Catalog FORMAT plus - EDE 2015 - 2017

51

Drilling tools

Spiral drill set with cyl. Shank

Design: Supplied in a robust, high quality plastic cassette with automatic drill setup function when opened.

HSS Co5

DIN 338

Type INOX

130°

35°

1033 1026

Note: Set consisting of (Order No. 1025).

1 Cutting Tools

Note: Set consisting of (Order No. 1026).

1033

1026

bright

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1033 1026

18 18

90 90

60 60

10 10

1033

1026

Set contents ∅ h8 mm

Order No.

Number of drills

Increasing

Piece

mm 0.5

bright

bright

0005 0007 0009

1 –10.0 1.0–10.5 1.0–13.0

141.00 m

–

19 24 25

202.00 318.00

369.00 (107) 602.00 (105)

0.5 + K.B.*

0.5

(100)

* With intermediate sizes for tapped holes: 1 piece each ∅ 3.3; 4.2; 6.8; 10.2 mm.

Spiral drill with cyl. Shank

Design: HSS-E PM, DIN 338, type GT 500 DZ TiN coated surface, right cutting, with special point geometry and ratio point thinning. Normal angle of rake, core thickness thicker than normal and without core gradient. The drill has a very good self-centring behaviour and produces short chips, even from long-chipping materials. Sturdy, powerful model, profile grin- ding, right cutting, with precise point geometry as well as special point thinning and excellent thermal resistance. Normal core gradient. Application: Suitable for short drilling depths up to 5 x D. Suitable for construction and carbon steels, high alloy steels, tool steels, castings and casting alloys, magnesium alloys, non-ferrous metals and plastics.

Type GT 500DZ

HSS-E PM

DIN 338

5xD

130°

38°

TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1021

18

15

45

40

25

15

6WHHOV XSWR

6WHHOV XSWR

1021

1021

∅ h8

∅ h8

Order No.

PU

Order No.

PU

Spiral length mm

Total length mm

Spiral length mm

Total length mm

1PP

1PP

f mm/rev

f mm/rev

mm

mm

TiN

TiN

0100 0110 0120 0130 0140 0150 0160 0170 0180 0190 0200 0210 0220 0230 0240 0250

1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5

9.00 8.90 9.10 9.70 8.90 8.60 8.70 8.80 8.70 8.80 7.40 8.10 8.90 8.90 9.20 8.00 (115)

10 12 34 10 14 36 10 16 38 10 16 38 10 18 40 10 18 40 10 20 43 10 20 43 10 22 46 10 22 46 10 24 49 10 24 49 10 27 53 10 27 53 10 30 57 10 30 57

0.012 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.040 0.040 0.040 0.040 0.040

0260 0270 0280 0290 0300 0310 0320 0330 0340 0350 0360 0370 0380 0390 0400 0410

2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1

9.80 9.10

10 30 57 10 33 61 10 33 61 10 33 61 10 33 61 10 36 65 10 36 65 10 36 65 10 39 70 10 39 70 10 39 70 10 39 70 10 43 75 10 43 75 10 43 75 10 43 75

0.050 0.050 0.050 0.050 0.050 0.050 0.063 0.063 0.063 0.063 0.063 0.063 0.063 0.063 0.063 0.063

10.10

8.90 8.50 8.90 9.70 9.80 8.80 9.20 7.60 8.30 9.20

10.70

8.60

10.00

(115)

Continued overleave

1/31

Articles marked ◊ are not held in stock, procurement is effected at short notice.