Catalog FORMAT plus - EDE 2015 - 2017

369

Slitting Saw Blades

HSS Metal Slitting Saw Blade

Design: Material no. 1.3343 (HSS-DMo5), bore H7, in accordance with DIN 1840, hollow-ground. The base material is laser-cut with a bright surface finish. Hardened and repeatedly annealed to 63–65 HRC.

HSS DMo5

2671

High-performance "Base Cut", wear-resistant coating according to the PVD process as protection against material pick-up, to improve tool life and use of coolant. Application: Can be used on manual, semi-automatic and fully automatic sawing machines. For cutting construction steels, non-alloyed tool steel, tough and hard and tough materials (V 2A, V 4A) with material strengths up to 850 N/mm 2 . Universal use for steel and stainless steel.

2 Cutting Tools

Tooth shapes: BW = Curved tooth with alternately bevelled up to 4 mm tooth pitch.

2673 Very powerful "Eco", highly wear-resistant coating according to the PVD process as protection against material pick-up, to improve tool life and use of coolant. Application: Can be used on manual, semi-automatic and fully automatic sawing machines. For cutting construction steels, non-alloyed tool steel, tough and hard and tough materials (V 2A, V 4A) with material strengths up to 1000 N/mm 2 . Universal use for steel and stainless steel.

2674

Highly wear-resistant TiN-coating. With significantly reduced friction coefficient and greater temperature stability. Application: Outstandingly for automatic sawing machines and for the use of minimum quantity lubrication/minimum quantity cooling. The highly wear- resistant coating and improved gliding properties make it the preferred choice for permanent use/serial cutting. Permits higher cutting speeds and feeds while increasing tool life at the same time.

TiN

HZ = Curved tooth with roughing and finishing teeth for all tooth pitches over 4 mm.

TiN

Steels up to 850 N/mm 2 85 85 120

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2671 2673 2674

20 20 40

20 40

2673

2674

2671

dia. x width x bore

Order No.

Teeth and tooth shape

Number NL/∅/circular pitch

Tooth pitch T

mm

mm

mm

TiN

0001 0003 0005 0007 0009 0011 0013 0015 0017 0019 0021 0023 0025 0027 0029 0031 0033 0035 0037 0039 0041 0043 0045 0047 0049 0051 0053 0055 0057

225 x 2.0 x 32 225 x 2.0 x 32 250 x 2.0 x 32 250 x 2.0 x 32 275 x 2.0 x 32 275 x 2.0 x 32 275 x 2.5 x 40 275 x 2.5 x 40 275 x 2.5 x 40 275 x 2.5 x 40 300 x 2.5 x 32 300 x 2.5 x 32 300 x 2.5 x 32 300 x 2.5 x 40 300 x 2.5 x 40 300 x 2.5 x 40 315 x 2.5 x 32 315 x 2.5 x 32 315 x 2.5 x 32 315 x 3.0 x 40 315 x 3.0 x 40 315 x 3.0 x 40 350 x 3.0 x 40 350 x 3.0 x 40 350 x 3.0 x 40 400 x 3.5 x 50 400 x 3.5 x 50 400 x 3.5 x 50 450 x 4.0 x 50

60.30 60.30 63.50 63.50 74.80 74.80 74.40 74.40 74.40 74.40

86.00 86.00 91.10 91.10

– –

120 HZ

2/8/45+4/9/50+2/12/64

6 4 6 4 6 4 8 6 5 4 8 6 4 8 6 4 8 6 4 8 6 4

180 BW 2/8/45+4/9/50+2/12/64

127.00 127.00 133.00 133.00 132.50 132.50 132.50 132.50 170.00 170.00 170.00 170.00 170.00 170.00 203.00 203.00 203.00 216.50 216.50 216.50

128 HZ

2/8/45+4/9/50+2/12/64

200 BW 2/8/45+4/9/50+2/12/64

113.00 113.00 115.50 115.50 115.50 115.50 137.50 137.50 137.50 137.50 137.50 137.50 153.50 153.50 153.50 173.50 173.50 173.50 205.00 205.00 205.00 304.50 304.50 304.50 589.00

144 HZ

2/8/45+4/9/50+2/12/64

220 BW 2/8/45+4/9/50+2/12/64

110 HZ 144 HZ 180 HZ 220 BW 120 HZ 160 HZ 120 HZ 160 HZ 240 BW 120 HZ 120 HZ 160 HZ 250 BW 110 HZ 140 HZ 180 HZ 100 HZ 140 HZ 180 HZ 100 HZ

2/8/55+4/12/64 2/8/55+4/12/64 2/8/55+4/12/64 2/8/55+4/12/64

101.00 101.00 101.00 101.00 101.00 101.00 119.50 119.50 119.50 129.50 129.50 129.50 157.50 157.50 157.50 254.00 254.00 254.00 457.00

2/8/45+4/9/50+2/12/64 2/8/45+4/9/50+2/12/64

240 BW 2/8/45+4/9/50+2/12/64

2/8/55+4/12/64 2/8/55+4/12/64 2/8/55+4/12/64

2/8/45+4/9/50+2/12/64

160 BW 2/8/45+4/9/50+2/12/64 250 BW 2/8/45+4/9/50+2/12/64

2/8/55+4/12/64 2/8/55+4/12/64 2/8/55+4/12/64 2/8/55+4/12/64 2/8/55+4/12/64 2/8/55+4/12/64 4/15/80+4/15/85 4/15/80+4/15/85 4/15/80+4/15/85 4/15/80+4/15/85

– – – – – – –

10

8 6

12

9 7

14

(243)

(243)

(243)

2/123

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.