Catalog FORMAT plus 2017 - 2018

Drilling tools 117

Information on articles for cable screw-connections The threads are metric ISO precision thread, each with a gradient of 1.5 for all sizes. In distribution cabinets with wall thicknesses up to max. 3-5.5 mm, cable screw connections are screwed into the body. The thread core hole is drilled with one of our stepped drills for cable screw

connections. Special cutting tap bits (M12-M32) have been developed for the corresponding thread. The cutting taps have a long pilot tip, which is used to fix the tool in the hole in order to create a 100 % aligned thread, even with single-sided pressure. The tap drive is designed so that it can be operated with a standard hexagon insert ("nut) and a ratchet using just one hand. This type of drive saves time and space.

Cutting Tools 1

m

Special cutting tap bit for cable screw connections

Design: Short design with hexagon drive for working with one hand, including in difficult to access areas. Guide pins for thread core holes for perfect, aligned threads. Drive with nut and ratchet. For metric ISO precision thread DIN 13. Application: Specially for processing distribution boxes with wall thicknesses of 3.0 mm to max. 5.5 mm.

ISO 2 6H

MF

HSS

1311

Thread

Order No. 0012 0016 0020 0025 0032

Gradient mm

Total length mm

Cutting length mm

Thread ∅ mm

Width of keys

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5

13.40 22.10 30.30 40.40 67.20 (W135)

1.5 1.5 1.5 1.5 1.5

51 51 51 51 51

16.5 16.5 16.5 16.5 16.5

10.5 14.5 18.5 23.5 30.5

SW 8 SW 10 SW 13 SW 13 SW 13

Electrical assortment

Design: Supplied in a robust plastic case with foam inlays for safe tool storage.

HSS ISO 2 6H

MF

1311

Set contents

Order No. 1000

Special cutting tap bits M12 x 1.5; 16 x 1.5; 20 x 1.5; 25 x 1.5; 32 x 1.5 Stepped drill with spiral slots EC 10 for ∅ 7–32.5/M12 x 1.5/M32 x 1.5

206.00

(W135)

Milling stepped drill

Design: HSS, TiN coated surface. Milling stepped drill with cross point. Chuck slippage is avoided by the 3-surface shank. With laser print of hole ∅ and speed. Application: For burr-free drilling and reaming of sheets, pipes and profiles as well as for milling long holes and contours.

HSS

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1323

C

C

V

V

V

C

C

1323

Drill steps ∅

Order No.

Step length

Total length

Shank ∅

mm

mm

mm

mm

TiN

0412

4–12

26.40 (W124)

10

80

6

m

Universal milling drill cyl. Shank

Design: HSS. Short model. Milling blades with chip breakers. Application: Suitable for drilling and milling thin-walled materials.

Type N

HSS

118°

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1323

C

C

V

V

U

1323

∅ mm

Order No. 0060 0080

Total length mm

Shank ∅ mm

6 8

5.80 7.95

90 90

6 8

(W135)

1/99

Articles marked ◊ are not held in stock, procurement is effected at short notice.