Catalog FORMAT plus - EDE 2015 - 2017

863

Measuring and testing equipment

Design: Temperature sensor with heat-resistant handle, accuracy class 2. Note: Temperature sensor only for ThermoMaster and ThermoSpot-Vision. Temperature sensor

4910 0060 m 4910 0055 4910 0050

ThermoSensor Air, protected by a metal sleeve (∅ 6.5 mm), for air and gas temperatures.

ThermoSensor Tip, for inserting into soft, highly-viscous materials.

Thermo Sensor Touch, as surface probe for solid surfaces.

4910

Measurement range

Order No. 0050 0055 0060

Length mm

–50 °C to +800 °C –50 °C to +800 °C –50 °C to +400 °C

43.40 43.40 47.50

165 165 165

0050

0060

(465)

Design: Housing with impact-protection rubber coating and illuminated LC display. Tempe- rature measurement range from –40 °C to +600 °C, optic 8:1. Integrated laser for precise targeting of the measuring point, laser class 2M / < 5 mW. The emissivity can be adjusted to between 0.10 and 0.99. The measurement value display can be switched between °C and °F, and the largest value can be displayed (max. function) and the last measurement value stored temporarily (hold function). Supplied with E-block battery 6LR61, 9 V, in carrying bag. Application: For surface temperature measurement at points which are hard to access and in dangerous areas, such as moving machine parts or electrical installations. Note: Replacement battery (Order No. 9041 0025, Ç 9/10). Infrared thermometer ThermoSpot Pro

Equipment

4 Measuring

4914

Measurement range

Order No. 0100

–40 °C to +600 °C

76.00 (465)

Infrared thermometer CondenseSpot Pro

Design: Housing with impact-protection rubber coating and illuminated LC display. Tempe- rature measurement range from –40 °C to +600 °C, optic 8:1. Integrated laser for precise targeting of the measuring point, laser class 2M / < 5 mW. The emissivity can be adjusted to between 0.10 and 0.99. The measurement value display can be switched between °C and °F, whilst still showing the lowest, average or largest value (min./avg./max. function) and the last measurement value stored temporarily (hold function). The integrated hygrometer determines the relative air humidity and calculates the dewpoint temperature. Supplied with E-block battery 6LR61, 9 V, in carrying bag. Application: For surface temperature measurement at points which are hard to access and in dangerous areas, such as moving machine parts or electrical installations, and for measurement of the ambient temperature , the relative air humidity and the dewpoint temperature. In addition, the device allows the localisation of heat bridges and possible condensation formation. Note: Replacement battery (Order No. 9041 0025, Ç 9/10).

4914

Measurement range

Order No. 0200

–40 °C to +600 °C

176.50 (465)

Material moisture analyser MoistureMaster

Design: The illuminated dot matrix display shows both graphic and numerical measurement values. With 12 coloured LEDs which display the degree of moisture or dryness of the measured material; in addition a warning signal sounds if materials are found to be wet. Menu system with 22 languages, 62 selectable material characteristic curves (56 types of wood and 6 types of building material). If not used, the device will switch off after 2 minutes. Supplied with E-block battery 6LR61, 9 V, in carrying bag. Measurement range/accuracy: aerated concrete: 0 % … 48 % / ± 1 % concrete: 0 % … 5 % / ± 0.5 % lime sand brick: 0 % … 10 % / ± 0.5 % wood: 0 % … 60 % / ± 2 % (6 % … 30 %) Application: The material humidity is stated in % when the device is placed on the material surface (non-destructive). Note: Replacement battery (Order No. 9041 0025, Ç 9/10). cement screed: 0 % … 4.5 % / ± 0.5 % anhydrite screed: 0 % … 3.1 % / ± 0.5 % gypsum plaster: 0 % … 9 % / ± 0.5 %

4927

Operating temperature °C

Order No. 0005

Dimensions mm

0–40

176.50

75 x 150 x 32

(465)

4/135

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.