Catalog FORMAT plus 2017 - 2018

Thread cutting tools 213

Blind hole machine tap "Synchro"

Design: HSS-E PM, DIN 371 or DIN 376, tolerance range ISO 2/6 H, type INOX, with point form C (2–3 threads). TiN coated surface

DIN 376

ISO 2 6H

HSS-E PM

DIN 371

6HX

M

M3 –M10 DIN 371 with reinforced shank, M12–M20 DIN 376 with overflow shank.

2–3

Type INOX

Cutting Tools 1

60°

Application: For regular metric threads according to ISO DIN 13. Particularly suitable for rust/acid-resistant steels such as sulphured steels, austenitic steels, martensitic steels and ferritic steels. Note: HSS-E PM is distinguished by its high resilience (stronger edge stability, wear resistance) and a higher tool life. Only for use in connection with synchronised drilling chuck ( Ç 3/115) as well as only for CNC machining.

≤ 3xd

50°

C

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1707

25

25

15

30

Thread 1707

Thread 1707

Order No.

Gradient mm

Total length mm

Shank ∅ mm

Square shank mm

Core hole ∅ mm

Order No.

Gradient mm

Total length mm

Shank ∅ mm

Square shank mm

Core hole ∅ mm

TiN

TiN

0030 0040 0050 0060 0080

M3 32.70 M4 33.40 M5 35.80 M6 42.00 M8 50.60

0.50 56 3.5 2.7 2.50 0.70 63 4.5 3.4 3.30 0.80 70 6.0 4.9 4.20 1.00 80 6.0 4.9 5.00 1.25 90 8.0 6.2 6.80

0100 0120 0160 0200

M10 61.10 M12 69.10 M16 100.50 M20 144.50

1.50 100 10.0 8.0 8.50 1.75 110 9.0 7.0 10.20 2.00 110 12.0 9.0 14.00 2.50 140 16.0 12.0 17.50

(W165)

(W165)

Through-hole machine tap

Design: HSS-E, DIN 371 or DIN 376, tolerance range ISO 2/6H, type H, with spiral point form B (4-5 threads).

4–5

DIN 371

DIN 376

ISO 2 6H

Type H

M

HSS-E

60°

≤ 3xd

B

M2 –M10 DIN 371 with reinforced shank, M12–M24 DIN 376 with overflow shank.

1705

Application: For regular metric threads according to ISO DIN 13. Particularly suitable for high strength steels such as tempered steels, alloyed cold work steels and high-speed steels.

bright

1708

steam

1710 TiCN

1709

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1705 1708 1710 1709

8

6 8 8 8

10 12 12

1705

1708

1710

1709

Thread

Order No.

Gradient

Total length

Shank ∅

Square shank

Core hole ∅ mm 1.60 2.05 2.10 2.50 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 15.50 17.50 21.50

mm

mm 45 50 50 56 63 70 80 90 100 110 110 110 125 140 160

mm

mm 2.1 2.1 2.1 2.7 3.4 4.9 4.9 6.2 8.0 7.0 9.0 9.0 11.0 12.0 14.5

bright

steam

TiCN

TiAlN

0020 0025 0026 0030 0040 0050 0060 0080 0100 0120 0140 0160 0180 0200 0240

M2

16.80 18.65

– – –

37.00 36.70 36.70 18.25 16.30 17.30 18.90 21.20 25.70 41.80 67.80 71.40

– – – – – –

0.40 0.45 0.45 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 3.00

– – –

M2.5 M2.6*

–

M3 M4 M5 M6 M8

10.45 10.45 11.00 11.00 12.60 15.35 20.00 25.30 28.30 41.60 94.80 (W164) –

12.05 12.05 12.75 12.75 14.60 17.75 23.10 29.20 32.60 47.60 47.90

3.5 4.5 6.0 6.0 8.0 10.0 9.0 11.0 12.0 14.0 16.0 18.0

47.50 46.30 59.30 75.30

M10 M12 M14 M16 M18 M20 M24

127.00 103.00

–

–

99.90

164.00

–

117.00 (W166)

–

* No longer included in DIN 13.

(W164)

(W165)

1/195

Articles marked ◊ are not held in stock, procurement is effected at short notice.