Catalog FORMAT plus - EDE 2015 - 2017

Electrician's tool sets/installation pliers/cable shears 918

ESD electrician's tool set

Design: Supplied in a practical storage box made of impact-resistant plastic with foam inlay. Application: For the highest demands of assembly work in hard-to-access places in

electrics, especially where ESD tools must be used. Note: For ESD electrician's screwdrivers see Ç 6/116.

5366

Design

Order No. 0015

Set contents

8-piece

114.00

1 long-nose pliers, 115 mm 1 side-cutting pliers, 115 mm 1 slotted screwdriver, 2.5 mm 1 slotted screwdriver, 3.0 mm 1 slotted screwdriver, 3.5 mm 1 slotted screwdriver, 4.0 mm 1 Phillips screwdriver, PH 0 1 Phillips screwdriver, PH 1

(Order No. 5362 0010) (Order No. 5368 0005) (Order No. 6369 0025) (Order No. 6369 0030) (Order No. 6369 0035) (Order No. 6369 0040) (Order No. 6371 0010) (Order No. 6371 0015)

(525)

Electrical installation pliers

Design: Made of special grade, special tool steel; forged; hardened and tempered in oil. Polished head, serrated grip zones with smooth tips, for the careful gripping of single conductors. Inductively hardened precision blades. With screwed hinge for the utmost precision and play-free operation. Prominent outer edge on the jaw for working with in-wall sockets and deburring of holes. Application: For universal use in electrical installations with 6 functions: bending, de-flashing, cable-cutting, wire-stripping, crimping of ferrules (trapezoid pressing) as well as for gripping flat and round materials.

Screwed hinge

5372

Handles with multi-component plastic covers.

5372

5 Hand Tools

5373

Handles with multi-component plastic covers, with recessed grips and indented lettering, insulated up to 1000 V in line with IEC 60900, DIN EN 60900, VDE 0682/Part 201.

5373

5373

5372

Length

Order No.

Copper/aluminium cutting values ∅ mm

Copper/aluminium cutting values mm 2

Single conductor stripping values mm 2 0.7–1.5 + 2.5

Wire cross section for ferrules mm 2

mm 200

0200

36.50

41.10

15

50

0.5–2.5

(525)

(525)

m

Cable shears

Design: Made of stainless steel, with opening spring. Handles with plastic covers. Application: For the single-handed cutting of copper and aluminium cables. Note: Not suitable for steel wire and hard-drawn copper conductors.

5374

Cutting values ∅ mm

Order No. 0168

Cutting values mm 2

Length mm

4

11.10

10

168

(523)

Design: DIN ISO 5743. Made of special tool steel; forged; hardened and tempered in oil. Head chrome-plated, polished and offset for clear view of the working area , with internal opening spring, single locking lever and clamp protection. Hardened blades with precision sharpening, easy single-handed cutting, smooth, clean and without squashing. Handles with multi-component plastic covers. Application: For the single-handed cutting of copper and aluminium cables. Note: Not suitable for steel wire and hard-drawn copper conductors. Order No. Cutting values ∅ mm 5390 Cutting values mm 2 Length mm 0181 12 28.10 50 180 0220 18 35.20 70 220 (512) Cable shears, offset

5/48

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).