Catalog FORMAT plus - EDE 2015 - 2017

747

Digital workshop calipers

m

Digital workshop calipers without points TWIN-Cal Design: Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Auto- matic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible.

ISO 13385-1

INOX IP 67 Absolute function

Certificate

USB

Digimatic

Application: For inside, outside, depth and step measurements. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

4060

Measurement range mm

Order No. 0301 0601 1001

Reading

Jaw length mm

Hole dimension mm

300 600 1000

416.00 856.00 1295.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

90 150 150

10 20 20

(495)

m

Digital workshop calipers with points

Equipment

4 Measuring

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD 8.5 mm for 300 mm and 12.5 mm over 500 mm measuring range, inductive measurement system, with variable data output RS 232, USB and Digimatic (DATA Variable). Supplied with battery CR 2032, 3 V, in a wooden box. Function: On and automatic off switch, mm/inch switching, automatic swit- ching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each

DIN 862

Absolute function

INOX

IP 65

Certificate

RS232

USB

Digimatic

position, ± pre-set function (setting a numerical value). Application: For inside and outside measurements. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable USB (Order No. 4025 0003, Ç 4/11). Data cable Digimatic (Order No. 4025 0004, Ç 4/11). Data cable RS 232 available on request.

4061

Measurement range mm

Order No. 0301 0501 1001

Reading

Jaw length mm

Hole dimension mm

300 500 1000

431.00 811.00 1346.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

90 125 150

10 20 20

(404)

m

Digital workshop calipers with points TWIN-Cal

Design: Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Auto- matic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible.

ISO 13385-1

Absolute function

INOX

IP 67

Certificate

USB

Digimatic

Application: For inside, outside, depth and step measurements. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

4059

Measurement range mm

Order No. 0301 0601 1001

Reading

Jaw length mm

Hole dimension mm

300 600 1000

471.00 967.00 1465.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

90 150 150

10 20 20

(495)

4/19

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.