Catalog FORMAT plus - EDE 2015 - 2017

383

Jigsaw blades

Jig saw blades for special applications

2735

Saw blade quality: Carbide-tipped: The HSC blade is equipped with carbi- de teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Saw blade quality: HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-fer- rous metals and metals. Carbide-tipped: The HSC blade is equipped with carbi- de teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.

Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.

2736

Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/ or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade. Design: 5 pieces on card,T 341 HM, 3 pieces on card. T 141 HM, 1 blade on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2 Cutting Tools

Bosch No. 2735 2736

Order No.

Cutting length mm

Material Wood

Plastic mm

Tooth pitch mm

Type of tooth

Use

mm

0008

T 101 BIF

–

12.85

59 Bimetal

1.5–15 –

1.7

Lead angle ground, teeth ground

Specially designed for laminate, plastic- coated boards and multiplex boards.

0056 T 301 CHM

–

31.40

91

TC

–

65

3.3

Carbide-tipped, ground

Specially designed for GRP and Corian.

0071

T 101 A

–

11.05

74 HSS

–

2–20

2

Lead angle ground, teeth ground

For fine, straight cuts, ideal for Plexiglas and polycarbonate.

0107

T 341 HM

–

31.40

106

TC

–

5–80 4.3

Carbide-tipped; side set

For fast, straight cuts, ideal for glass fibre rein- forced plastics, cement fibre boards, plasterboard.

0110

T 141 HM 10.20 11.80

74

TC

–

5–50 4.3

Carbide-tipped; side set

Specially designed for GRP, plasterboard, cement fibre boards.

(248)

(247)

Jig saw blades for plastics

Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades for clean cutting results in typical commercial plastics and moulds. Design: 5 pieces on card, T 108 BHM, and T 301 CHM 3 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

Saw blade quality: HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.

2736

Bosch No.

Order No. 0150

Cutting length mm

Material

Plastic mm 5–30

Tooth pitch mm

Type of tooth

Use

T 102 D

8.40

100

HCS

4.0

Lead angle ground, teeth ground

For the problem-free, clean sawing of polypropylene (PP) and similar soft thermoplastic materials.

0155

T 102 H

8.40

100

HCS

3–30

2.3

Lead angle ground, teeth ground

For the problem-free, clean sawing of PVC and similar soft thermoplastic materials.

0160

T 302 H

12.40

132

HCS

3–65

2.3

Lead angle ground, teeth ground

For PVC (polyvinyl chloride), is often used for windows and structural elements.

0165

T 102 BF

11.10

92

BIM 2–20

1.8

ground, side set

For the clean, splinter-free sawing of PMMA (polymethyl methacrylate), is used e.g. for balcony panelling and shower doors.

0170 T 108 BHM

22.20

92

TC

0–20

2.2

Carbide-tipped, ground Carbide-tipped, ground

For the clean sawing of CRP and similar plastics such as carbon fibres.

0175 T 301 CHM

31.00

117

TC

0–65

3.3

For the problem-free cutting of Corian® and similar solid surface materials such as Varicor®.

(247)

2/137

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.