Catalog FORMAT plus - EDE 2015 - 2017

371

Circular Saw Blades

Segmental Circular Saw Blade

Design: Segments made of HSS-DMo5, bright, hardened and repeatedly annealed to 63–65 HRC. Body made of hardened and tempered special steel with a strength of approx. 1400 N/mm 2 . The extremely tapered relief grinding of the segments in conjunction with the ground cooling channels ensures optimum coolant feed to the cutting area and thus guarantees optimum stock removal. Tooth shape HZ = Curved tooth with roughing and finishing teeth. Application: For cutting construction steel and non-alloyed tool steel with material strengths up to 850 N/mm 2 . Particularly suitable for machines with powerful drive capacities and changing material cross-sections. Note: Always use sufficient coolant.

HSS DMo5

2 Cutting Tools

Tooth shape HZ

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2677

50

2677

∅ x thickness x bore

Order No.

Number of teeth HZ

Number NL/∅/circular pitch

Tooth pitch T

mm

mm

mm

bright

0001 0004 0007 0010 0013 0016 0019 0022 0025 0028 0031 0034 0037 0040 0043 0046 0049 0052 0055

275 x 3.0 x 40 275 x 3.0 x 40 275 x 3.0 x 40 315 x 3.6 x 40 315 x 3.6 x 40 315 x 3.6 x 40 315 x 3.6 x 40 360 x 3.6 x 40 360 x 3.6 x 40 360 x 3.6 x 40 360 x 3.6 x 50 360 x 3.6 x 50 360 x 3.6 x 50 400 x 4.0 x 50 400 x 4.0 x 50 400 x 4.0 x 50 450 x 4.0 x 50 450 x 4.0 x 50 450 x 4.0 x 50

198.50 198.50 198.50 234.50 234.50 234.50 234.50 259.50 259.50 259.50 259.50 259.50 259.50 298.50 298.50 298.50 413.00 413.00 413.00

96

2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 2/8/55 + 4/12/64 4/15/80 + 4/15/85 4/15/80 + 4/15/85 4/15/80 + 4/15/85 4/15/80 + 4/15/85 4/15/80 + 4/15/85 4/15/80 + 4/15/85 4/15/80 + 4/15/85 4/15/80 + 4/15/85 4/15/80 + 4/15/85

9 7 6

120 144

70 84

14 12

112 140

9 7

96

12

128 160

9 7

96

12

128 160

9 7

80 96

16 13 10 16 13 10

128

90

108 144

(242)

Design: High-quality, carbide-tipped saw blades (dry cutters) for JEPSON cold circular saws, also suitable for universal use. Without pin holes. Special tooth shape. Application: Saw blades particularly suitable for dry cuts in metal. Saw fast, with little burr and without cooling. Steel, non-ferrous metals, composites and plastic, cable channels. Achieve high cutting quality and long tool lives. (Heed speeds, see table.) Carbide Tipped Circular Saw Blade for JEPSON Circular Saw

HM Carbide

Steels up to 850 N/mm#H2#

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2685

C

C

C

2685

∅ x thickness x bore mm 305 x 2.2/1.8 x 25.4 305 x 2.2/1.8 x 25.4 355 x 2.2/1.8 x 25.4 355 x 2.2/1.8 x 25.4

Order No. 0006 0011 0016 0021

Speed RPM U/min

Cutting speed m/min

Number of teeth

150.00 172.50 188.50 213.00

1300 1300 1300 1300

1200 1200 1400 1400

60 80 80 90

(241)

2/125

Articles marked ◊ are not held in stock, procurement is effected at short notice.