Catalog FORMAT plus - EDE 2015 - 2017

593

Tool holders and accessories

m

Spacer

Design: JISB 6339 (MAS-BT), form AD, made of alloy case- hardened steel, with a core tensile strength of ca. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper according to DIN 254. Hardened 58 ± 2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Bore tolerance: H5. Balancing quality: G6.3 15000 min -1 . Application: For mounting tools with Morse taper shank and tang.

B JIS 6339 MAS/BT

Form AD

l1

3684

d1

Order No. D 1 mm l 1 mm 0002 2 45.00 50 32 60 0003 3 45.00 50 40 65 0004 4 45.00 50 48 95 (370) Inner MK BT

Precision spacer sleeve

Systems

3 Clamping

Design: JISB 6339 (MAS-BT), form AD, made of alloy case- hardened steel, with a core tensile strength of ca. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper according to DIN 254. Hardened 60 –2 HRC. All functional surfaces machined. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Bore tolerance: H5. Balancing quality: G6.3 12000 min -1 . Application: For mounting tools with Morse taper shank and tang.

B JIS 6339 MAS/BT

Form AD

l1

d1

3237

Order No. D 1 mm l 1 mm 5002 2 139.00 50 32 60 5003 3 145.00 50 40 65 5004 4 152.00 50 48 95 (394) Inner MK BT

m

Spacer

Design: JISB 6339 (MAS-BT), form AD, made of alloy case-hardened steel, with a core tensile strength of ca. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper according to DIN 254. Hardened 58 ± 2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Bore tolerance: H5. Balancing quality: G6.3 15000 min -1 . Application: For mounting tools with Morse taper shank and locking thread.

B JIS 6339 MAS/BT

Form A

l1

3683

Order No. D 1 mm l 1 mm 4001 1 41.70 40 25 50 4002 2 41.70 40 32 50 4003 3 41.70 40 40 70 4004 4 44.80 40 48 95 (370) d1 Inner MK BT

Drill chuck mounting

Design: JISB 6339 (MAS-BT), form A, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: RA < 0.001 mm. Bore tolerance: H5. Balancing quality: G6.3 15000 min -1 . Application: For mounting three-jaw chucks with internal taper accor- ding to DIN 238.

B JIS 6339 MAS/BT

Form A

3667

Order No. BT l 1 mm 4016 B 16 31.50 40 25 5016 B 16 46.30 50 32 (370) Chuck taper

3/53

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.