Catalog FORMAT plus - EDE 2015 - 2017

811

Angle

Steel square

Design: Made of steel, galvanised, machined on all sides. Application: For simple straightening work and marking off work.

4601 4602

Flat square

Square with base

4601

4602

4602

4601

Stock length mm 100 x 70 150 x 100 200 x 130 250 x 160 300 x 180 400 x 230 500 x 280 750 x 375 1000 x 500

Order No. 0100 0150 0200 0250 0300 0400 0500 0750 1000

Cross-section mm

4.07 5.05 6.20 6.80 8.10 9.80

6.90 8.20

20 x 5 20 x 5 20 x 5 25 x 5 25 x 5 30 x 5 30 x 5 30 x 5 30 x 5

10.75 13.10 14.90 19.55 26.70 41.90 56.70

Equipment

4 Measuring

12.10 18.45 25.10

(453)

(453)

Flat square and square with base

Design: Made of special steel, rectangularity, parallelism and planarity tolerances, flat sides, high edges and test surfaces ground. Application: For precise work in mechanical engineering and in the workshop.

DIN 875/II

Note: Flat square (Order No. 4611) and stop angle (Order No. 4612) available up to 2000 mm on request.

4603 4604 4611 4612

Flat square

Square with base

Flat square

Square with base

4612

4604

4611

4603

4604

4611

4612

4603

Stock length mm 75 x 50 100 x 70 150 x 100 200 x 130 250 x 165 300 x 175 400 x 200 500 x 250 750 x 375 1000 x 500

Order No. 0075 0100 0150 0200 0250 0300 0400 0500 0750 1000

Cross-section mm

Angle tolerance mm

7.35 7.70 9.65

8.80

7.05

8.70 9.65

15 x 5 20 x 5 25 x 5 30 x 6 35 x 7 35 x 7 35 x 7 40 x 8 45 x 10 50 x 10

0.028 0.030 0.035 0.040 0.045 0.050 0.060 0.070 0.095 0.120

10.40 14.45 19.05 24.80 31.40 48.30 61.30 96.60

10.95 14.85 18.20 25.20 32.30 48.60 57.90 93.40

12.75 16.35 22.20 27.90 46.90 61.50

12.05 16.30 23.10 33.30 46.60 79.70

106.00 144.50

117.00

145.00

124.00

(454)

(454)

(410)

(410)

4/83

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.