Catalog FORMAT plus - EDE 2015 - 2017

321

Milling Cutters

Solid Carbide Vari-Helix 4 Flute End Mill

Design: Ultra-fine grit solid carbide, type N, DIN 6527, 35°/38°, fire-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Air cooling recommended. Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 1 x D. Can also be used for trimming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized.

VHM UF Solid carbide UF

Typ N

y e

DIN 6527

Z 4

DIN 6535-HB

35°/38°

9°

2 Cutting Tools

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2460

170

170

120

70

200

6WHHOV XSWR

2460

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

1PP

d 1

= h10 mm

f z mm

Fire

0600 0800 1000 1200 1400 1600 1800 2000

6 8

22.50 32.00 45.00 60.00 74.00 98.00

10 12 14 16 18 22 24 26

54 58 66 73 75 82 84 92

6 8

0.039 0.053 0.065 0.079 0.095 0.095 0.110 0.110

10 12 14 16 18 20

10 12 14 16 18 20

143.00 149.00

(220)

Shrink-fit chucks can be found from Ç 3/35.

2/75

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.