Catalog FORMAT plus - EDE 2015 - 2017

First page Previous page 378 Next page Last page

Carbide tipped keyhole saws 378

Carbide tipped keyhole saw

Design: With axial and radial special grinding, guaranteeing optimum cutting results. Carbide hole saws achieve long tool lives and can be reground several times. No breaking under increased loads. The tapered pilot drill ensures smooth spot drilling (spot marking is not required) and is fixed using a tightening screw. Scope of supply: Hole saw incl. drill. Application: Can be used on portable and pillar drilling machines. Note: With pillar drilling machines always choose manual feed.

HM Carbide

2715

Flat cut: With ejection spring. This ejects the drilled part and protects the carbide teeth during spot drilling. For material thicknesses up to 4 mm, stainless steel up to 2 mm. From 16–30 mm the hole saw is made in one piece. From 31 mm with specially hardened bit holders to compensate the torsion forces. We recommend MK 2/ MK 3 from 31 mm. The sturdy design results in high concentricity. The CAD-optimised rake angles with special cut ensure high cutting performance and tool life. For flat material MBS: With ejection spring. This ejects the drilled part and protects the carbide teeth during spot drilling. For material thicknesses up to max. 10 mm. (With material thicknesses over 6 mm the tool needs to be set down for chips to be emptied several times.) From 37 mm with specially har- dened bit holders to compensate the torsion forces. We recommend MK 2/MK 3 from 37 mm. The sturdy design and advanced cutting edge geometry achieves a significant improvement in cutting behaviour combined with a high cutting capacity and tool life. For flat material but also fur use on pipe material and curved surfaces. Deep cut: Without ejection spring. For material thicknesses up to 4 mm, stainless steel up to 2 mm. Especially for pipe material and curved surfaces.

Cup height: 12 mm ∅ 16– 50 mm ≙ 10 mm shaft ∅ 51–120 mm ≙ 13 mm shaft

2 Cutting Tools

2715

2722

Cup height: 22 mm ∅ 18– 36 mm ≙ 10 mm shaft ∅ 37–100 mm ≙ 13 mm shaft

2722

2728

Cup height: 12 mm ∅ 16– 50 mm ≙ 10 mm shaft ∅ 51–120 mm ≙ 13 mm shaft

2715

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2715 2722 2728

50 50 50

40 40 40

28 28 28

22 22 22

30 30 30

40 40 40

65 65 65

70 70 70

20 20 20

18 18 18

15 15 15

10 10 10

2715

2722

2728

2715

2722

2728

Saw ∅

PG/metric

Order No.

Flat cut

Deep cut

Flat cut

Deep cut

MBS

0160 0170 0180 0190 0200 0210 0220 0230 0240 0250 0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

27.50 27.50

– –

– – – –

M16

0400 0410 0420 0430 0440 0450 0460 0470 0480 0490 0500 0510 0520 0530 0540 0550 0560 0570 0580 0590 0600 0610 0620 0630

40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

44.90 68.00 75.30

M40

– – – – – – – – – – – – – – – – –

44.80 72.10

–

– – – – – –

27.50 47.10

46.60 72.10 87.00

–

47.10

46.80 72.10 46.80 72.10

– –

28.40 47.10 45.70 28.40 47.10 44.70 28.40 47.10 44.70 29.30 47.10 44.70 29.70 47.10 44.70 29.70 47.10 44.70 31.10 53.30 59.00

M20

46.80 72.10 87.00 49.90 75.00 98.00 51.30 77.20 98.00

PG 36

51.30 77.20 51.30 80.80

– –

M25

54.00 80.80 98.00

M50

31.10 53.30

–

54.00 80.80 55.60 83.00 56.00 85.20 56.60 85.20 60.90 93.60 62.20 93.60 62.20 93.60 62.70 96.50

– – – – – – – – – – –

– – – – – – – –

33.90 53.30 59.00

33.90 54.90

–

33.90 54.90 59.00

PG 42

41.20 62.00

–

56.60 85.20 110.50

41.20 62.00 68.10

M32

41.70 62.00

–

41.70 62.00 68.10 41.70 66.00 68.10

42.10 66.00

–

62.70 104.50 149.50

PG 48

44.90 68.00 75.30

PG 29

– – –

108.00 108.00 108.00

– –

–

44.90 68.00

– –

44.90 68.00 75.30

M63

(246)

Continued overleaf

2/132

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).

Made with FlippingBook