Catalog FORMAT plus - EDE 2015 - 2017

814

Angle

Precision test set, stainless

Design: Angle acc. to DIN 875/00, hardened and made of rustproof steel. Straightedge acc. DIN 874/00, normal steel, burnished glare-free. Supplied in a wooden box. Application: For control purposes in tool construction and production.

DIN 874/00

DIN 875/00

INOX

4627

Design

Order No. 0050

Set contents

5-piece

170.50

1 straightedge square, size 75 x 50 mm (Order No. 4621 0750) 1 die maker's square with inside measuring edge, size 25 x 20 mm (Order No. 4625 0250) 1 die maker's square with inside measuring edge, size 40 x 28 mm (Order No. 4625 0400) 1 straightedge, length 100 mm (Order No. 4761 0100) 1 gauge block scribing tip, 60 x 9 x 9 mm

(410)

Precision centre square

Design: Made of special steel, with mm graduation on the rail, upright edges and flat sides ground. Application: For centring and marking off the centre point on round discs and shafts.

Factory standard

4631

Dimensions mm 100 x 70 150 x 130 200 x 150 250 x 160 300 x 180

Order No. 0100 0150 0200 0250 0300

For shafts up to ∅ mm

Angle tolerance mm

Equipment

4 Measuring

35.40 41.60 52.50 74.50 87.20

90 190 220 230 280

0.027 0.031 0.035 0.037 0.040

(454)

Steel square 120°

Design: Made of special steel, upright edges and flat sides ground. Application: For marking and inspecting of 120°.

Factory standard

4633

Stock length mm

Order No. 0050 0075 0100

Cross-section mm

50 x 50 75 x 75 100 x 100

12.20 15.45 18.75

15 x 5 18 x 5 20 x 5

(454)

Mitre square 135° with base

Design: Made of special steel, precision finished, with equal width arms, test surfaces and flat sides ground. Application: For accurate marking off and testing of 45° for 90° corner joints.

Factory standard

4634

Stock length mm

Order No. 0120 0150 0200

Cross-section mm

Angle tolerance mm

120 x 80 150 x 100 200 x 130

21.00 23.40 31.20

20 x 5 20 x 5 25 x 5

0.032 0.035 0.040

(454)

4/86

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).