Catalog FORMAT plus - EDE 2015 - 2017

1451

Pressure reducer/maintenance units

m

Filter, multifix range

Design: Centrifugal separator with sintering filter element. With semi-automatic discharge valve and die cast zinc housing. Application: To clean compressed air from pneumatic tools, cylinders, valves etc.

9401

Connection thread inch

Order No.

Flow rate at 6 bar m 3 /h

Nominal width DN

Height

Max. operating pressure bar

Operating temperature °C

mm

0005 0010 0015 0020 0025

G 1/4 G 3/8 G 1/2 G 3/4

25.30 25.30 45.50 45.50 137.00

2100 2100 4000 4000 8000

6 152.1 10 152.1 15 181.8 20 181.8 25 305.8

16 16 16 16 16

60 60 60 60 60

G 1

(970)

m

Pressure regulator with manometer, multi-fix range

Design : Reversible diaphragm pressure regulator independent of supply pressure with secondary ventilation. The pressure can be adjusted by pushing in the hand wheel. Application: Reduces the fluctuating fuel line pressure on compressed air systems to the desired operating pressure to keep it constant. Note: Flow rate measurement: at P1 = 8 bar.

9402

Connection thread inch

Order No.

Flow rate

Nominal width DN

Height

Max. operating pressure bar

Operating temperature °C

l/min

mm

0005 0010 0015 0020 0025

G 1/4 G 3/8 G 1/2 G 3/4

36.50 36.50 54.50 54.50 140.00

1500 1500 6000 6000 12500

6 94.8 10.0 10 94.8 10.0 15 134.1 10.0 20 134.1 10.0 25 179.5 10.0

60 60 60 60 60

G 1

(970)

m

Design: With polycarbonate container and manometer. Reversible diaphragm pressure regulator independent of supply pressure with secondary ventilation, combined with a centrifugal separator. The pressure can be adjusted by pushing in the hand wheel. Application: To clean and regulate compressed air from pneumatic tools, cylinders, valves etc. Note : Flow rate measurement: at P1 = 8 bar. Filter regulator, multifix range

9404

Connection thread inch

Order No.

Flow rate

Nominal width DN

Height

Max. operating pressure bar

Operating temperature °C

l/min 1500 1500 3500 3500

mm

0005 0010 0015 0020

G 1/4 G 3/8 G 1/2 G 3/4

53.10 53.10 81.60 81.60

6

192.1 192.1 246.3 246.3

10.0 10.0 10.0 10.0

60 60 60 60

10 15 20

(970)

m

Maintenance unit, two-piece, multi-fix range

Design: Two-part maintenance unit. Comprising a reversible diaphragm pressure regulator independent of supply pressure with secondary ventilation, combined with a centrifugal separator and a proportional lubricator. Housing made of zinc die casting. Application: To clean and regulate and lubricate compressed air from pneumatic tools, cylinders, valves etc. Note: Flow rate measurement: at P1 = 8 bar.

9 Soldering/Welding/

Workshop Equipment

9405

Connection thread inch

Order No.

Nominal width DN

Flow rate

Height

Width

Max. operating pressure bar

Operating temperature °C

l/min

mm

mm

0005 0010 0015 0020

G 1/4 G 3/8 G 1/2 G 3/4

75.80 79.30 133.50 133.50

6

1100 192.1 92.8 1100 192.1 92.8 3500 246.3 134.8 3500 246.3 134.8

10 10 10 10

60 60 60 60

10 15 20

(970)

9/59

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.