Catalog FORMAT plus - EDE 2015 - 2017

411

Cut knurling tools

Cut knurling tool (tool only)

CNC Design: Body made of tempered steel. The special surface hardening guarantees increased wear resistance. Thanks to the carbide bushings higher speeds, faster machining and an impro- ved tool life are achieved. In addition, the tool has a modular design which allows it to be used universally as a right and left version. Conversion is simply by turning the knurling head. The clearance angle is set using the set screws on the shaft, fine adjustment for straight knurling using the adjustable knurling head. Retooling times are reduced considerably through precise positioning of the cut knurling head using the scale, simple pre-adjustment and reproducible setting parameters. Supplied without cut knurling wheel. Application: For cut knurling (chip removal). Can be used for feed knurling. The tool can be used for knurling on the workpiece according to

DIN 82: RAA, RBL, RBR. Knurled wheels: RAA

–1 piece BL 30° (for use on the left)/ 1 piece BR 30° (for use on the right)

2 Cutting Tools

RBR 30° –1 x AA RBL 30° –1 x AA Machine type: Swiss type autolathes and small lathes –CNC and conventional –centre height is integrated in the tool holder.

2952

Model

Order No.

Working area ∅ mm

Shank mm

shank length mm

Knurl required mm

0130 231-10 M 150408 384.00 0135 231-12 M 150408 384.00 0140 231-16 M 150408 384.00

3–50 3–50 3–50

10 x 10 99 12 x 12 99 16 x 16 99

15 x 4 x 8 15 x 4 x 8 15 x 4 x 8

(270)

Cut knurling tool (tool only)

Design: Body made of tempered steel. Supplied without cut knurling wheel. Application: For cut knurling (chip removal). Can be used for feed knurling. The tool can also be used for knurling on the workpiece accor-

CNC

ding to DIN 82: RGE 30° and RGE 45°. Knurling wheels: RGE 30°: 2 x AA

RGE 45°: 1 x BL 15°/1x BR 15° Machine type: Swiss type autolathes and small lathes –CNC and conventional –centre height is integrated in the tool holder.

2952

Model

Order No.

Working area ∅ mm

Shank mm

shank length mm

Knurl required mm

0151 951-12 R 100306 344.00

2–15

12 x 12 98.5

10 x 3 x 6

(270)

CNC Design: Body made of tempered steel. The special surface hardening guarantees increased wear resistance. Thanks to the carbide bushings higher speeds, faster machining and an impro- ved tool life are achieved. In addition, the tool has a modular design which allows it to be used universally as a right and left version. Conversion is simply by turning the knurling head. Ret- ooling times are reduced considerably through simple pre-adjustment and reproducible setting parameters. The tool also has a fine adjustment feature for positioning the cut knurling head for a constant knurling depth, a setting spindle and a setting scale. Synchronous setting of the knurl holding unit to the workpiece diameter is done using the central setting screw. Supplied without cut knurling wheel. Modular design: Adaptation of the shank sizes by means of adapter angle. Application: For cut knurling (chip removal). Can be used for feed knurling. The tool can be used for knurling on the workpiece according to DIN 82: RGE 30°, RGE 45°. Knurled wheels: RGE 30° –2 pieces AA RGE 45° –1 piece BL 15°/1 piece BR 15° Machine type: Lathes and automatic lathes –CNC and conventional –centre height is integra- ted in the tool holder. Cut knurling tool (tool only)

2952

Model

Order No.

Working area ∅ mm

Shank mm

shank length mm

Knurl required mm

0155 241-12 M 150408 634.50

3–50

12 x 12 114

15 x 4 x 8

(270)

Adapter bracket

2952

For shank sizes mm

Order No. 0510 0512 0516

10 x 10 12 x 12 16 x 16

50.30 50.30 50.30 (270)

2/165

Articles marked ◊ are not held in stock, procurement is effected at short notice.