Catalog FORMAT plus - EDE 2015 - 2017
Thread cutting tools 204
Through-hole machine tap
Design: HSS-E, DIN 371 or DIN 376, tolerance range ISO 2/6H, type H, with spiral point form B (4-5 threads) and exposed teeth. Bright surface
DIN 376
ISO 2 6H
Type H
DIN 371
M
HSS-E
M3 –M10 DIN 371 with reinforced shank, M12–M20 DIN 376 with overflow shank
1 Cutting Tools
60°
Application: For regular metric threads according to ISO DIN 13. Particularly suitable for high strength steels such as tempered steels, alloyed cold work steels and high-speed steels.
≤ 3xd
bright
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Al, AI and Mg alloys
Copper, brass, bronze
Cast iron materials
Order No.
1728
10
8
Thread 1728
Thread 1728
Order No.
Gradient
Total length mm
Shank ∅ mm
Order No.
Gradient
Total length mm
Shank ∅ mm
Square shank mm
Core hole ∅ mm
Square shank mm
Core hole ∅ mm
mm
mm
bright
bright
0030 0040 0050 0060 0080 0100
M3 M4 M5 M6 M8
22.20 22.20 20.50 20.80 23.30 27.80
0.50 56 3.5 2.7 2.50 0.70 63 4.5 3.4 3.30 0.80 70 6.0 4.9 4.20 1.00 80 6.0 4.9 5.00 1.25 90 8.0 6.2 6.80 1.50 100 10.0 8.0 8.50
0120 0140 0160 0180 0200
M12 M14 M16 M18 M20
33.10 48.50 47.30 74.90 72.50
1.75 110 9.0 7.0 10.20 2.00 110 11.0 9.0 12.00 2.00 110 12.0 9.0 14.00 2.50 125 14.0 11.0 15.50 2.50 140 16.0 12.0 17.50
(164)
M10
(164)
Through-hole machine tap
Design: HSS-E PM, DIN 371, tolerance range 6HX, type H, form E (1.5–2 threads) with internal cooling, TiAIN coated surface. M5–M10 DIN 371 with reinforced shank Application: For regular metric threads according to ISO DIN 13. Particularly suitable for high strength steels such as tempered steels, alloyed cold work steels and high-speed steels. Note: HSS-E PM is distinguished by its high resilience (stronger edge stability, wear resistance) and a higher tool life.
DIN 371
Type H
6HX
M HSS-E PM
60°
≤ 3xd
TiAlN
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Al, AI and Mg alloys
Copper, brass, bronze
Cast iron materials
Order No.
1711
14
12
10
6
20
1711
Thread
Order No.
Gradient
Total length
Shank ∅
Square shank
Core hole ∅
mm
mm 70 80 90 100
mm
mm 4.9 4.9 6.2 8.0
mm
TiAlN
0500 0600 0800 1000
M5 M6 M8
45.10 42.50 54.20 72.50
0.80 1.00 1.25 1.50
6 6 8
4.20 5.00 6.80 8.50
M10
10
(165)
Blind hole machine tap
Design: HSS-E PM, DIN 371 or DIN 376, tolerance range 6HX, type H, form C (2–3 threads) with internal cooling, TiAIN coated surface. M5–M10 DIN 371 with reinforced shank, M12 DIN 376 with overflow shank Application: For regular metric threads according to ISO DIN 13. Particularly suitable for high strength steels such as tempered steels, alloyed cold work steels and high-speed steels. Note: HSS-E PM is distinguished by its high resilience (stronger edge stability, wear resistance) and a higher tool life.
DIN 371
DIN 376
Type H
6HX
M HSS-E PM
60°
≤ 3xd
TiAlN
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Al, AI and Mg alloys
Copper, brass, bronze
Cast iron materials
Order No.
1711
14
12
10
6
20
1711
Thread
Order No.
Gradient
Total length
Shank ∅
Square shank
Core hole ∅
mm
mm 70 80 90 100 110
mm
mm 4.9 4.9 6.2 8.0 7.0
mm
TiAlN
0050 0060 0080 0100 0120
M5 M6 M8
41.80 39.90 47.70 67.30 62.10
0.80 1.00 1.25 1.50 1.75
6 6 8
4.20 5.00 6.80 8.50 10.20
M10 M12
10
9
(165)
1/184
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
Made with FlippingBook