 J 11 J 21 J 31 J 41 J 51 J 61

8.35 7.80 8.55

15.25 15.25 15.45 17.05 29.10

130 130

– – – – –

8– 13 12– 25 19– 60 40–100 85–140 122–300 252–400

0300 0350 0400 0450 0500 0550 0600 0650

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5

238.70

70 36 100 96 36 136 96 36 136 118 36 158 118 36 158 140 36 180 140 36 180 162 36 202

6 0.100 6 0.125 6 0.125 6 0.125 6 0.125 6 0.160 6 0.160 8 0.200

0700 0750 0800 0850 0900 1000 1200 1400

7.0 7.5 8.0 8.5 9.0

368.40 399.30 432.20 475.40 481.60 481.60 535.10 761.50 (W114)

162 36 202 8 0.200 183 36 223 8 0.200 183 36 223 8 0.200 205 40 249 10 0.250 205 40 249 10 0.250 227 40 271 10 0.250 274 45 323 12 0.250 318 45 367 14 0.315

238.70 ◊

253.10

160.170 210.215 305.300

281.90 ◊

10.70 17.90

288.10 300.50 333.40 362.20 (W114)

10.0 12.0 14.0

– –

103.50 103.50 (W525)

– –

590 600

Design: Ultra-finestgrain-solid carbide, factory standard. TiAIN coated surface, right cutting.special slot formwithdouble bevels, specialpointgeometry and specialpoint thinning.With inner cooling.Normal angleof rake30°, core thickness thicker thannormal andwithout coregradient.Thedrillhas a verygood self-centring behaviour. Application: Fordrillholes withverynarrow∅tolerances and very good surfaces.suitable fordrilling extremelydeepholesup to25 x Dwithhigh cutting speeds.particularly suitable for short-chipping materials such as cast iron,grey cast iron,malleable cast iron and nodulargraphite iron and aluminium alloyswith ahigh silicon content. Note: Thedrills canbe sharpened several times. www.format-quality.com Deep hole drill, 25 x D

CableTools....................... 5/86 cable puller . . . . . . . . . . . . . . . . . . . . . .5/86

(W512)

(W525)

(W525)

Directories I

Type RT 100 T

Solid carbide

Factory standard

DIN 6535-HA

25xD

135°

I/4

5/36

3

TiAlN

steels up to 850 N/mm 2

steels up to 1000 N/mm 2

steels up to 1400 N/mm 2

hard machining over 60hrc

Ti steels, Ti alloys, special steels

stainless and acid- resistant steels (INoX)

steels up to 42hrc

steels up to 52hrc

steels up to 56hrc

steels up to 60hrc

copper, brass, bronze

cast iron materials

Al,Al and mg alloys

Order No. 1235

100

100

100

70

50

100

130

110

6WHHOV XSWR

6WHHOV XSWR

1235

1235

∅m7/ h7 mm

∅m7/ h7 mm

order No.

spiral length I 2 mm

order No.

spiral length I 2 mm

shank length I 3 mm

overall length l 1 mm

shank∅ d 2 =h6 mm

shank length I 3 mm

overall length l 1 mm

shank∅ d 2 =h6 mm

1PP

1PP

f mm/rev

f mm/rev

TiAlN

TiAlN

XIII

0300 0350 0400 0450 0500 0550 0600 0650

3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5

261.40

85 36 125 116 36 156 116 36 156 143 36 183 143 36 183 170 36 210 170 36 210 197 36 237

6 0.100 6 0.125 6 0.125 6 0.125 6 0.125 6 0.160 6 0.160 8 0.200

0700 0750 0800 0850 0900 1000 1200

7.0 7.5 8.0 8.5 9.0

413.70

197 36 237 8 0.200 223 36 263 8 0.200 223 36 263 8 0.200 250 40 294 10 0.250 250 40 294 10 0.250 277 40 321 10 0.250 337 45 386 12 0.250

261.40 ◊ 281.90 316.90 329.30 393.10 405.40 (W114) 343.70 ◊

458.90 ◊

500.10

545.40 ◊ 607.10 ◊ 607.10 ◊

10.0 12.0

699.70 (W114)

Range overview

16

Ç 1/12

Ç 1/85

Ç 1/111

guaranteed over all good dimensions FormAT means for you: Best quality with an outstanding price-performance ratio. An added value that benefits you immediately. You can be assured of the follo- wing: FormAT products meet the strictest quality requirements and are therefore perfectly suita- ble for daily use in industry and craft. With FormAT you have a bigger choice, more possibilities when equipping your company. What else do you need?

Ç 2/16

Ç 2/101

Ç 2/128

Ç 3/4

Ç 3/25

Ç 3/34

gara übe Maß

Ç 4/10

Ç 4/44

Ç 4/75

Ç 5/3

Ç 5/21

Ç 5/71

Ç 6/2

Ç 6/74

Ç 6/107

Ç 7/2

Ç 7/13

Ç 7/25

m

Ç 8/2

Ç 8/13

Ç 8/50

m

Ç 9/2

Ç 9/26

Ç 9/55

Ç 2/54

Imprint Ç I/2

Index Ç I/2–I/26

Order numbers directory Ç I/27–I/37

XIV

Range overview

17

m

Drills, circular cutters, countersinks, reamers, thread-cutters, thread-millers, chisels, drill bits and deburring tools

Cutting Tools 1 Cutting Tools 2 Clamping Systems 3 Measuring Equipment 4 Hand Tools 5 Hand Tools 6 Hand Tools 7 Abrasives 8 Soldering/Welding/

Ç 1/129

Ç 1/138

Ç 1/234

milling, sawing, broaching tools, lathe tools, knurling tools, indexable tools for milling, drilling, turning, grooving and threading

Ç 2/144

Ç 2/163

Ç 2/202

Lathe chucks, centre punches, tool holders, tapping chucks, vices, clamps, vacuum chucks, magnetic clamps

Ç 3/39

Ç 3/133

Ç 3/173

m

calipers, micrometers, dial indicators, external and internal calipers, measuring stands, gauge blocks, ring gauges and mandrels, magnifiers, microscopes, squares, folding rulers, tape measures, laser measuring technology, water balances, scales, concentricity and shaft testing devices, measurement and control panels, height and marking gauges, surface roughness testers, stopwatches and measuring and testing instruments screw vices and clamps, electronic water pumps and grip pliers, wire cutters, stripping and crimping tools, tools for photovoltaics, voltage and continuity testers, bolt cutters, screws, ratchets, plugs, hooks, hex and Torx spanners, friction ratchets, sparking tools socket wrench sets and kits, tool sets, workshop trolleys, sliding and folding workbenches, power socket inserts, torque wrenches, screwdrivers and sets, bits and accessories, tweezers, files, scrapers, metal saws, hammers, chisels, pin punches, punches, strippers and automotive tools Wire brushes, sheet metal shears and punches, pipe wrenches, pipe cleaning and testing equipment, pipe benders and cutters, installation, woodworking and masonry tools, knives, glass cutters, tool boxes and cases

tiert alle n gut Ç 4/89

Ç 4/104

Ç 4/131

Ç 5/78

Ç 5/107

Ç 5/131

Ç 6/117

Ç 6/193

Ç 6/217

Ç 7/35

Ç 7/47

Ç 7/81

m

sharpening, cutting and grinding discs, diamond wheels, cutting discs and pins, sharpeners on backing material, fleece, sharpening pins and files, abrasives, handlappers, polishing tools, grinding and polishing pastes

Ç 8/69

Ç 8/87

Ç 8/89

cable drums, current distributors, hand-held and site lamps, painters tools, brooms, soldering and welding equipment, blind rivets, blind rivet nuts, compressed air couplings and treatments, compressed air hoses, tyre inflators, blow-out pistols, cooling systems, marking, chemical products and industrial safety

Workshop Equipment

Ç 9/60

Ç 9/79

Ç 9/131

9 Directories I

Imprint, Index, order numbers directory

XV

Content – Cutting Tools

18

All items marked with this icon have been added to our range. m

Ç 1/X 8

Ç 1/X

12

Ç 1/X

15

Ç 1/X

53

Ç 1/X

56

Ç 1/X

61

Ç 1/71

Ç 1/X

83

Ç 1/X

84

Ç 1/X

87

Ç 1/81

Ç 1/X

94

Ç 1/X

97

Ç 1/X

97

Ç 1/91

Ç 1/X

105

Ç 1/X

107

Ç 1/X

109

m

Ç 1/100

Ç 1/X

127

Ç 1/X

129

Ç 1/X

134

Ç 1/113

Ç 1/X

138

Ç 1/X

142

Ç 1/X

142

m

Ç 1/146

Ç 1/X

164

Ç 1/X

170

Ç 1/X

172

Ç 1/191

Ç 1/X

223

Ç 1/X

224

Ç 1/X

225

Content – Cutting Tools

19

1/4–1/46

Spiral drills HSS/HSS-E

1/8

Spiral drill bits

1/47–1/50 1/51–1/52

Interchangeable drills

Short stepped multi-twist drills

Cutting Tools 1

Ç 1/X

20

Ç 1/X

41

Ç 1/X

51

Centre/NC tap drills HSS/ solid carbide

m

1/53–1/57

Spiral drills carbide/solid carbide 1/58–1/82 Single lip drills carbide/solid carbide 1/80–1/81

Ç 1/X

62

Ç 1/X

74

Ç 1/X

78

1/83–1/90

Stone/concrete drills

1/87 1/91

Drill bits Chisels

1/92–1/93

Wood drills

Ç 1/X

91

Ç 1/X

92

Ç 1/X

92

1/94–1/104

Sheet/step/core drills

Ç 1/X

99

Ç 1/X

101

Ç 1/X

104

1/105

Circle cutters Countersinks

1/106–1/126

Ç 1/X

110

Ç 1/X

115

Ç 1/X

126

1/127–1/137

Deburrers

Ç 1/X

135

Ç 1/X

135

Ç 1/X

137

1/138–1/151

Reamers

m

Ç 1/X

143

Ç 1/X

146

Ç 1/X

149

1/152–1/222

Thread drills/formers

Ç 1/X

179

Ç 1/X

183

Ç 1/X

199

1/225–1/229

Die stocks/cutting nuts Accessories for thread cutting tools Thread milling cutters

1/230–1/231 1/232–1/235

Ç 1/X

230

Ç 1/X

231

Ç 1/X

235

1/1

Pictograms and Cutting Data

20

Pictogram Abstracts

HSS Co5

HS steel with 5% Cobalt alloy content

Solid carbide

High-speed- HSS

Tool material

e.g. HSS

Solid carbide

Cutting Tools 1

Equiv. to DIN 208 Form B – Spiral fluted

Complies with the European standard 22568

e.g. DIN

EN 22568

DIN 338

Standard

Equiv. to DIN 338

208-B

Machining of materials with normal resistance and hardness

Machining of materials with high resistance and hardness

Machining of materials with low resistance and hardness

Type H

e.g. Type N

Type W

Type

Number of cutting edges

Number of teeth 4 (4 cuts)

Z 4

e.g.

2–3

Chamfer 2–3 threads, Form C

Thread

e.g.

M

Metric thread

With edge angle 60°

60°

C

Metric ISO threads/FORUM Usage class 2 Medium tolerance 6H

ISO 2 6H

Tolerance

e.g. H7

Tolerance zone H7

Cyl. shaft with Carrier surface acc. to DIN 1835 B

Shaft design

e.g.

Cylinder shaft

DIN 1835-B

Countersink with 90° point angle

Point angle

e.g.

Spiral drill 130° point angle

130°

90°

Right spiral with 25° to 30° angle

Left spiral with approx. 7° angle

Spiral angle

e.g.

ca. 7°

25–30°

For through and blind holes

Application

e.g.

Feed direction

Dry machining possible

Cutting speed and feed rate

All information regarding cutting speed and feed rate correspond to a recommended guideline. This requires stable machine conditions, a low-vibration workpiece and the use of a suitable coolant.

Symbol mapping

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard processing over 60 HRC

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Ti, Ti-alloy and special steels

Al, Al- and Mg alloy

Copper, brass, bronze

Rust and acid resistant steels (INOX)

Cast-iron materials

Order No. 1040

C

C

C

C

C

U

C

V

C

C recommended

U suitable

V limited suitability

Mapping of values Cutting speed V c

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard processing over 60 HRC

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Ti, Ti-alloy. and special steels

Al, Al- and Mg alloy

Copper, brass, bronze

Rust and acid resistant steels (INOX)

Cast-iron materials

Order No. 1040

35

35

25

25

19

30

35

30

50

Font bold = recommended

Font normal = suitable

Example calculation (Spiral drill ∅ 4.0 mm, mild steel up to 850 N / mm 2 )

6WHHOV XSWR

Order No.

∅ h8 mm

Value sought 1:

n =

number of revolutions per minute (r/min)

1PP

etc.

etc.

f mm/rev

V c x 1000 __________ D x ∏

Formula:

n =

0101 0102 0103 0104 0105 0106

1.0 2.0 3.0 4.0 5.0 6.0 etc.

0,090 0,095 0,100 0,105 0,110 0,115

35 m/min x 1000 __________________ 4.0 mm x 3,14159

Calculation:

n =

Solution:

n =

2785/min

Value sought 2:

v f v f v f v f

= = = =

feed rate (mm/min)

Formula:

n x f

Calculation:

2785/min x 0.105 mm/U

etc.

Solution:

292 mm/min

etc.

1/2

21

Surface finishing

Tools made of high speed steel or carbide because of their generally good basic properties are supplied with a bright finish without extra surface treatment. For special applications it is recommended that tools are optimised for diverse applications by surface finishing processes, to achieve the following goals:

Cutting Tools 1

Surface finishing benefits at a glance

– Extended service life – Lower cutting pressure – Higher cutting speeds and feed rates

Wear- and diffusion resistance Hardness, toughness Heat hardness, oxidation stability Hardness, toughness, wear resistance Lower slippage resistance Hardness, wear resistance on cast iron Extreme hardness, extreme heat resistance Lower slippage resistance, high wear resistance High hardness, low friction coefficient

TiN

TiCN

– Better surface quality – Better dry processing – Optimised hard processing

TiAlN

AlTiN

Fire

Steam

Nitrated

Titanium-nitride coating TiN Titanium-nitride is a gold-coloured protective layer applied by a PVD process (Physical Vapour Deposition). Higher hardness combined with a lower friction coefficient achieves a significantly longer service life and improved cutting performance. The TiN coating is primarily used for drills and thread bores. Titanium carbon-nitride coating TiCN Titanium carbon-nitride is a wear-protection layer applied by PVD, being harder than TiN and having a lower friction coefficient. Tool performance is increased through greater hardness and ductility combined with improved wear. The TiCN coating is primarily used for NC drill bits, thread bores and end mills Titanium aluminium-nitride coating TiAlN Titanium aluminium-nitride is a multi-layer ceramic coating applied using the PVD method. The resulting greater hardness and oxidation stability make this coating ideal for higher speeds and feed rates for extended tool life. The TiAlN coating is used mainly in drilling and milling machine processes, and is also recommended for dry processing. Aluminium titanium-nitride coating AlTiN Aluminium titanium nitride has a higher Al content compared to titanium aluminium nitride. This ensures an even higher oxidation resistance and has a greater layer hardness. The AlTiN coating is used mainly in drilling and milling machine processes, and is also recommended for dry processing. Zirconium nitride coating ZrN Zirconium nitride is suitable for machining non-ferrous materials, and especially for aluminium alloys. This coating is not good for cold welding of aluminium. Associated with high layer hardness and oxidation resistance are advantages that increase tool service life and effective feed rate and cutting speed.

Sirius

Fire coating (TiAIN/TiN)

Fire

Fire is a TiAIN/TiN multi-layer coating with a gradient structure. The combined benefits of TiAlN and TiN coatings are very good wear resistance with high thermal stability, hardness and toughness. In addition to the conventional wet application, this layer can also be used for minimum quantity lubrication and dry machining. Fire coating is suitable for all spiral drills, thread bores and end mills, as well as removable discs. Steam tempering steam Steam tempering is a form of surface processing which reduces slide resistance and prevents edge build-up. Cold welding can also be avoided. Steam tempering is primarily used with drills and thread bores. Nitriding Nitrated Nitriding is a surface machining process that increases hardness and wear resistance. Particularly for working with highly abrasive materials such as cast iron, which nitriding is particularly suitable for. Nitriding is primarily used with drills and thread bores. Signum coating (TiALN/SiN) Signum Due to the special nano-composite structure with a protective layer of TiALN and SiN, this coating, with 5500 HV, is one of the hardest on the market. Particularly for difficult-to-machine materials. High heat wear resistance combined with high diffusion resistance. Sirius coating (TiAlN/zirconium nitride) Sirius Sirius coating for the protection against damages to the thread cutter: the combination of TiAlN and zirconium nitride generates particularly tough tool surface with low friction values.

Surface finishing processes compared

Surface

Colour

Coating structure

Thickness

Hardness

Friction coefficient

Application

finish

µm

HV

versus steel temperature

gold-yellow light brown

single-layer multi-layered multi-layered multi-layered

1–4 1–4

2300 3000 3200 3300 1300 5500 3400 3400 400

0.50 0.40 0.55 0.60

max. 600 C° max. 400 C° max. 750 C° max. 850 C° max. 550 C° max. 550 C° max. 800 C° max. 800 C° max. 900 C°

TiN

TiCN

violet

3

TiAlN

AITiN

red

2–6

Fire

grey

surface treatment surface treatment

max. 5

– –

Steam Nitrated

silver-grey red-bronze pale gold light-gold

20

multi-layered multi-layered

1–5 1–5

0.55 0.40 0.50

Signum

Sirius

multi-layer

0.1–3

ZrN

1/3