Catalog FORMAT plus 2017 - 2018

Drilling tools

33

Spiral drill set with cyl. Shank, rolled

Design: Rolled, right cutting, with precise point geometry. Robust design Application: Cost-effective alternative for handheld machines.

DIN 338

Type N

HSS

118°

25–30°

1008 0001– 0009 1008 0011

Cutting Tools 1

Supplied: Sets consisting of (Order No. 1008) 1 piece of each spiral drill size, in a sturdy metal cassette. Supplied: Set consisting of (Order No. 1008) 10 of each ∅ 1.0–8.0 (increasing by 0.5), 5 of each ∅ 8.5–10.0 (increasing by 0.5), in a sturdy metal case with 2 integrated locks and carrying handle.

1008 0001–0009

1008 0011

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1008

U

U

V

1008

Set contents ∅ h8 mm

Order No. 0001 0003 0005 0007 0009 0011

Number of drills Piece

Increasing mm

1.0– 5.9 6.0–10.0 1.0–10.0 1.0–10.5 1.0–13.0 1.0–10.0

28.80 61.00 15.70 28.20 34.50

50 41 19 24 25

0.1 0.1 0.5

0.5 + K.B.*

0.5 0.5

111.00 (W102)

170

* With intermediate sizes for tapped holes: 1 piece each ∅ 3.3; 4.2; 6.8; 10.2 mm.

Spiral drill with reduced shank

Design: HSS, DIN 338, type N. Rolled, right cutting with offset shank. Normal angle of rake, core thickness and core gradient. Application: The roll forged finish of the spiral drill prevents breaks in the joint. This makes it particularly suitable for robust drilling work – as a cost-effective alternative for handheld machines.

DIN 338

Type N

HSS

118°

25–30°

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1035

16

1035

∅ h8 mm 10.5 11.0 11.5 12.0 12.5 13.0 13.5 13.5 14.0 14.0 14.5 14.5 15.0 15.0 15.5 15.5 16.0 16.0

Order No. 1050 1100 1150 1200 1250 1300 1350 1351 1400 1401 1450 1451 1500 1501 1550 1551 1600 1601

Spiral length mm

Total length mm

Shank ∅ mm

4.28 4.59 4.90 5.60 5.75 6.10 7.10 7.10 7.80 7.80 8.75 8.75

87 94 94 101 101 101 108 108 108 108 114 114 114 114 120 120 120 120

133 142 142 151 151 151 160 160 160 160 169 169 169 169 178 178 178 178

10 10 10 10 10 10 10 13 10 13 10 13 10 13 10 13 10 13

10.60 10.60 11.85 11.85 12.70 12.70 (W118)

1/15

Articles marked ◊ are not held in stock, procurement is effected at short notice.