Catalog FORMAT plus 2017 - 2018

Milling tools 344

Solid Carbide Necked 2 Flute Ball Nose Slot Drills for hard Machining

Design: Solid carbide NANO, type N, according to factory standard, 30°, TiAlN-S-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for copy milling. The neck chip channel

Type N

Z 2

Solid carbide

Factory standard

DIN 6535-HA

30°

HSC

10

makes optimum tool range possible and thus makes it suitable for mould-making

applications. The tool life increases with minimal amount lubrication or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for HSC machining up to 70 HRC .

Cutting Tools 2

TiAlN-S

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2422

229

229

190

190

190

+DUG PDFKLQLQJ RYHU +5F f z

+DUG PDFKLQLQJ RYHU +5F f z

2422

2422

∅ d 1 h8

∅ d 1 h8

Order No.

Ra- dius r mm

Cutting length l 2 mm

Order No.

Ra- dius r mm

Cutting length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

TiAlN-S

TiAlN-S

mm

mm

mm

mm

2050 2100 2150 2200 2300

0.5 35.30 1.0 35.80 1.5 33.00 2.0 33.00 3.0 33.00

0.25 0.7 40 – – 4 0.005 0.50 1.5 50 0.95 3 6 0.022 0.75 2.0 50 1.45 4 6 0.034 1.00 2.5 50 1.95 5 6 0.046 1.50 4.0 60 2.85 10 6 0.069

2400 2500 2600 2800

4.0 33.00 5.0 35.50 6.0 35.50 8.0 59.50

2.00 5.0 60 3.85 10 6 0.093 2.50 6.0 60 4.85 12 6 0.105 3.00 7.0 60 5.85 15 6 0.107 4.00 9.0 80 7.70 15 8 0.122 5.00 11.0 80 9.70 25 10 0.136

3000 10.0 98.30

(W212)

(W212)

Solid Carbide 2 Flute Necked Ball Nose Slot Drills

Design: Ultra-fine grit solid carbide, type H, according to factory standard, 30°, Signum-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools.

Type H

Z 2

Solid carbide

Factory standard

DIN 6535-HA

30°

HSC

Dry machining possible. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with minimal amount lubrication or air cooling.

The tool can either be used with a pivoted or straight spindle. Suitable for HSC machining up to 62 HRC . Note: Copy milling, cutting values preferred at ap = 0.05 x d 1 and ae = 0.1 x d 1 .

Signum

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 2423

200

150

130

100

80

200

6WHHOV XSWR +5F f z

6WHHOV XSWR +5F f z

2423

2423

∅ d 1 h8

∅ d 1 h8

Order No.

Radius r ± 0.015 mm

Cutting length l 2 mm

Order No.

Radius r ± 0.015 mm

Cutting length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank ∅ d 2 h6 mm

Signum

Signum

mm

mm

mm

mm

0050 0080 0100 0150 0200 0300 0400

0.5 43.60 0.8 43.60 1.0 38.70 1.5 38.70 2.0 37.80 3.0 38.70 4.0 40.70

0.25 0.75 38 0.4 10 3 0.010 0.40 1.20 38 0.7 10 3 0.012 0.50 1.50 38 0.9 10 3 0.015 0.75 2.25 38 1.4 10 3 0.020 1.00 3.00 57 1.9 21 6 0.025 1.50 5.00 57 2.7 21 6 0.030 2.00 6.00 57 3.7 21 6 0.035

0500 0600 0800

5.0 40.70 6.0 41.10 8.0 51.80

2.50 8.00 57 4.7 21 6 0.038 3.00 9.00 57 5.7 21 6 0.040 4.00 12.00 63 7.7 27 8 0.050 5.00 15.00 72 9.5 32 10 0.070 6.00 18.00 83 11.5 38 12 0.080 8.00 24.00 92 15.5 44 16 0.100

1000 10.0 70.00 1200 12.0 93.80 1600 16.0 159.00

(W221)

(W221)

2/90