Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 336

Solid Carbide Stub Multi-Flute Rippa Cutter

Design: Ultra-fine grit solid carbide, type HR, according to company standard, 45°, TiAlN-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Particularly suitable for machining stainless steel .

Solid carbide UF

Z 4–6

Type HR

Factory standard

DIN 6535-HB

INOX

45°

8°

2 Cutting Tools

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2398

338

252

170

170

338

2398

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= h10 mm

f z mm

TiAlN

0600 0800 1000 1200 1600 2000

6 8

35.70 41.80 59.70 76.60

7 9

54 58 66 73 82 92

6 8

4 4 4 4 5 6

0.016 0.021 0.026 0.032 0.030 0.022

10 12 16 20

14 16 22 26

10 12 16 20

125.00 201.00

(212)

Design: Ultra-fine grit solid carbide, type HR, according to company standard, 45°, TiAlN-coated, with centre cut. Cutting speed approx. 50 % higher than with non-coated tools. Dry machining possible. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Particularly suitable for machining stainless steel . Solid Carbide Necked Multi-Flute Rippa Cutter

Solid carbide UF

Type HR

Z 4–6

Factory standard

DIN 6535-HB

INOX

45°

8°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2401

338

252

170

170

338

2401

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= h10 mm

f z mm

TiAlN

0600 0800 1000 1200 1600 2000

6 8

44.10 51.60 77.00 98.90

16 16 22 26 51 38

57 63 72 83

5.5 7.5 9.5

36 42 53 63 83 97

6 8

4 4 4 4 5 6

0.016 0.021 0.026 0.032 0.030 0.022

10 12 16 20

10 12 16 20

11.5 15.5 19.2

161.00 259.00

100 110

(212)

2/90

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).