Catalog FORMAT plus - EDE 2015 - 2017

1150

Screwdriver bits

m

Combi-bit SGE

Design: With cross-grinding and 1/4" hexagon shaft. Application: For drilling core holes, thread tapping and deburring in 1 step. The heat-treated induction zone allows for increased bending elasticity, thus significantly reducing the risk of fracture, thereby up to 50 % higher life. Combi-bits are designed for thread tapping with cordless drills and handheld drills with left and right motion. However, they are also suitable for tapping by hand and on stationary drilling machines. Material thickness not more than nominal thread ∅ (M6 = 6 mm material thickness). Particularly suitable for assembly work and small batches. Make sure that the tool axis and hole axis are precisely aligned and use appropriate cutting oil (Order No. 9829). Recommended for rust and acid resistant steels (INOX) steels, Al, Al and Mg alloy, copper, brass, bronze, limited suitability for steels up to 850 N/mm 2 .

M

60°

≤ 1xd

1/4"

HSS

1656 bright

HSS-E

1656

HSS

bright 1657

bright

1657

HSS-E

bright

1656

1657

Thread

Order No.

Gradient

Drill ∅

Total length

mm

mm 2.5 3.3 4.2 5.0 6.8 8.5 10.2

mm

bright

bright

0001 0003 0005 0007 0009 0011 0013

M3 M4 M5 M6 M8

5.55 5.55 5.55 5.55 7.55 9.25

8.75 8.75 8.75 8.75

0.50 0.70 0.80 1.00 1.25 1.50 1.75

36 39 41 44 50 59 66

10.05 12.00 22.80

M10 M12

14.20

(161)

(161)

m

Design: Supplied in a plastic box. Combi-bit SGE, set 1656 HSS

HSS

HSS-E

bright 1657

HSS-E

bright

6 Hand Tools

1656 bright

1657 bright

1656

1657

Ausführung Design

Bestell- Nr. Ord r o

Größe Size

Satzinhalt Se contents

blank right

blank right

0020

7-teilig piece

42,80

42.80

60,80

6 .80

M3–M10 -M

1 Adapter 6 Kombi-Bits M3; 4; 5; 6; 8; 10 a t c bits M ; 4; 5; 6; 8; 1

(161)

(161)

Cutting tap bit HexTap S

Design: Tap bit, 1/4" hexagonal drive for pipe threads according to DIN ISO 228. Application: Cutting tap bits are designed for thread tapping with cordless screw drills and handheld drills with left and right motion. However, they are also suitable for tapping by hand and on stationary drilling machines. Your cordless screw drill should have a minimum power of 7.5 Volt. Make sure that the tool axis and hole axis are precisely aligned and use appropriate cutting oil. Recommended for steels up to 850 N/mm 2 , limited suitability for Al, Al and Mg alloy.

DIN ISO 228

G HSS

1649

Nominal ∅ Zoll

Order No. 0250

Total length mm

Cutting length mm

Width of keys mm

G 1/8

6.80 (161)

40.5

17

6.35

6/138

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).