Catalog FORMAT plus - EDE 2015 - 2017

585

Tool holders and accessories

Collet chuck ER

Design: DIN 2080, form A, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.016 mm. Application: To mount tools with cylindrical shank in collets to DIN 6499 (ER). Supplied: Collet chuck ER with clamping nut.

Form A

DIN 2080

3572

3572

Clamping range mm

Clamping range mm

Order No.

SK

Collet l 1 D 1 SK Collet l 1 D 1

Order No.

mm

mm

mm

mm

4160 4250 4320

1–10 1–16 2–20

59.30 42.90 45.40

40 ER16 40 ER25 40 ER32

50 25 53 45 68 50

4400 5032 5040

3–26 2–20 3–26

47.50 69.30 71.70

40 ER40 50 ER32 50 ER40

80 63 68 50 76 63

(364)

(364)

Systems

3 Clamping

Combi mount-on milling holder

Design: DIN 2080, form A, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: SK 40 = 0.01 mm, SK 50 = 0.015 mm. Application: For mounting tools with longitudinal and cross groove. Supplied: Combi shell end mill arbour complete with cutter retaining screw, driving ring and feather key.

DIN 2080

Form A

Order No. SK l 1 mm l 2 mm l 3 mm D 2 mm 4016 16 42.50 40 52 27 17 32 4022 22 42.50 40 52 31 19 40 4028 27 42.50 40 52 33 21 48 4034 32 46.20 40 52 38 24 58 4040 40 53.90 40 52 41 27 70 (370) Order No. D 1 mm 3601 SK l 1 mm l 2 mm l 3 mm D 2 mm 5016 16 58.70 50 55 27 17 32 5022 22 58.70 50 55 31 19 40 5027 27 58.70 50 55 33 21 48 5032 32 63.00 50 55 38 24 58 5040 40 65.50 50 55 41 27 70 (370) D 1 mm 3601

Milling head mounting

Design: DIN 2080, form A, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: SK 40 = 0.01 mm, SK 50 = 0.015 mm. Application: To mount tools with cross groove to DIN 1880. Supplied: Combi shell end mill arbour with cutter retaining screw.

DIN 2080

Form A

Order No. SK l 1 mm l 2 mm D 2 mm 4022 22 47.40 40 45 19 48 4027 27 47.40 40 45 21 58 4032 32 49.90 40 50 24 78 4040 40 61.20 40 55 27 88 (372) Order No. D 1 mm 3613 SK l 1 mm l 2 mm D 2 mm 5022 22 61.20 50 45 19 48 5027 27 62.40 50 45 21 58 5032 32 61.00 50 50 24 78 5040 40 77.70 50 50 27 88 (372) D 1 mm 3613

3/45

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.