Catalog FORMAT plus - EDE 2015 - 2017

943

Voltage testers/valve testers/automobile light testers

Voltage testers, single-pole

Design: Tested and approved according to DIN 57680/6 and VDE 0680/6. Blades made of tool steel, insulated. The display system (LED) is integrated into the clear ABS plastic handle. With metal clip.

5563

Voltage range V

Order No. 0006

Total length mm

150–250

5.75 (543)

150

m

Voltage tester, inductive

Design: Tested and approved according to EN 61010-1 and IEC 61326. Voltage range selectable, single pole, alternating current. Made of plastic with red illuminating probe all around, audible alarm and insulated plastic clip. With visual low battery warning and automatic shutdown. Supplied with 2 AAA/LR03 micro batteries. Application: For the location of cable breaks, defect fuses in plugs and fixtures, as well as faulty switches or bulbs connected in series. Also suitable for use in airborne networks up to 400 Hz.

CAT IV

IP 65

5569

Voltage range V

Order No. 1155

Total length mm

12–1000/220–1000

15.35

155

(513)

m

Magnetic field tester, inductive

Design: Made of plastic with red illuminating probe all around, audible alarm and insulated plastic clip. With visual low battery warning and automatic shutdown. Supplied with 2 micro batteries AAA/LR03. Application: For the testing of magnetic valves in pneumatic and hydraulic systems, as well as in the servicing of oil burners. In addition, suitable for testing electrically controlled solenoid valves in vehicles or machinery of any kind.

CAT IV

IP 65

5569

Total length mm

Order No. 2155

5 Hand Tools

155

20.60 (513)

m

Voltage and phase sequence testing, without contact

Design: Alternating current. Made of shatter-resistant ABS plastic with illuminating probe all around, depending on the test result green or red as well as acoustic signal generator and insulated plastic clip. With automatic shutdown after 5 minutes. Supplied with 2 AAA/LR03 micro batteries. Application: For locating cable breaks, testing for phase balance and the phase as well as phase sequence test in three-phase systems.

IP 65 CAT IV

5568

Voltage range V

Order No. 0150

Total length mm

200–1000

39.90

153

(514)

Voltage tester, inductive

Design: For 24–1000 V, CAT III 1000 V, single-pole, alternating current. Impact-resistant casing with test probe that lights up red, integrated torch and plastic clip. Supplied with 2 AAA/LR03 micro batteries. Application: For the localising of electrical voltages in cables, plugs, bulb sockets and fuses, as well as for the finding of circuit breakers in wires and cables.

CAT III

5525

Total length mm

Order No. 0005

158

10.80 (465)

Automobile light tester

Design: For 6–24 V, bipolar. Made of brass, with steel probe, solid cable and terminal.

5565

Total length mm

Order No. 0005

120

3.70 (514)

5/73

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.