Catalog FORMAT plus - EDE 2015 - 2017

1148

Screwdriver bits

Countersink bit 90° with 1/4" bit shaft

Design: 90° countersink angle. Radial taper-ground, with straight clamping slots and clamping frames ground from full pieces. Also provided with cutting and clearance angles for the most common materials. With hexagonal shaft. Application: Suitable for universal chatter and burr-free tapping, countersinking, milling and deburring work. The countersink bit can also be used as a hand deburrer together with the corresponding activation tools such as grips, toggles or ratchets with a 1/4" hexagon mount. Recommended for steels up to 850 N/mm 2 and Al, Al and Mg alloy,

DIN 335-C

Z 3

HSS

90°

limited suitability for steels up to 1000 N/mm 2 . Note: Sufficient supply of coolant is essential.

1420

1420

Nominal ∅ mm

Nominal ∅ mm

Order No. 0630 0830 1040

Smallest ∅ mm

Total length mm

For counter- sink screws

Order No. 1240 1650 2050

Smallest ∅ mm

Total length mm

For counter- sink screws

6.3 8.3 10.4

4.79 5.65 6.50

1.5 2.0 2.5

31 31 34

M3 M4 M5

12.4 16.5 20.5

7.75 9.80 11.55

2.8 3.2 3.5

35 40 41

M6 M8

M10

(134)

(134)

Countersink bit set 90° with hexagonal shaft Design: Supplied in a robust, high quality plastic cassette with automatic countersink setup function when opened incl. universal holder with 1/4" hexagon mount and drilling paste.

1422

Design

Order No. 0005

Nominal ∅ mm 6.4–20.5

9-piece

69.10

(134)

6 Hand Tools

Cutting tap 1/4" bit

Design: Tap bit, 1/4" hexagon mount for metric ISO thread according to DIN 13. Application: Cutting tap bits are designed for thread tapping with cordless screw drills and handheld drills with left and right motion. However, they are also suitable for tapping by hand and on stationary drilling machines. Your cordless screw drill should have a minimum power of 7.5 Volt. Make sure that the tool axis and hole axis are precisely aligned and use appropriate cutting oil. rpm: lowest settings (0–450 min -1 ), torque: maximum setting. Recommended for steels up to 850 N/mm 2 , limited suitability for Al, Al and Mg alloy.

DIN 13

M

HSS

1/4"

1649

1649

Nominal ∅ mm

Nominal ∅ mm

Order No.

Total length mm

Cutting length mm

Width of keys

Order No.

Total length mm

Cutting length mm

Width of keys

mm

mm

0030 0040 0050

M3 M4 M5

3.42 3.42 4.22 (161)

33 35 36

11 12 15

6.35 6.35 6.35

0060 0080 0100

M6 M8

4.22 6.15 7.20 (161)

39 40 41

18 19 21

6.35 6.35 6.35

M10

6/136

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).