Catalog FORMAT plus - EDE 2015 - 2017

597

Tool holders and accessories

Extension for screw-in cutters

Design: Cylindrical shank to DIN 1835 B, with tapered design. Application: For holding milling tools with clamping thread.

3635

D1 mm

Order No. 0201 0204 0207 0210 0213 0216

M

D mm 8.5 8.5 10.5 10.5 12.5 17.0

D mm

A mm 115 160 120 160 160 160

L mm 60 100 60 100 100 100

16 16 20 20 25 32

74.30 86.40 74.30 86.40 89.90 93.30

M8 M8

12.8 12.8 17.8 17.8 20.8 28.8

M10 M10 M12 M16

(378)

Systems

3 Clamping

Miniature collet chuck for ER collets

Design: DIN 69893, form A, from special case-hardened steel for highly stressed components, with a core tensile strength of min. 1000 N/mm 2 . Hardened 58 ±2 HRC. High repeat accuracy when changing tools. Fixed axial positioning through flange contact surface. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.003 mm. Balancing quality: G6.3 12000 min -1 . Application: For mounting tools with cylindrical shank in collets according to DIN 6499 (ER). Supplied: Collet chuck cpl. with clamping nut.

DIN 69893

Form A

3729

Order No. D 1 mm l 1 mm Collet 0001 0.5– 7.0 140.00 16 100 ER11 0003 0.5–10.0 140.00 22 100 ER16 0006 1.0–16.0 140.00 35 100 ER25 0007 0.5– 7.0 165.00 16 160 ER11 0009 0.5–10.0 165.00 22 160 ER16 0011 1.0–16.0 165.00 35 160 ER25 (364) Clamping range mm

Precision HG chuck

Design: DIN 69893, form A, precision balanced. From special case- hardened steel for highly stressed components, with a core tensile strength of min. 1000 N/mm 2 . Hardened 58-2 HRC. All functional surfaces precisely machined. More precise than DIN. Shank tolerance: h6. Concentricity: < 0.003 mm on the tool (3 x d). Balancing quality: G2.5 25000 min -1 . Application: For high-precision clamping of tools with cylindrical shank, also with clamping surfaces. Very well suited for high-speed machining. Supplied: HG Clamping chuck with clamping screw and pull-out hook.

DIN 69893

Form A

l1

d1

3257 3259

HSK 63

HSK 100

3259

3257

Order No. dia. d 1 mm l 1 mm HG 0004 2– 8 181.00 212.00 ◊ 30 120 01 0007 2– 8 222.00 ◊ 271.00 ◊ 30 160 01 0016 10–14 181.00 212.00 ◊ 35 120 02 0019 10–14 231.00 ◊ 271.00 ◊ 35 160 02 0028 16–20 181.00 212.00 ◊ 48 120 03 0031 16–20 237.00 ◊ 271.00 ◊ 48 160 03 (394) (394) Clamping range mm

3/57

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.