Catalog FORMAT plus - EDE 2015 - 2017

Tool bits 398

Tool bit form A, round

Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are perpendicular, straight and non-machined. Hardness approx. 63–68 HRC. Tolerance for form A: Length: ± 2 mm ∅: h8 Application: Ground to be suitable for use as a form tool for hollowing, boring, engraving and copying in tool- and mould-making.

HSS Co10

DIN 4964

2780

2780

2780

∅ h8 mm

∅ h8 mm

∅ h8 mm

Order No. 0001 0004 0007 0010 0013 0016 0019 0022

Total length mm

Order No. 0025 0028 0031 0034 0037 0040 0043 0046

Total length mm

Order No. 0049 0052 0055 0058 0061 0064 0067

Total length mm

2 Cutting Tools

3 4 4 4 5 5 6 6

3.31 3.63 4.03 4.71 4.56 5.20 5.20 6.00

63 63 80 100 80 100 80 100

8 8 8 8

6.80 7.70 9.75

12 12 12 16 16 20 20

16.65 20.30 24.40 33.80 41.20 46.40 58.20

80 100 125 160 100 125 160 200

125 160 200 160 200 160 200

12.45 10.00 12.10 14.65 18.60

10 10 10 10

(266)

(266)

(266)

Tool bit form B, square

Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are perpendicular, straight and non-machined. ± 2 mm Cross-section: h13/h14 Application: Ground to be suitable for use as a form tool for hollowing, boring, engraving and copying in tool- and mould-making. Hardness approx. 63–68 HRC. Tolerance for form B: Length:

HSS Co10

DIN 4964

2782

2782

2782

h13/h14 mm

h13/h14 mm 10 x 10

h13/h14 mm

Order No. 0001 0004 0007 0010 0013 0016 0019 0022 0025 0028 0031

Total length mm

Order No. 0034 0037 0040 0043 0046 0049 0052 0055 0058 0061 0064

Total length mm

Order No. 0067 0070 0073 0076 0079 0082 0085 0088 0091

Total length mm

4 x 4 5 x 5 6 x 6 6 x 6 8 x 8 8 x 8 8 x 8

5.35 5.35 4.76 5.35 7.00 7.80 9.10

80 80 80 100 63 80 100 125 160 200 63

9.95

16 x 16 23.30 16 x 16 28.20 16 x 16 34.60 16 x 16 40.90 18 x 18 64.70 20 x 20 52.90 20 x 20 65.40 25 x 25 85.60 25 x 25 104.50

80 100 125 160 200 63 80 100 125 160 200

100 125 160 200 200 160 200 160 200

10 x 10 12.45 10 x 10 13.85 10 x 10 17.75 10 x 10 21.80 12 x 12 11.85 12 x 12 13.25 12 x 12 15.55 12 x 12 18.85 12 x 12 24.00 12 x 12 28.80

8 x 8 10.25 8 x 8 12.45 8 x 8 14.50

(266)

10 x 10

9.05

(266)

(266)

Tool bit form D, flat

Design: HSS Co10, DIN 4964 or ISO 5421, hardened, annealed, true to size and dressed to size. The ends are perpendicular, straight and non-machined. ± 2 mm Cross-section: h13/h14 Application: Ground to be suitable for use as a form tool for hollowing, boring, engraving and copying in tool- and mould-making. Hardness approx. 63–68 HRC. Tolerance for form D: Length:

HSS Co10

DIN 4964

2784

2784

2784

h13/h14 mm

h13/h14 mm

h13/h14 mm

Order No. 0001 0004 0007 0010 0013 0016 0019 0022

Total length mm

Order No. 0025 0028 0031 0034 0037 0040 0043 0046

Total length mm

Order No. 0049 0052 0055 0058 0061 0064

Total length mm

8 x 4 16 x 4 16 x 4 16 x 4 16 x 4 10 x 5 10 x 5 10 x 6

7.65

100 80 100 160 200 100 160 100

10 x 6 14.95 12 x 6 14.80 12 x 6 18.40 25 x 6 31.30 25 x 6 38.90 12 x 8 17.15 12 x 8 21.30 16 x 10 17.15

16 x 10 28.00 16 x 10 34.30 20 x 5 28.00 20 x 12 44.80 20 x 12 56.00 25 x 12 56.00

160 160 200 160 200 160 200 100

160 200 200 160 200 200

11.35 12.95 18.40 22.90

9.05

(266)

14.65

9.65

(266)

(266)

2/152

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).