Catalog FORMAT plus - EDE 2015 - 2017

Jigsaw blades 380

Saw blade quality Soft wood: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can be used for hard woods, abrasive wooden mate- rials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.

Teeth milled, side clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics. Teeth ground, side clearance side set: Blade for clean, fast cuts in wood. Teeth ground, side clearance lead angle ground: Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade.

2 Cutting Tools

Jig saw blades for wood

Saw blade quality: HCS: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Teeth milled, clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics. Teeth ground, side clearance side set: Blade for clean, fast cuts in wood.

Teeth ground, side clearance lead angle ground: Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Design: 5 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2736 Cutting length

Bosch No. 2735

Order No.

Material

Wood

Tooth pitch

Type of tooth

Use

mm

mm

mm 2.7

0005

T 101 B

5.80

6.70

74

HCS

3–30

teeth ground; side clearance lead angle ground teeth ground; side clearance lead angle ground teeth ground; side clearance lead angle ground teeth ground; side clearance lead angle ground

For straight, fine cuts, fibre boards, plastic/epoxy, with plunge tip.

0010

T 301 CD

6.35

7.30

91

HCS

10–65

3

For straight, fine cuts.

0015

T 101 D

5.80

6.70

74

HCS

10–45 progressive 4–5.2

For straight, clean cuts, with plunge tip.

0020

T 101 BR

6.90

7.95

74

HCS

3–30

2.5

For straight, fine cuts, splinter-free sawing thanks to reverse tooth pattern.

0026

T 144 DP

–

7.30

74

HCS

5–50

4

ground; side set

For straight, exactly angled cuts, with plunge tip.

0027

T 119 B

–

3.56

67

HCS

2–15 progressive 1.9–2.3

Milled, wavy set

For soft wood, plywood, chipboard, wood core plywood, fibre boards.

0028

T 119 BO

–

4.91

56

HCS

2–15

2

Milled, wavy set

For soft wood, plywood, chipboard, wood core plywood, fibre boards, spe- cially designed for curved cuts.

0030

T 344 DP 11.95 13.75

126

HCS

5–100

4

ground; side set

For thick timber, soft wood, chipboard, wood core plywood, fibre boards, exactly angled cut.

0035

T 111 C

3.09

3.56

74

HCS

4–50

3

milled; side set

For soft wood, plywood, chipboard, wood core plywood, fibre boards, fast cut with plunge tip.

(248)

(247)

Continued overleaf

2/134

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).