Catalog FORMAT plus - EDE 2015 - 2017

625

Tool holders and accessories

Precision shrink-fit chuck Capto C6

Continued

Order No. dia. d 3 mm l 2 mm l 1 mm 2010 20 374.00 ◊ 33.0 42 52 100 2013 20 387.00 ◊ 33.0 42 52 130 2580 25 328.00 ◊* 44.0 53 58 80 2590 25 345.00 ◊ 44.0 53 58 90 (394) Order No. dia. d 1 mm 3286 dia. d 2 mm dia. d 3 mm l 2 mm l 1 mm 2513 25 387.00 ◊ 44.0 53 58 160 3280 32 328.00 ◊* 44.0 53 58 95 3295 32 345.00 ◊ 44.0 53 58 130 3213 32 387.00 ◊ 44.0 53 58 160 (394) dia. d 1 mm 3286 dia. d 2 mm

* Ultra short design without length setting screw

Precision short drill chuck Capto C6

Design: Polygon shank Capto C6. Chuck and shank in one piece. Clamping (using a hex spanner) essentially increases clamping force in comparison to conventional chucks. At the same time, this secures the chuck against becoming loose during left-handed rotation or being quickly decelerated from higher speeds. Taper to DIN 254. Concentricity: 0.02 mm. Balancing quality: G6.3 25000 min -1 . Application: For mounting tools with cylindrical shank. Supplied: Precision chuck with hex spanner.

Systems

3 Clamping

Order No. D 2 mm l 2 mm l 1 mm 0005 0.3– 8.0 673.00 ◊ 36 90 93 0010 0.5–13.0 644.00 ◊ 50 112 118 (325) Order No. D 1 mm 3288 D 2 mm l 2 mm l 1 mm 0015 2.5–16.0 657.00 ◊ 57 117 123 (325) D 1 mm 3288

m

Hand clamping chuck HSPF 40

Design: Basic chuck with precisely adapted intermediate flange with short taper DIN 55027/ISO 702/III. Greater holding power and accurate concentricity due to collets as three-jaw chucks. Application: Conventional and CNC machines, e.g. for turning, drilling, milling and grinding. Ideal for small series. Supplied: Security key, bolts and nuts.

3614

Clamping range mm

Order No. 0010 0005

Short taper

L mm 116 127

D mm

D 1 mm 137 167

D 2 mm

Collet

1.0–42.0 4.0–60.0

1570.00 1505.00

Size 5 Size 6

90 90

104.8 133.4

173E, 775E* 185E*, 780E*

(315)

* Available upon request.

O m

Pressure collet chuck 173E

Design: According to DIN 6343 with a smooth bore (up to ∅ 8.0 mm) or transverse grooves (from ∅ 8.5 mm). Closure range: h9, i.e. only nominal size can be clamped. Application: For workpiece clamping (bar or chuck work) in conven- tional, single-spindle lathes, e.g. with manual chucks HSPF and CNC turning machines directly in the spindle or in a collet chuck.

3615

3615

Hole mm 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0

Hole mm 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0

Order No. 0001 0004 0007 0010 0013 0016 0019 0022 0025 0028

F mm

K mm

L mm

Order No. 0031 0034 0037 0040 0043 0046 0049 0052 0055 0058

F mm

K mm

L mm

52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00

48 48 48 48 48 48 48 48 48 48

60 60 60 60 60 60 60 60 60 60

94 94 94 94 94 94 94 94 94 94

52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00 52.00

48 48 48 48 48 48 48 48 48 48

60 60 60 60 60 60 60 60 60 60

94 94 94 94 94 94 94 94 94 94

Up to ∅ 8.0 with a smooth bore, from ∅ 9,0 mm with grooves. Continued overleaf

(315)

(315)

3/85

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.