Catalog FORMAT plus - EDE 2015 - 2017
Slitting Saw Blades 364
Design: Material no. 1.3243 HSS-E DMo5, bright, hardened and repeatedly annealed to 65–66 HRC. With collar, without pin holes. Tooth shape: BW. Application: Can be used on portable GF pipe saws. For cutting construction steels, non-alloyed tool steel, chrome steel and stainless steel, pipes made of high-alloy steels (stainless steel). The saw blades can be re-sharpened several times. HSSe Metal Slitting Saw Blade for GF Saws
HSS-E DMo5
bright
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Al, AI and Mg alloys
Copper, brass, bronze
Cast iron materials
Order No.
2 Cutting Tools
2654
C
C
2654
dia. x width x bore
Order No.
for wall thicknesses
Number of teeth BW
Tooth pitch T mm
mm
mm
bright
0001 0004 0007 0010 0013 0016 0019
63 x 1.6 x 16 63 x 1.6 x 16 68 x 1.6 x 16 68 x 1.6 x 16 68 x 1.6 x 16 80 x 1.8 x 16 80 x 1.8 x 16
35.70 35.70 38.30 38.30 38.30 48.20 48.20
2.5–5.5 1.2–2.5 2.5–7.0 1.5–4.0 1.0–2.5 from 2.5 1.2–2.5
44 64 44 64 84 64 80
4.5 3.1 4.9 3.3 2.6 3.9 3.1
(242)
HSS Metal Slitting Saw Blade
Design: Precision of keyway cutting in accordance with DIN 1840, hollow-ground. HSS-DMo5, bright, hardened and repeatedly annealed to 63–65 HRC –with or without collar according to manufacturer's specifications –high-precision ground. Without pin holes.
HSS DMo5
DIN 1837
DIN 1838
2655
DIN 1837 A –herringbone tooth, fine tooth pitch. Application: For thin-walled materials and shallow cutting depths. For machining short-chipping materials. DIN 1838 B –curved tooth, coarse tooth pitch. Application: For thick-walled materials and larger cutting depths. DIN 1838 C –curved tooth with roughing and finishing teeth, coarse tooth pitch Application: High stock removal capacity possible thanks to chip breaking. For thick-walled materials and medium to large cutting depths.
2656
2657
Tooth shape: Herringbone tooth A
Tooth shape: Curved tooth B
Tooth shape: Curved tooth C
Steels up to 850 N/mm 2
Steels up to 1000 N/mm 2
Steels up to 1400 N/mm 2
Hard machining over 60 HRC
Ti steels, Ti alloys, special steels
Stainless and acid- resistant steels (INOX)
Steels up to 42 HRC
Steels up to 52 HRC
Steels up to 56 HRC
Steels up to 60 HRC
Al, AI and Mg alloys
Copper, brass, bronze
Cast iron materials
Order No.
2655 2656 2657
C C C
2655
2655
∅ j15 mm
∅ j15 mm
Order No.
Order No.
Width j11 mm 0.20 0.25 0.30 0.40 0.50 0.60 0.80 1.00 1.20 1.60 2.00 2.50 3.00 4.00 5.00 6.00 0.20 0.25
Bore H7 mm
Number of teeth shape A
Width j11 mm 0.30 0.40 0.50 0.60 0.80 1.00 1.20 1.60 2.00 2.50 3.00 4.00 5.00 6.00 0.20 0.25 0.30 0.40
Bore H7 mm
Number of teeth shape A
Shape A
Shape A
0001 0004 0007 0010 0013 0016 0019 0022 0025 0028 0031 0034 0037 0040 0043 0046 0049 0052
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25
13.35 13.35 12.20 12.20 11.50 11.50 11.50 11.50 13.00 14.25 14.65 15.45 16.85 20.30 ◊ 23.70 ◊ 27.10 ◊ 13.85 ◊ 13.85 ◊
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 8 8
80 64 64 64 48 48 48 40 40 40 32 32 32 24 24 24 80 80
0055 0058 0061 0064 0067 0070 0073 0076 0079 0082 0085 0088 0091 0094 0097 0100 0103 0106
25 25 25 25 25 25 25 25 25 25 25 25 25 25 32 32 32 32
12.85 12.85 12.35 12.35 12.35 ◊ 12.35 13.55 14.45 ◊ 15.45 16.70 18.80 22.40 ◊ 26.10 ◊ 29.00 ◊ 14.70 ◊
8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
80 64 64 64 48 48 48 40 40 40 32 32 32 24 100 100 80 80
14.70 13.35 13.35
Fortsetzung nächste Seite
(240)
(240)
Continued overleaf
2/118
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
Made with FlippingBook