Catalog FORMAT plus - EDE 2015 - 2017

565

Tailstock centres and accessories

Constant face driver range of products CoA

Design: CoA small range of products, clamping diameter 12–50 mm, turning range 13–100 mm, hydraulic. Supplied in wooden case. Application: For efficient turning of workpieces over their entire length in one setup with greater accuracy. Design based on the modular principle, therefore universal exchange of driving discs and centring points possible. Hydraulic or mechanic pressure equalisation results in uniform clamping force even on uneven workpiece faces. Workpiece face longitudinal stop by spring-loaded centring point. Supplied: Constant face driver range of products with 1 base, 4 driving cutters, clamping diameters 12 –20 –32 –50 mm and 2 centring points, dia. A = 6 + 12 mm.

3340

MK

Order No. 0005 0010 0015 0020 0025 0030 0035 0040

Running direction

3 3 4 4 5 5 6 6

900.00

right

900.00 ◊

left

921.00

right

921.00 ◊ 975.00 ◊ 975.00 ◊ 1115.00 ◊ 1115.00 ◊

left

right

Systems

left

3 Clamping

right

left

(311)

Constant face driver range of products CoE

Design: CoE range of products, clamping diameter 12–50 mm, turning range 13–100 mm. Supplied in wooden case. Application: Ideally suitable for efficient turning of workpieces over their entire length in one setup with high accuracy. At the same time, a groove or serration can be milled. This can e.g. save changeover to a vice which translates into savings in time and costs. Design based on the modular principle, therefore universal exchange of driving discs and centring points possible. Mechanic pressure equalisation results in uniform clamping force even on uneven workpiece faces. Workpiece face longitudinal stop by spring-loaded centring point. Supplied: Constant face driver range of products with 1 base, 4 driving plates, clamping diameters 12 –20, 32 and 50 mm as well as 3 centring points, dia. 12, 20 and 32–50 mm.

3341

MK

Order No. 0005 0010 0015

Running direction

3 4 5

1050.00 ◊ 1080.00 ◊ 1130.00 ◊

Right or left Right or left Right or left

(311)

m

MICRO universal chuck

Design: With cylindrical shank for clockwise and counterclockwise rotation, with a speed range of up to 60000 min -1 and internal cooling. Balancing quality: G2.5 25000 min -1 . Application: For the transmission of high holding forces and torques in the smallest space.

L 1max L

3401

Clamping range d 1 mm

Order No.

Holding fixture d 2

Outer dia.

Open length L mm

Length, closed L 1 mm

Shank length l mm

l

D mm

1008 1010 1016 1608 1610 1616 2008 2010 2016

0.2–3.4 0.2–3.4 0.2–3.4 0.2–3.4 0.2–3.4 0.2–3.4 0.2–3.4 0.2–3.4 0.2–3.4

407.00 427.00 469.00 407.00 427.00 469.00 407.00 427.00 469.00

10 10 10 16 16 16 20 20 20

19 19 19 19 19 19 19 19 19

70 100 160 80 100 160 80 100 160

73 103 163 83 103 163 83 103 163

40 70 130 50 70 130 52

d 2

D

d 1

3401 1008

72

32

(325)

3401 1608

3401 1616

3/25

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.