Catalog FORMAT plus 2017 - 2018

Milling Cutters 335

Solid Carbide 4 Flute Rippa Cutter with Through Coolant

Design: Ultra-fine grit solid carbide, type NRf, DIN 6527, 30°, fire-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. With inner cooling: Increase in tool life of up to 50%, since chip blockage is reduced. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish.

Type NRf

Z 4

DIN 6527

Solid carbide

DIN 6535-HB

30°

Cutting Tools 2

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2391

150

150

80

60

115

130

30

6WHHOV XSWR

2391

∅ d 1

h10

Order No.

Cutting length l 2

Overall length l 1

Shank ∅ d 2

h6

1PP

f z mm

mm

mm

mm

mm

Fire

0600 0800 1000 1200 1600 2000

6 8

104.00 113.00 123.50 150.50 232.00 346.00 (W221)

13 19 22 26 32 38

57 63 72 83 92

6 8

0.017 0.024 0.030 0.036 0.045 0.057

10 12 16 20

10 12 16 20

104

Design: Ultra-fine grit solid carbide, type HR, according to factory standard, 45°, TiAlN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Particularly suitable for machining stainless steel . Solid Carbide Stub Multi-Flute Rippa Cutter

Type HR

Z 4–6

Solid carbide

Factory standard

DIN 6535-HB

45°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2398

338

252

170

170

338

2398

2398

∅ d 1 h10 mm

∅ d 1 h10 mm

Order No.

Cutting length l 2 mm

Order No.

Cutting length l 2 mm

Overall length l 1 mm

Shank ∅ d 2 h6 mm

Number of teeth f z

Overall length l 1 mm

Shank ∅ d 2 h6 mm

Number of teeth f z

mm

mm

TiAlN

TiAlN

0600 0800 1000

6 35.90 8 42.00 10 62.70

7 9

54 58 66

6 8

4 0.016 4 0.021 4 0.026

1200 1600 2000

12 80.60 16 131.00 20 211.00

16 22 26

73 82 92

12 16 20

4 0.032 5 0.030 6 0.022

14

10

(W212)

(W212)

2/81

Articles marked ◊ are not held in stock, procurement is effected at short notice.