Catalog FORMAT plus - EDE 2015 - 2017

Thread cutting tools 192

V-COIL thread repair assortment

Drilling: Bore out damaged thread with normal spiral drills. Boring out is not required for spark plug threads - the combined drilling and cutting tool should be used. Please note that larger holes are required for thread formers. Check: Check the tap and thread bolt for the same thread and gradient. Thread: Cut the mounting thread in the bored out hole with the special V-COIL taps. The use of cutting oil is recommended. Installing the thread insert: Place the insert on the tool and make sure that the carrier pin is in the slot opening and then make the right setting with the adjustment ring. Then turn in the thread insert in the thread direction applying light pressure. Do not turn against the running direction, as the pin can break off. Breaking the pin: After installation, take the insertion tool out and remove the carrier pin with the pin breaker. The pin should be removed

with long nose pliers for larger dimensions and spark plug threads. After completing these steps, a thread is produced that is often better and stronger than the original thread due to the narrow and exact tolerances as well as the spring thread forming. Supplied in plastic cassette: thread extractor, spiral drill in core hole dimensions, tap and thread inserts (1.5 x D). Application: Thread armouring of materials with low shearing resistance e.g. aluminium and magnesium alloys, in mechanical engineering, in automobile, electro and medical technology and in aviation and aerospace. Thread repair of damaged or worn threads. Reject recovery.

1 Cutting Tools

1652

Set contents

Order No. 0050 0075 0100

M5–M12 M6–M10

150.50

89.70

M6–M12 + M14 x 1.25

174.00 (161)

Thread inserts Design: Standard thread insert, free running made of stainless steel. 1.0 x D.

Design: Standard thread insert, free running made of stainless steel. 1.5 x D.

1652

1652

PU

PU

Size

Size

Order No. 0200 0210 0220 0230 0240 0250 0260 Order No. 0300 0310 0320 0330 0340 0350 0360

Order No. 0590 0595 0600 0605 0610 0615 0620

M3 M4 M5 M6 M8

14.50 14.50 16.55 17.60 18.65 23.80 35.20

M3 M4 M5 M6 M8

15.55 15.55 13.45 14.50 18.65 25.90 40.40

100 100 100 100 100 100 100

100 100 100 100 100 100 100

M10 M12

M10 M12

(161)

(161)

Design: Standard thread insert, free running made of stainless steel for spark plug thread.

Design: Standard thread insert, free running made of stainless steel. 2.0 x D.

1653

1653

PU

PU

Size

Size

Length of thread mm

Order No. 0840 1240 1640

M3 M4 M5 M6 M8

16.55 16.55 18.65 21.70 25.90 30.00 45.50

MF14 x 1.25 MF14 x 1.25 MF14 x 1.25

28.50 28.50 28.50

100 100 100 100 100 100 100

50 50 50

8.4 12.4 16.4

(161)

M10 M12

(161)

1/172

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).