Catalog FORMAT plus 2017 - 2018

Drilling tools

42

m

Spiral drill with reduced shank

Design: Profile grinding, right cutting, with precise cross point geometry, offset shank, normal angle of rake, core thickness and core gradient. Application: Very well suited to drilling larger drill diameters with all conventional drills with a chuck measuring up to 13.0 mm.

DIN 338

Type N

HSS

118°

20–30°

Cutting Tools 1

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1027

16

12

5

2

1027

1027

∅ h8

∅ h8

Order No.

Spiral length mm

Total length mm

Shank ∅

Order No.

Spiral length mm

Total length mm

Shank ∅

mm 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0

mm 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0 19.5 20.0

mm

mm

bright

bright

0105 0110 0115 0120 0125 0130 0135 0140 0145 0150

11.80 11.80 12.50 13.30 14.90 14.85 15.50 17.80 19.75 21.90 (W118)

87 94 94 101 101 101 108 108 114 114

133 142 142 151 151 151 160 160 169 169

10 10 10 10 10 10 10 10 10 10

0155 0160 0165 0170 0175 0180 0185 0190 0195 0200

24.30 28.20 30.10 33.60 33.60 33.60 34.20 35.20 35.20 41.80 (W118)

120 120 125 125 130 130 135 135 140 140

178 178 184 184 191 191 198 198 205 205

10 10 13 13 13 13 13 13 13 13

High-performance spiral drill with cylinder Shank

Design: HSS Co8, DIN 338, type N. Profile grinding, TiAIN coated surface, with high concentricity and graduation precision as well as HSS Co8 for extremely high thermal resistance. Point thinning with cross point according to NAS 907 P3 of the aircraft industry standards. Normal angle of rake, core thickness much thicker than normal and core gradient smaller than normal. Application: High-performance spiral drill for particularly strong and high strength alloys based on CrNi, Hastelloy ® , Inconel ® , Monel ® , Nimonic ® , rust, acid and heat-resistant steels, hard-wearing sheets and steels and bronzes up to 1400 N/mm 2 in strength. The special cross grind geometry allows very good drilling behaviour, better and cleaner hole accuracy, and excellent hole exit.

HSS Co8

DIN 338

Type N

135°

30°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Copper, brass, bronze

Cast iron materials

Al, Al and Mg alloys

Order No. 1020

22

12

20

15

12

15

7LVWHHOV 7LDOOR\V VSHFLDO VWHHOV f mm/rev

7LVWHHOV 7LDOOR\V VSHFLDO VWHHOV f mm/rev

1020

1020

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

mm

mm

TiAlN

TiAlN

0100 0150 0200 0250 0300 0310 0320 0330 0350 0400 0410 0420 0450 0500 0510 0520 0550 0580 0600

1.0 5.80 1.5 5.45 2.0 5.25 2.5 5.25 3.0 5.25 3.1 6.05 3.2 5.80 3.3 5.80 3.5 5.80 4.0 5.90 4.1 6.60 4.2 6.60 4.5 6.60 5.0 6.45 5.1 7.20 5.2 7.20 5.5 8.00 5.8 7.70 6.0 7.45

10 12 10 18 10 24 10 30 10 33 10 36 10 36 10 36 10 39 10 43 10 43 10 43 10 47 10 52 10 52 10 52 10 57 10 57 10 57

34 40 49 57 61 65 65 65 70 75 75 75 80 86 86 86 93 93 93

0.008 0.025 0.025 0.032 0.040 0.040 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.050 0.063 0.063 0.063 0.063 0.080

0650 0680 0700 0750 0800 0850 0900 1000 1020 1050 1100 1150 1200 1250 1300 1350 1400 1500 1600

6.5 11.65 6.8 12.90 7.0 11.90 7.5 12.40 8.0 13.80 8.5 13.80 9.0 15.85 10.0 17.25 10.2 21.60 10.5 21.90 11.0 23.60 11.5 28.70 12.0 31.40 12.5 35.80 13.0 38.50 13.5 62.70 14.0 53.70 15.0 70.60 16.0 75.70

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1

63 69 69 69 75 75 81 87 87 87 94 94

101 109 109 109 117 117 125 133 133 133 142 142 151 151 151 160 160 169 178

0.080 0.080 0.080 0.080 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.125 0.125 0.125 0.125 0.125

101 101 101 108 108 114 120

(W100)

(W100)

1/24